[U-Boot] [PATCH 1/1] AT91: Update otc570 board to new SoC access

Tom Tom.Rix at windriver.com
Sun Mar 7 16:40:44 CET 2010


Daniel Gorsulowski wrote:
> Tom wrote:
>> Daniel Gorsulowski wrote:
>>> Hello Tom
>>>
>>> Daniel Gorsulowski wrote:
>>>> * convert otc570 board to use c stucture SoC access
>>>> * change gpio access to at91_gpio syntax
>>>>
>>>> Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski at esd.eu>
>>>> ---
>>>> This patch requires Jens Scharsigs new SoC access patchset.
>>>> http://lists.denx.de/pipermail/u-boot/2010-February/067424.html
>>>> http://lists.denx.de/pipermail/u-boot/2010-February/067425.html
>>>> http://lists.denx.de/pipermail/u-boot/2010-February/067426.html
>>>> http://lists.denx.de/pipermail/u-boot/2010-February/067427.html
>>>> http://lists.denx.de/pipermail/u-boot/2010-February/067428.html
>>>> http://lists.denx.de/pipermail/u-boot/2010-February/067429.html
>>>> http://lists.denx.de/pipermail/u-boot/2010-February/067430.html
>>>> http://lists.denx.de/pipermail/u-boot/2010-February/067431.html
>>>> http://lists.denx.de/pipermail/u-boot/2010-February/067432.html
>>>>
>>> ...
>>>
>>> I recognized, you didn't apply this patch yet. Is there any reason, or
>>> did you
>>> simply slip this patch?
>>>
>>> Btw. I'm also missing this patch:
>>> http://lists.denx.de/pipermail/u-boot/2010-February/067779.html
>>>
>> Yes.
>> This was slipped.
>> I spent some time trying to work out which patches needed to be
>> applied to remove the build errors I was seeing with otc but
>> was unable to.
>>
>> Please send me the list of patches and oder of application.
>>
>> Tom
>>
> I just checked out u-boot-arm repository and applied my otc570 patch and Jens
> Scharsigs patch I mentioned above.
> [PATCH ARM] updates the at91 main_clock calculation
> http://lists.denx.de/pipermail/u-boot/2010-February/067779.html
> 
> After applying, build runs without errors.

I have applied the lastest version of these patches I could find.
It does build.
There are some compile warnings

soft_i2c.c: In function 'send_reset':
	soft_i2c.c:103: warning: unused variable 'pio'
	soft_i2c.c: In function 'send_start':
	soft_i2c.c:130: warning: unused variable 'pio'
	soft_i2c.c: In function 'send_stop':
	soft_i2c.c:147: warning: unused variable 'pio'
	soft_i2c.c: In function 'send_ack':
	soft_i2c.c:166: warning: unused variable 'pio'
	soft_i2c.c: In function 'write_byte':
	soft_i2c.c:185: warning: unused variable 'pio'
	soft_i2c.c: In function 'read_byte':
	soft_i2c.c:259: warning: unused variable 'pio'
	atmel_dataflash_spi.c:25:2: warning: #warning Please update to use C structur 
SoC access !
	atmel_usart.c:21:2: warning: #warning Please update to use C structur SoC access !
	ohci-at91.c:30:2: warning: #warning Please update to use C structur SoC access


Thanks
Tom


> 
> Daniel
> 
>>> Best regards,
>>> Daniel Gorsulowski



More information about the U-Boot mailing list