[U-Boot] [PATCH v2] mpc5xxx: Remove all references to MGT5100
Detlev Zundel
dzu at denx.de
Fri Mar 12 10:01:12 CET 2010
We do not support a processor that never reached a real customer.
Signed-off-by: Detlev Zundel <dzu at denx.de>
---
MAINTAINERS | 1 -
MAKEALL | 2 -
Makefile | 24 +--
board/bc3450/bc3450.c | 56 ----
board/bc3450/mt48lc16m16a2-75.h | 13 -
board/canmb/canmb.c | 52 ----
board/canmb/mt48lc16m32s2-75.h | 13 -
board/esd/cpci5200/mt46v16m16-75.h | 5 -
board/esd/mecp5200/mt46v16m16-75.h | 5 -
board/esd/pf5200/mt46v16m16-75.h | 5 -
board/icecube/icecube.c | 60 +----
board/icecube/mt46v16m16-75.h | 5 -
board/icecube/mt46v32m16.h | 5 -
board/icecube/mt48lc16m16a2-75.h | 13 -
board/jupiter/jupiter.c | 6 -
board/mcc200/mt46v16m16-75.h | 5 -
board/mcc200/mt48lc16m16a2-75.h | 13 -
board/mcc200/mt48lc16m32s2-75.h | 13 -
board/munices/mt48lc16m16a2-75.h | 13 -
board/pm520/mt46v16m16-75.h | 5 -
board/pm520/mt48lc16m16a2-75.h | 13 -
board/pm520/pm520.c | 60 -----
board/total5200/mt48lc16m16a2-75.h | 13 -
board/total5200/mt48lc32m16a2-75.h | 5 -
board/total5200/sdram.c | 52 ----
board/total5200/sdram.h | 5 -
board/total5200/total5200.c | 27 +--
board/tqc/tqm5200/mt48lc16m16a2-75.h | 13 -
cpu/mpc5xxx/Makefile | 2 +-
cpu/mpc5xxx/cpu.c | 7 -
cpu/mpc5xxx/cpu_init.c | 35 +--
cpu/mpc5xxx/firmware_sc_task.impl.S | 364 --------------------------
cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S | 4 -
cpu/mpc5xxx/pci_mpc5200.c | 4 +-
cpu/mpc5xxx/serial.c | 17 --
cpu/mpc5xxx/start.S | 8 -
cpu/mpc5xxx/usb_ohci.c | 7 -
cpu/mpc5xxx/usb_ohci.h | 5 -
drivers/input/ps2ser.c | 11 -
drivers/net/mpc5xxx_fec.c | 10 +-
include/configs/BC3450.h | 9 +-
include/configs/IceCube.h | 13 +-
include/configs/PM520.h | 11 -
include/configs/TB5200.h | 5 -
include/configs/TQM5200.h | 5 -
include/configs/Total5200.h | 23 +--
include/configs/aev.h | 5 -
include/configs/cpci5200.h | 11 -
include/configs/hmi1001.h | 5 -
include/configs/inka4x0.h | 5 -
include/configs/ipek01.h | 5 -
include/configs/manroland/mpc5200-common.h | 5 -
include/configs/mecp5200.h | 14 -
include/configs/o2dnt.h | 7 -
include/configs/pf5200.h | 11 -
include/configs/smmaco4.h | 5 -
include/configs/spieval.h | 5 -
include/configs/v38b.h | 2 -
include/mpc5xxx.h | 69 +-----
59 files changed, 22 insertions(+), 1169 deletions(-)
delete mode 100644 cpu/mpc5xxx/firmware_sc_task.impl.S
diff --git a/MAINTAINERS b/MAINTAINERS
index 0340c19..cd196e2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -80,7 +80,6 @@ Torsten Demke <torsten.demke at fci.com>
Wolfgang Denk <wd at denx.de>
- IceCube_5100 MGT5100
IceCube_5200 MPC5200
ARIA MPC5121e
diff --git a/MAKEALL b/MAKEALL
index 1949985..e6c54b7 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -61,7 +61,6 @@ LIST_5xxx=" \
EVAL5200 \
fo300 \
galaxy5200 \
- icecube_5100 \
icecube_5200 \
inka4x0 \
ipek01 \
@@ -76,7 +75,6 @@ LIST_5xxx=" \
pf5200 \
PM520 \
TB5200 \
- Total5100 \
Total5200 \
Total5200_Rev2 \
TQM5200 \
diff --git a/Makefile b/Makefile
index ce77e10..a172a5a 100644
--- a/Makefile
+++ b/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2009
+# (C) Copyright 2000-2010
# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -549,8 +549,7 @@ icecube_5200_LOWBOOT_config \
icecube_5200_LOWBOOT08_config \
icecube_5200_DDR_config \
icecube_5200_DDR_LOWBOOT_config \
-icecube_5200_DDR_LOWBOOT08_config \
-icecube_5100_config: unconfig
+icecube_5200_DDR_LOWBOOT08_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
@@ -569,14 +568,6 @@ icecube_5100_config: unconfig
{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
$(XECHO) "... DDR memory revision" ; \
}
- @[ -z "$(findstring 5200,$@)" ] || \
- { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
- $(XECHO) "... with MPC5200 processor" ; \
- }
- @[ -z "$(findstring 5100,$@)" ] || \
- { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
- $(XECHO) "... with MGT5100 processor" ; \
- }
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
jupiter_config: unconfig
@@ -595,7 +586,6 @@ lite5200b_LOWBOOT_config: unconfig
@mkdir -p $(obj)board/icecube
@ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@ $(XECHO) "... DDR memory revision"
- @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h
@ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h
@[ -z "$(findstring _PM_,$@)" ] || \
{ echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \
@@ -605,7 +595,6 @@ lite5200b_LOWBOOT_config: unconfig
{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
$(XECHO) "... with LOWBOOT configuration" ; \
}
- @ $(XECHO) "... with MPC5200B processor"
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
mcc200_config \
@@ -729,21 +718,12 @@ TOP5200_config: unconfig
@ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
-Total5100_config \
Total5200_config \
Total5200_lowboot_config \
Total5200_Rev2_config \
Total5200_Rev2_lowboot_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/total5200
- @[ -z "$(findstring 5100,$@)" ] || \
- { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
- $(XECHO) "... with MGT5100 processor" ; \
- }
- @[ -z "$(findstring 5200,$@)" ] || \
- { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
- $(XECHO) "... with MPC5200 processor" ; \
- }
@[ -n "$(findstring Rev,$@)" ] || \
{ echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
$(XECHO) "... revision 1 board" ; \
diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
index 6fb0096..3117b5f 100644
--- a/board/bc3450/bc3450.c
+++ b/board/bc3450/bc3450.c
@@ -104,7 +104,6 @@ static void sdram_start (int hi_addr)
* is something else than 0x00000000.
