[U-Boot] [PATCH 2/2 v2] arm, i.mx27: add support for magnesium board from projectiondesign

[Stefano Babic]

Heiko Schocher wrote:
> This patch adds support for the magnesium board from
> projectiondesign. This board uses i.MX27 SoC and has
> 8MB NOR flash, 128MB NAND flash, FEC ethernet controller
> integrated into i.MX27. As this port is based on
> the imx27lite port, common config options are collected
> in include/configs/imx27lite-common.h
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>
> 
> ---
> 
> against current git://git.denx.de/u-boot-imx.git
> 
> changes since v1:
> - added comment from Stefano Babic
>   - use puts instead printf in checkboard()
> - added comments from Wolfgang Denk
>   - just one single make target
>   - use CONFIG_SYS_NAND_LARGEPAGE for setting
>     FMCR NF_FMS Bit, and not the board name.
>   - spelling check
> - collected common config options in
>   include/configs/imx27lite-common.h
> - added CONFIG_DISPLAY_BOARDINFO
> - deleted CONFIG_BOOTFILE, because
>   bootfile is also defined in
>   CONFIG_EXTRA_ENV_SETTINGS
> 
>  MAINTAINERS                         |    4 +
>  MAKEALL                             |    1 +
>  Makefile                            |    1 +
>  board/logicpd/imx27lite/imx27lite.c |   18 +++-
>  include/configs/imx27lite-common.h  |  237 +++++++++++++++++++++++++++++++++++
>  include/configs/imx27lite.h         |  200 +-----------------------------
>  include/configs/magnesium.h         |   71 +++++++++++
>  7 files changed, 335 insertions(+), 197 deletions(-)
>  create mode 100644 include/configs/imx27lite-common.h
>  create mode 100644 include/configs/magnesium.h
> 

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================