[U-Boot] small but important doc patch

[Wolfgang Denk]

Dear Frans Meulenbroeks,

In message <ac9c93b11002190259ob338a92n2d6aabdc6d190f49 at mail.gmail.com> you wrote:
> Dear all,
> 
> Attached a patch for doc/README.mpc8536ds.
> This patch corrects small mistake in the register list.
> These registers are 32 bits and this one starts at ....c not ....e
> 
> When using the ...c address I can boot from sd, when using the ...e
> address I cannot.
> 
> *** README.mpc8536ds.orig	2010-02-18 15:29:07.000000000 +0100
> --- README.mpc8536ds	2010-02-19 11:25:22.000000000 +0100
> ***************
> *** 98,104 ****
>   	| 0x90-0x93 | 0xFF720000 | Config Addr 3               |
>   	| 0x94-0x97 | 0x80010000 | Config Data 3               |
>   	--------------------------------------------------------
> ! 	| 0x98-0x9b | 0xFF72e40e | Config Addr 4               |
>   	| 0x9c-0x9f | 0x00000040 | Config Data 4               |
>   	--------------------------------------------------------
>   	| 0xa0-0xa3 | 0x40000001 | Config Addr 5               |
> --- 98,104 ----
>   	| 0x90-0x93 | 0xFF720000 | Config Addr 3               |
>   	| 0x94-0x97 | 0x80010000 | Config Data 3               |
>   	--------------------------------------------------------
> ! 	| 0x98-0x9b | 0xFF72e40c | Config Addr 4               |
>   	| 0x9c-0x9f | 0x00000040 | Config Data 4               |
>   	--------------------------------------------------------
>   	| 0xa0-0xa3 | 0x40000001 | Config Addr 5               |
> 
> Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks at gmail.com>

Manually applied - please get used to using git tools and the correct
format for patch submission.

Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
No journaling file system can recover your data if the disk dies.
                                 - Steve Rago in <D4Cw1p.L9E at plc.com>