*/
-#if defined(CONFIG_MPC5200)
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
@@ -204,57 +203,6 @@ phys_size_t initdram (int board_type)
return dramsize;
}
-#elif defined(CONFIG_MGT5100)
-
-phys_size_t initdram (int board_type)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup and enable SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
- *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff; /* 2G */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
- /* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
- __asm__ volatile ("sync");
-
- /* find RAM size */
- sdram_start(0);
- test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- sdram_start(1);
- test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* set SDRAM end address according to size */
- *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* Retrieve amount of SDRAM available */
- dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
int checkboard (void)
{
#if defined (CONFIG_TQM5200)
@@ -276,10 +224,6 @@ void flash_preinit(void)
* Note that CS_BOOT cannot be cleared when
* executing in flash.
*/
-#if defined(CONFIG_MGT5100)
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-#endif
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
diff --git a/board/bc3450/mt48lc16m16a2-75.h b/board/bc3450/mt48lc16m16a2-75.h
index 3f1e169..48b4321 100644
--- a/board/bc3450/mt48lc16m16a2-75.h
+++ b/board/bc3450/mt48lc16m16a2-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
/* #define SDRAM_MODE 0x008D0000 */ /* CAS latency 2 */
@@ -33,15 +32,3 @@
/*#define SDRAM_CONFIG1 0xD7322800 */ /* SDRAM controller bug workaround */
#define SDRAM_CONFIG2 0x8AD70000
/*#define SDRAM_CONFIG2 0xDDD70000 */ /* SDRAM controller bug workaround */
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/canmb/canmb.c b/board/canmb/canmb.c
index dce07bf..6ddc858 100644
--- a/board/canmb/canmb.c
+++ b/board/canmb/canmb.c
@@ -81,7 +81,6 @@ static void sdram_start (int hi_addr)
* is something else than 0x00000000.
*/
-#if defined(CONFIG_MPC5200)
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
@@ -183,57 +182,6 @@ phys_size_t initdram (int board_type)
return dramsize + dramsize2;
}
-#elif defined(CONFIG_MGT5100)
-
-phys_size_t initdram (int board_type)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup and enable SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
- *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
- /* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
- __asm__ volatile ("sync");
-
- /* find RAM size */
- sdram_start(0);
- test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- sdram_start(1);
- test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* set SDRAM end address according to size */
- *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* Retrieve amount of SDRAM available */
- dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
int checkboard (void)
{
puts ("Board: CANMB\n");
diff --git a/board/canmb/mt48lc16m32s2-75.h b/board/canmb/mt48lc16m32s2-75.h
index ffdf039..1547725 100644
--- a/board/canmb/mt48lc16m32s2-75.h
+++ b/board/canmb/mt48lc16m32s2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/esd/cpci5200/mt46v16m16-75.h b/board/esd/cpci5200/mt46v16m16-75.h
index 22d0a55..cf63806 100644
--- a/board/esd/cpci5200/mt46v16m16-75.h
+++ b/board/esd/cpci5200/mt46v16m16-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/esd/mecp5200/mt46v16m16-75.h b/board/esd/mecp5200/mt46v16m16-75.h
index 22d0a55..cf63806 100644
--- a/board/esd/mecp5200/mt46v16m16-75.h
+++ b/board/esd/mecp5200/mt46v16m16-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/esd/pf5200/mt46v16m16-75.h b/board/esd/pf5200/mt46v16m16-75.h
index 22d0a55..cf63806 100644
--- a/board/esd/pf5200/mt46v16m16-75.h
+++ b/board/esd/pf5200/mt46v16m16-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 7524461..47b2195 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -134,7 +134,6 @@ static void sdram_start (int hi_addr)
* is something else than 0x00000000.
*/
-#if defined(CONFIG_MPC5200)
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
@@ -258,65 +257,12 @@ phys_size_t initdram (int board_type)
return dramsize + dramsize2;
}
-#elif defined(CONFIG_MGT5100)
-
-phys_size_t initdram (int board_type)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup and enable SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
- *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
- /* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
- __asm__ volatile ("sync");
-
- /* find RAM size */
- sdram_start(0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- sdram_start(1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* set SDRAM end address according to size */
- *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* Retrieve amount of SDRAM available */
- dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
int checkboard (void)
{
#if defined (CONFIG_LITE5200B)
puts ("Board: Freescale Lite5200B\n");
-#elif defined(CONFIG_MPC5200)
+#else
puts ("Board: Motorola MPC5200 (IceCube)\n");
-#elif defined(CONFIG_MGT5100)
- puts ("Board: Motorola MGT5100 (IceCube)\n");
#endif
return 0;
}
@@ -329,10 +275,6 @@ void flash_preinit(void)
* Note that CS_BOOT cannot be cleared when
* executing in flash.
*/
-#if defined(CONFIG_MGT5100)
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-#endif
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
diff --git a/board/icecube/mt46v16m16-75.h b/board/icecube/mt46v16m16-75.h
index 4c0f9a7..eb85740 100644
--- a/board/icecube/mt46v16m16-75.h
+++ b/board/icecube/mt46v16m16-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/icecube/mt46v32m16.h b/board/icecube/mt46v32m16.h
index de2b48b..519bf6d 100644
--- a/board/icecube/mt46v32m16.h
+++ b/board/icecube/mt46v32m16.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/icecube/mt48lc16m16a2-75.h b/board/icecube/mt48lc16m16a2-75.h
index ffdf039..1547725 100644
--- a/board/icecube/mt48lc16m16a2-75.h
+++ b/board/icecube/mt48lc16m16a2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c
index 6e752c6..967aabd 100644
--- a/board/jupiter/jupiter.c
+++ b/board/jupiter/jupiter.c
@@ -227,10 +227,6 @@ void flash_preinit(void)
* Note that CS_BOOT cannot be cleared when
* executing in flash.
*/
-#if defined(CONFIG_MGT5100)
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-#endif
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
@@ -248,10 +244,8 @@ void flash_afterinit(ulong size)
*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
}
-#if defined(CONFIG_MPC5200)
*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
*(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-#endif
}
int update_flash_size (int flash_size)
diff --git a/board/mcc200/mt46v16m16-75.h b/board/mcc200/mt46v16m16-75.h
index f650faa..423febe 100644
--- a/board/mcc200/mt46v16m16-75.h
+++ b/board/mcc200/mt46v16m16-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/mcc200/mt48lc16m16a2-75.h b/board/mcc200/mt48lc16m16a2-75.h
index ffdf039..1547725 100644
--- a/board/mcc200/mt48lc16m16a2-75.h
+++ b/board/mcc200/mt48lc16m16a2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/mcc200/mt48lc16m32s2-75.h b/board/mcc200/mt48lc16m32s2-75.h
index ffdf039..1547725 100644
--- a/board/mcc200/mt48lc16m32s2-75.h
+++ b/board/mcc200/mt48lc16m32s2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/munices/mt48lc16m16a2-75.h b/board/munices/mt48lc16m16a2-75.h
index ffdf039..1547725 100644
--- a/board/munices/mt48lc16m16a2-75.h
+++ b/board/munices/mt48lc16m16a2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/pm520/mt46v16m16-75.h b/board/pm520/mt46v16m16-75.h
index f650faa..423febe 100644
--- a/board/pm520/mt46v16m16-75.h
+++ b/board/pm520/mt46v16m16-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/pm520/mt48lc16m16a2-75.h b/board/pm520/mt48lc16m16a2-75.h
index ffdf039..1547725 100644
--- a/board/pm520/mt48lc16m16a2-75.h
+++ b/board/pm520/mt48lc16m16a2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c
index 9da1041..d691434 100644
--- a/board/pm520/pm520.c
+++ b/board/pm520/pm520.c
@@ -84,7 +84,6 @@ static void sdram_start (int hi_addr)
* is something else than 0x00000000.
*/
-#if defined(CONFIG_MPC5200)
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
@@ -186,64 +185,9 @@ phys_size_t initdram (int board_type)
return dramsize + dramsize2;
}
-#elif defined(CONFIG_MGT5100)
-
-phys_size_t initdram (int board_type)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup and enable SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
- *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
- /* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
- __asm__ volatile ("sync");
-
- /* find RAM size */
- sdram_start(0);
- test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- sdram_start(1);
- test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* set SDRAM end address according to size */
- *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* Retrieve amount of SDRAM available */
- dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
int checkboard (void)
{
-#if defined(CONFIG_MPC5200)
puts ("Board: MicroSys PM520 \n");
-#elif defined(CONFIG_MGT5100)
- puts ("Board: MicroSys PM510 \n");
-#endif
return 0;
}
@@ -255,10 +199,6 @@ void flash_preinit(void)
* Note that CS_BOOT cannot be cleared when
* executing in flash.
*/
-#if defined(CONFIG_MGT5100)
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-#endif
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
diff --git a/board/total5200/mt48lc16m16a2-75.h b/board/total5200/mt48lc16m16a2-75.h
index 5b0923e..ae237c6 100644
--- a/board/total5200/mt48lc16m16a2-75.h
+++ b/board/total5200/mt48lc16m16a2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/total5200/mt48lc32m16a2-75.h b/board/total5200/mt48lc32m16a2-75.h
index 4b5ac80..cb4b43d 100644
--- a/board/total5200/mt48lc32m16a2-75.h
+++ b/board/total5200/mt48lc32m16a2-75.h
@@ -28,13 +28,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x514F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#else
-#error CONFIG_MPC5200 is not defined
-#endif
diff --git a/board/total5200/sdram.c b/board/total5200/sdram.c
index dc4c6f1..d883eb6 100644
--- a/board/total5200/sdram.c
+++ b/board/total5200/sdram.c
@@ -76,7 +76,6 @@ static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr)
* is something else than 0x00000000.
*/
-#if defined(CONFIG_MPC5200)
long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
{
ulong dramsize = 0;
@@ -174,54 +173,3 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
return dramsize + dramsize2;
}
-
-#elif defined(CONFIG_MGT5100)
-
-long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup and enable SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
- *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = sdram_conf->config1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = sdram_conf->config2;
-
- /* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = sdram_conf->addrsel;
- __asm__ volatile ("sync");
-
- /* find RAM size */
- mpc5xxx_sdram_start(sdram_conf, 0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- mpc5xxx_sdram_start(sdram_conf, 1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- mpc5xxx_sdram_start(sdram_conf, 0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* set SDRAM end address according to size */
- *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* Retrieve amount of SDRAM available */
- dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/total5200/sdram.h b/board/total5200/sdram.h
index bc21e1d..396a190 100644
--- a/board/total5200/sdram.h
+++ b/board/total5200/sdram.h
@@ -28,12 +28,7 @@ typedef struct {
ulong control;
ulong config1;
ulong config2;
-#if defined(CONFIG_MPC5200)
ulong tapdelay;
-#endif
-#if defined(CONFIG_MGT5100)
- ulong addrsel;
-#endif
} sdram_conf_t;
long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf);
diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c
index c524d63..61b5b80 100644
--- a/board/total5200/total5200.c
+++ b/board/total5200/total5200.c
@@ -47,26 +47,17 @@ phys_size_t initdram (int board_type)
sdram_conf.control = SDRAM_CONTROL;
sdram_conf.config1 = SDRAM_CONFIG1;
sdram_conf.config2 = SDRAM_CONFIG2;
-#if defined(CONFIG_MPC5200)
sdram_conf.tapdelay = 0;
-#endif
-#if defined(CONFIG_MGT5100)
- sdram_conf.addrsel = SDRAM_ADDRSEL;
-#endif
return mpc5xxx_sdram_init (&sdram_conf);
}
int checkboard (void)
{
-#if defined(CONFIG_MPC5200)
#if CONFIG_TOTAL5200_REV==2
puts ("Board: Total5200 Rev.2 ");
#else
puts ("Board: Total5200 ");
#endif
-#elif defined(CONFIG_MGT5100)
- puts ("Board: Total5100 ");
-#endif
/*
* Retrieve FPGA Revision.
@@ -85,20 +76,6 @@ int checkboard (void)
return 0;
}
-#if defined(CONFIG_MGT5100)
-int board_early_init_r(void)
-{
- /*
- * Now, when we are in RAM, enable CS0
- * because CS_BOOT cannot be written.
- */
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-
- return 0;
-}
-#endif
-
#ifdef CONFIG_PCI
static struct pci_controller hose;
@@ -266,9 +243,7 @@ static const S1D_REGS init_regs [] =
void video_get_info_str (int line_number, char *info)
{
if (line_number == 1) {
-#ifdef CONFIG_MGT5100
- strcpy (info, " Total5100");
-#elif CONFIG_TOTAL5200_REV==1
+#if CONFIG_TOTAL5200_REV==1
strcpy (info, " Total5200");
#elif CONFIG_TOTAL5200_REV==2
strcpy (info, " Total5200 Rev.2");
diff --git a/board/tqc/tqm5200/mt48lc16m16a2-75.h b/board/tqc/tqm5200/mt48lc16m16a2-75.h
index 3f1e169..48b4321 100644
--- a/board/tqc/tqm5200/mt48lc16m16a2-75.h
+++ b/board/tqc/tqm5200/mt48lc16m16a2-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
/* #define SDRAM_MODE 0x008D0000 */ /* CAS latency 2 */
@@ -33,15 +32,3 @@
/*#define SDRAM_CONFIG1 0xD7322800 */ /* SDRAM controller bug workaround */
#define SDRAM_CONFIG2 0x8AD70000
/*#define SDRAM_CONFIG2 0xDDD70000 */ /* SDRAM controller bug workaround */
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile
index 06fdbcf..0ee0611 100644
--- a/cpu/mpc5xxx/Makefile
+++ b/cpu/mpc5xxx/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o
-SOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o
+SOBJS = io.o firmware_sc_task_bestcomm.impl.o
COBJS = i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \
loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index edfb828..b20234d 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -50,16 +50,10 @@ int checkcpu (void)
{
ulong clock = gd->cpu_clk;
char buf[32];
-#ifndef CONFIG_MGT5100
uint svr, pvr;
-#endif
puts ("CPU: ");
-#ifdef CONFIG_MGT5100
- puts (CPU_ID_STR);
- printf (" (JTAG ID %08lx)", *(vu_long *)MPC5XXX_CDM_JTAGID);
-#else
svr = get_svr();
pvr = get_pvr();
@@ -77,7 +71,6 @@ int checkcpu (void)
printf (" v%d.%d, Core v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr),
PVR_MAJ(pvr), PVR_MIN(pvr));
-#endif
printf (" at %s MHz\n", strmhz (buf, clock));
return 0;
}
diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
index 560c9b3..9daf375 100644
--- a/cpu/mpc5xxx/cpu_init.c
+++ b/cpu/mpc5xxx/cpu_init.c
@@ -53,10 +53,6 @@ void cpu_init_f (void)
(struct mpc5xxx_gpt *) MPC5XXX_GPT;
#endif /* CONFIG_WATCHDOG */
unsigned long addecr = (1 << 25); /* Boot_CS */
-
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_MGT5100)
- addecr |= (1 << 22); /* SDRAM enable */
-#endif
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
@@ -136,7 +132,6 @@ void cpu_init_f (void)
out_be32(&lpb->cs5_cfg, CONFIG_SYS_CS5_CFG);
#endif
-#if defined(CONFIG_MPC5200)
addecr |= 1;
#if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE)
out_be32(&mm->cs6_start, START_REG(CONFIG_SYS_CS6_START));
@@ -164,14 +159,9 @@ void cpu_init_f (void)
#if defined(CONFIG_SYS_CS_DEADCYCLE)
out_be32(&lpb->cs_deadcycle, CONFIG_SYS_CS_DEADCYCLE);
#endif
-#endif /* CONFIG_MPC5200 */
/* Enable chip selects */
-#if defined(CONFIG_MGT5100)
- out_be32(&mm->addecr, addecr);
-#elif defined(CONFIG_MPC5200)
out_be32(&mm->ipbi_ws_ctrl, addecr);
-#endif
out_be32(&lpb->cs_ctrl, (1 << 24));
/* Setup pin multiplexing */
@@ -179,7 +169,6 @@ void cpu_init_f (void)
out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG);
#endif
-#if defined(CONFIG_MPC5200)
/* enable timebase */
setbits_be32(&xlb->config, (1 << 13));
@@ -187,33 +176,29 @@ void cpu_init_f (void)
setbits_be32(&xlb->config, (1 << 15));
out_be32(&xlb->snoop_window, CONFIG_SYS_SDRAM_BASE | 0x1d);
-# if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
/* Motorola reports IPB should better run at 133 MHz. */
-# if defined(CONFIG_MGT5100)
- setbits_be32(&mm->addecr, 1);
-# elif defined(CONFIG_MPC5200)
setbits_be32(&mm->ipbi_ws_ctrl, 1);
-# endif
/* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */
addecr = in_be32(&cdm->cfg);
addecr &= ~0x103;
-# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2)
+# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2)
/* pci_clk_sel = 0x01 -> IPB_CLK/2 */
addecr |= 0x01;
-# else
+# else
/* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */
addecr |= 0x02;
-# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */
+# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */
out_be32(&cdm->cfg, addecr);
-# endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
+#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
/* Configure the XLB Arbiter */
out_be32(&xlb->master_pri_enable, 0xff);
out_be32(&xlb->master_priority, 0x11111111);
-# if defined(CONFIG_SYS_XLB_PIPELINING)
+#if defined(CONFIG_SYS_XLB_PIPELINING)
/* Enable piplining */
clrbits_be32(&xlb->config, (1 << 31));
-# endif
+#endif
#if defined(CONFIG_WATCHDOG)
/* Charge the watchdog timer - prescaler = 64k, count = 64k*/
@@ -222,8 +207,6 @@ void cpu_init_f (void)
reset_5xxx_watchdog();
#endif /* CONFIG_WATCHDOG */
-
-#endif /* CONFIG_MPC5200 */
}
/*
@@ -235,11 +218,7 @@ int cpu_init_r (void)
(struct mpc5xxx_intr *) MPC5XXX_ICTL;
/* mask all interrupts */
-#if defined(CONFIG_MGT5100)
- out_be32(&intr->per_mask, 0xfffffc00);
-#elif defined(CONFIG_MPC5200)
out_be32(&intr->per_mask, 0xffffff00);
-#endif
setbits_be32(&intr->main_mask, 0x0001ffff);
clrbits_be32(&intr->ctrl, 0x00000f00);
/* route critical ints to normal ints */
diff --git a/cpu/mpc5xxx/firmware_sc_task.impl.S b/cpu/mpc5xxx/firmware_sc_task.impl.S
deleted file mode 100644
index b668ee5..0000000
--- a/cpu/mpc5xxx/firmware_sc_task.impl.S
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * Copyright (C) 2001, Software Center, Motorola China.
- *
- * This file contains microcode for the FEC controller of the MGT5100 CPU.
- */
-
-#include <config.h>
-
-#if defined(CONFIG_MGT5100)
-
-/* sas/sccg, gas target */
-.section smartdmaInitData,"aw", at progbits /* Initialized data for task variables */
-.section smartdmaTaskTable,"aw", at progbits /* Task tables */
-.globl taskTable
-taskTable:
-.globl scEthernetRecv_Entry
-scEthernetRecv_Entry: /* Task 0 */
-.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */
-.long scEthernetRecv_TDT - taskTable + 0x000000a4
-.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */
-.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */
-.long 0xf0000000
-.globl scEthernetXmit_Entry
-scEthernetXmit_Entry: /* Task 1 */
-.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */
-.long scEthernetXmit_TDT - taskTable + 0x000000d0
-.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */
-.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */
-.long 0xf0000000
-
-
-.globl scEthernetRecv_TDT
-scEthernetRecv_TDT: /* Task 0 Descriptor Table */
-.long 0xc4c50000 /* 0000: LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */
-.long 0x84c5e000 /* 0004: LCD: idx1 = var9 + var11; ; idx1 += inc0 */
-.long 0x10001f08 /* 0008: DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000380 /* 000C: DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f88 /* 0010: DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x010c504c /* 0020: DRD2B1: var4 = EU1(); EU1(var1,var12) */
-.long 0x82180349 /* 0024: LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */
-.long 0x81c68004 /* 0028: LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x70000000 /* 002C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018c504e /* 0030: DRD2B1: var6 = EU1(); EU1(var1,var14) */
-.long 0x70000000 /* 0034: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x020c504f /* 0038: DRD2B1: var8 = EU1(); EU1(var1,var15) */
-.long 0x00000b88 /* 003C: DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x8000d184 /* 0040: LCDEXT: idx1 = 0xf0003184; ; */
-.long 0xc6990452 /* 0044: LCDEXT: idx2 = var13; idx2 < var17; idx2 += inc2 */
-.long 0x81486010 /* 0048: LCD: idx3 = var2 + var16; ; idx3 += inc2 */
-.long 0x006acf88 /* 004C: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */
-.long 0x8000d184 /* 0050: LCDEXT: idx1 = 0xf0003184; ; */
-.long 0x86810492 /* 0054: LCD: idx2 = var13, idx3 = var2; idx2 < var18; idx2 += inc2, idx3 += inc2 */
-.long 0x006acf88 /* 0058: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */
-.long 0x8000d184 /* 005C: LCDEXT: idx1 = 0xf0003184; ; */
-.long 0x868184d2 /* 0060: LCD: idx2 = var13, idx3 = var3; idx2 < var19; idx2 += inc2, idx3 += inc2 */
-.long 0x000acf88 /* 0064: DRD1A: *idx3 = *idx1; FN=0 init=0 WS=1 RS=1 */
-.long 0xc318839b /* 0068: LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc3 */
-.long 0x80190000 /* 006C: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008468 /* 0070: DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4038358 /* 0074: LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc3, idx2 += inc0 */
-.long 0x81c50000 /* 0078: LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */
-.long 0x1000cb18 /* 007C: DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 0080: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc4188364 /* 0084: LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc4 */
-.long 0x83990000 /* 0088: LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */
-.long 0x10000c00 /* 008C: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x0000c800 /* 0090: DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 0094: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 0098: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 009C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080c504c /* 00A0: DRD2B1: idx0 = EU1(); EU1(var1,var12) */
-.long 0x000001f8 /* 00A4(:0): NOP */
-
-
-.globl scEthernetXmit_TDT
-scEthernetXmit_TDT: /* Task 1 Descriptor Table */
-.long 0x80014800 /* 0000: LCDEXT: idx0 = 0xf0004800; ; */
-.long 0x85c60004 /* 0004: LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x10002308 /* 0008: DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000f88 /* 000C: DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000380 /* 0010: DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x024c504d /* 0020: DRD2B1: var9 = EU1(); EU1(var1,var13) */
-.long 0x84980309 /* 0024: LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */
-.long 0xc0004003 /* 0028: LCDEXT: idx1 = 0x00000003; ; */
-.long 0x81c60004 /* 002C: LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
-.long 0x70000000 /* 0030: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x010c504e /* 0034: DRD2B1: var4 = EU1(); EU1(var1,var14) */
-.long 0x70000000 /* 0038: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x014c504f /* 003C: DRD2B1: var5 = EU1(); EU1(var1,var15) */
-.long 0x70000000 /* 0040: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x028c5050 /* 0044: DRD2B1: var10 = EU1(); EU1(var1,var16) */
-.long 0x70000000 /* 0048: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018c5051 /* 004C: DRD2B1: var6 = EU1(); EU1(var1,var17) */
-.long 0x10000b90 /* 0050: DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 0054: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x01cc50a1 /* 0058: DRD2B1: var7 = EU1(); EU1(var2,idx1) */
-.long 0xc2988312 /* 005C: LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */
-.long 0x83490000 /* 0060: LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */
-.long 0x00001b10 /* 0064: DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */
-.long 0x8000d1a4 /* 0068: LCDEXT: idx1 = 0xf00031a4; ; */
-.long 0x8301031c /* 006C: LCD: idx2 = var6, idx3 = var2; idx2 > var12; idx2 += inc3, idx3 += inc4 */
-.long 0x008ac798 /* 0070: DRD1A: *idx1 = *idx3; FN=0 init=4 WS=1 RS=1 */
-.long 0x8000d1a4 /* 0074: LCDEXT: idx1 = 0xf00031a4; ; */
-.long 0xc1430000 /* 0078: LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */
-.long 0x82998312 /* 007C: LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */
-.long 0x088ac790 /* 0080: DRD1A: *idx1 = *idx2; FN=0 TFD init=4 WS=1 RS=1 */
-.long 0x81988000 /* 0084: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x60000100 /* 0088: DRD2A: EU0=0 EU1=1 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x0c4c5c4d /* 008C: DRD2B1: *idx1 = EU1(); EU1(*idx1,var13) */
-.long 0xc21883ad /* 0090: LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */
-.long 0x80190000 /* 0094: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008460 /* 0098: DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4052305 /* 009C: LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */
-.long 0x81c98000 /* 00A0: LCD: idx3 = var3 + var19; idx3 once var0; idx3 += inc0 */
-.long 0x1000c718 /* 00A4: DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 00A8: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc4188000 /* 00AC: LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */
-.long 0x85190312 /* 00B0: LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */
-.long 0x10000c00 /* 00B4: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x1000c400 /* 00B8: DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00008860 /* 00BC: DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 00C0: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 00C4: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 00C8: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080c504d /* 00CC: DRD2B1: idx0 = EU1(); EU1(var1,var13) */
-.long 0x000001f8 /* 00D0(:0): NOP */
-
-.align 8
-
-.globl scEthernetRecv_VarTab
-scEthernetRecv_VarTab: /* Task 0 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long 0xf0004800 /* var[9] */
-.long 0x00000008 /* var[10] */
-.long 0x0000000c /* var[11] */
-.long 0x80000000 /* var[12] */
-.long 0x00000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x20000000 /* var[15] */
-.long 0x000005e4 /* var[16] */
-.long 0x0000000e /* var[17] */
-.long 0x000005e0 /* var[18] */
-.long 0x00000004 /* var[19] */
-.long 0x00000000 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x20000001 /* inc[2] */
-.long 0x80000000 /* inc[3] */
-.long 0x40000000 /* inc[4] */
-.long 0x00000000 /* inc[5] */
-.long 0x00000000 /* inc[6] */
-.long 0x00000000 /* inc[7] */
-
-.align 8
-
-.globl scEthernetXmit_VarTab
-scEthernetXmit_VarTab: /* Task 1 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long 0x00000000 /* var[9] */
-.long 0x00000000 /* var[10] */
-.long 0xf0004800 /* var[11] */
-.long 0x00000000 /* var[12] */
-.long 0x80000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x08000000 /* var[15] */
-.long 0x20000000 /* var[16] */
-.long 0x0000ffff /* var[17] */
-.long 0xffffffff /* var[18] */
-.long 0x00000008 /* var[19] */
-.long 0x00000000 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x40000000 /* inc[2] */
-.long 0x4000ffff /* inc[3] */
-.long 0xe0000001 /* inc[4] */
-.long 0x80000000 /* inc[5] */
-.long 0x00000000 /* inc[6] */
-.long 0x00000000 /* inc[7] */
-
-.align 8
-
-.globl scEthernetRecv_FDT
-scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x05800000 /* and(), EU# 1 */
-.long 0x05400000 /* andn(), EU# 1 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-.align 8
-
-.globl scEthernetXmit_FDT
-scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x05800000 /* and(), EU# 1 */
-.long 0x05400000 /* andn(), EU# 1 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-
-.align 8
-.globl scEthernetRecv_CSave
-scEthernetRecv_CSave: /* Task 0 context save space */
-.space 256, 0x0
-
-
-.align 8
-.globl scEthernetXmit_CSave
-scEthernetXmit_CSave: /* Task 1 context save space */
-.space 256, 0x0
-
-#endif /* CONFIG_MGT5100 */
diff --git a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
index d140c7e..00c2312 100644
--- a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
+++ b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
@@ -6,8 +6,6 @@
#include <config.h>
-#if defined(CONFIG_MPC5200)
-
/* sas/sccg, gas target */
.section smartdmaInitData,"aw", at progbits /* Initialized data for task variables */
.section smartdmaTaskTable,"aw", at progbits /* Task tables */
@@ -359,5 +357,3 @@ scEthernetRecv_CSave: /* Task 0 context save space */
.globl scEthernetXmit_CSave
scEthernetXmit_CSave: /* Task 1 context save space */
.space 128, 0x0
-
-#endif /* CONFIG_MPC5200 */
diff --git a/cpu/mpc5xxx/pci_mpc5200.c b/cpu/mpc5xxx/pci_mpc5200.c
index 225738a..8268f8a 100644
--- a/cpu/mpc5xxx/pci_mpc5200.c
+++ b/cpu/mpc5xxx/pci_mpc5200.c
@@ -23,7 +23,7 @@
#include <common.h>
-#if defined(CONFIG_PCI) && defined(CONFIG_MPC5200)
+#if defined(CONFIG_PCI)
#include <asm/processor.h>
#include <asm/io.h>
@@ -184,4 +184,4 @@ void pci_mpc5xxx_init (struct pci_controller *hose)
hose->last_busno = pci_hose_scan(hose);
}
-#endif /* CONFIG_PCI && CONFIG_MPC5200 */
+#endif /* CONFIG_PCI */
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
index a8a384a..6675988 100644
--- a/cpu/mpc5xxx/serial.c
+++ b/cpu/mpc5xxx/serial.c
@@ -50,8 +50,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define PSC_BASE MPC5XXX_PSC2
#elif CONFIG_PSC_CONSOLE == 3
#define PSC_BASE MPC5XXX_PSC3
-#elif defined(CONFIG_MGT5100)
-#error CONFIG_PSC_CONSOLE must be in 1, 2 or 3
#elif CONFIG_PSC_CONSOLE == 4
#define PSC_BASE MPC5XXX_PSC4
#elif CONFIG_PSC_CONSOLE == 5
@@ -73,8 +71,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define PSC_BASE2 MPC5XXX_PSC2
#elif CONFIG_PSC_CONSOLE2 == 3
#define PSC_BASE2 MPC5XXX_PSC3
-#elif defined(CONFIG_MGT5100)
-#error CONFIG_PSC_CONSOLE2 must be in 1, 2 or 3
#elif CONFIG_PSC_CONSOLE2 == 4
#define PSC_BASE2 MPC5XXX_PSC4
#elif CONFIG_PSC_CONSOLE2 == 5
@@ -104,23 +100,14 @@ int serial_init (void)
psc->command = PSC_SEL_MODE_REG_1;
/* select clock sources */
-#if defined(CONFIG_MGT5100)
- psc->psc_clock_select = 0xdd00;
- baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
-#elif defined(CONFIG_MPC5200)
psc->psc_clock_select = 0;
baseclk = (gd->ipb_clk + 16) / 32;
-#endif
/* switch to UART mode */
psc->sicr = 0;
/* configure parity, bit length and so on */
-#if defined(CONFIG_MGT5100)
- psc->mode = PSC_MODE_ERR | PSC_MODE_8_BITS | PSC_MODE_PARNONE;
-#elif defined(CONFIG_MPC5200)
psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE;
-#endif
psc->mode = PSC_MODE_ONE_STOP;
/* set up UART divisor */
@@ -246,11 +233,7 @@ void serial_setbrg(void)
#endif
unsigned long baseclk, div;
-#if defined(CONFIG_MGT5100)
- baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
-#elif defined(CONFIG_MPC5200)
baseclk = (gd->ipb_clk + 16) / 32;
-#endif
/* set up UART divisor */
div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S
index d499da5..ba49944 100644
--- a/cpu/mpc5xxx/start.S
+++ b/cpu/mpc5xxx/start.S
@@ -111,9 +111,6 @@ boot_warm:
# if defined(CONFIG_SYS_RAMBOOT)
# error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT
# endif /* CONFIG_SYS_RAMBOOT */
-# if defined(CONFIG_MGT5100)
-# error CONFIG_SYS_LOWBOOT is incompatible with MGT5100
-# endif /* CONFIG_MGT5100 */
lis r4, CONFIG_SYS_DEFAULT_MBAR at h
lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
@@ -145,14 +142,9 @@ lowboot_reentry:
#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
lis r3, CONFIG_SYS_MBAR at h
ori r3, r3, CONFIG_SYS_MBAR at l
-#if defined(CONFIG_MPC5200)
/* MBAR is mirrored into the MBAR SPR */
mtspr MBAR,r3
rlwinm r3, r3, 16, 16, 31
-#endif
-#if defined(CONFIG_MGT5100)
- rlwinm r3, r3, 17, 15, 31
-#endif
lis r4, CONFIG_SYS_DEFAULT_MBAR at h
stw r3, 0(r4)
#endif /* CONFIG_SYS_DEFAULT_MBAR */
diff --git a/cpu/mpc5xxx/usb_ohci.c b/cpu/mpc5xxx/usb_ohci.c
index 66a4af8..7976e4d 100644
--- a/cpu/mpc5xxx/usb_ohci.c
+++ b/cpu/mpc5xxx/usb_ohci.c
@@ -76,13 +76,8 @@
#define m16_swap(x) swap_16(x)
#define m32_swap(x) swap_32(x)
-#ifdef CONFIG_MPC5200
#define ohci_cpu_to_le16(x) (x)
#define ohci_cpu_to_le32(x) (x)
-#else
-#define ohci_cpu_to_le16(x) swap_16(x)
-#define ohci_cpu_to_le32(x) swap_32(x)
-#endif
/* global ohci_t */
static ohci_t gohci;
@@ -803,9 +798,7 @@ static td_t * dl_reverse_done_list (ohci_t *ohci)
} else
td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
}
-#ifdef CONFIG_MPC5200
td_list->hwNextTD = 0;
-#endif
}
td_list->next_dl_td = td_rev;
diff --git a/cpu/mpc5xxx/usb_ohci.h b/cpu/mpc5xxx/usb_ohci.h
index 6eedbdd..629b529 100644
--- a/cpu/mpc5xxx/usb_ohci.h
+++ b/cpu/mpc5xxx/usb_ohci.h
@@ -127,13 +127,8 @@ typedef struct td td_t;
#define NUM_INTS 32 /* part of the OHCI standard */
struct ohci_hcca {
__u32 int_table[NUM_INTS]; /* Interrupt ED table */
-#if defined(CONFIG_MPC5200)
__u16 pad1; /* set to 0 on each frame_no change */
__u16 frame_no; /* current frame number */
-#else
- __u16 frame_no; /* current frame number */
- __u16 pad1; /* set to 0 on each frame_no change */
-#endif
__u32 done_head; /* info returned for an interrupt */
u8 reserved_for_hc[116];
} __attribute__((aligned(256)));
diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c
index 1b20a76..8d0b6d6 100644
--- a/drivers/input/ps2ser.c
+++ b/drivers/input/ps2ser.c
@@ -36,8 +36,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define PSC_BASE MPC5XXX_PSC2
#elif CONFIG_PS2SERIAL == 3
#define PSC_BASE MPC5XXX_PSC3
-#elif defined(CONFIG_MGT5100)
-#error CONFIG_PS2SERIAL must be in 1, 2 or 3
#elif CONFIG_PS2SERIAL == 4
#define PSC_BASE MPC5XXX_PSC4
#elif CONFIG_PS2SERIAL == 5
@@ -87,23 +85,14 @@ int ps2ser_init(void)
psc->command = PSC_SEL_MODE_REG_1;
/* select clock sources */
-#if defined(CONFIG_MGT5100)
- psc->psc_clock_select = 0xdd00;
- baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
-#elif defined(CONFIG_MPC5200)
psc->psc_clock_select = 0;
baseclk = (gd->ipb_clk + 16) / 32;
-#endif
/* switch to UART mode */
psc->sicr = 0;
/* configure parity, bit length and so on */
-#if defined(CONFIG_MGT5100)
- psc->mode = PSC_MODE_ERR | PSC_MODE_8_BITS | PSC_MODE_PARNONE;
-#elif defined(CONFIG_MPC5200)
psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE;
-#endif
psc->mode = PSC_MODE_ONE_STOP;
/* set up UART divisor */
diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
index 1876b76..c2b1bbd 100644
--- a/drivers/net/mpc5xxx_fec.c
+++ b/drivers/net/mpc5xxx_fec.c
@@ -336,13 +336,11 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
*/
fec->eth->xmit_fsm = 0x03000000;
-#if defined(CONFIG_MPC5200)
/*
- * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't
+ * Turn off COMM bus prefetch in the MPC5200 BestComm. It doesn't
* work w/ the current receive task.
*/
sdma->PtdCntrl |= 0x00000001;
-#endif
/*
* Set priority of different initiators
@@ -579,9 +577,7 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
/********************************************************************/
static void mpc5xxx_fec_halt(struct eth_device *dev)
{
-#if defined(CONFIG_MPC5200)
struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA;
-#endif
mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
int counter = 0xffff;
@@ -611,13 +607,11 @@ static void mpc5xxx_fec_halt(struct eth_device *dev)
SDMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
SDMA_TASK_DISABLE (FEC_RECV_TASK_NO);
-#if defined(CONFIG_MPC5200)
/*
- * Turn on COMM bus prefetch in the MGT5200 BestComm after we're
+ * Turn on COMM bus prefetch in the MPC5200 BestComm after we're
* done. It doesn't work w/ the current receive task.
*/
sdma->PtdCntrl &= ~0x00000001;
-#endif
/*
* Disable the Ethernet Controller
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 8c5a742..44befe9 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -471,13 +471,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
-# define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
-# define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-# define CONFIG_SYS_HID0_INIT 0
-# define CONFIG_SYS_HID0_FINAL 0
-#endif
+#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL HID0_ICE
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 5ef0b77..5d3a744 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -30,6 +30,7 @@
*/
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */
#define CONFIG_ICECUBE 1 /* ... on IceCube board */
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
@@ -47,7 +48,6 @@
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
@@ -77,10 +77,6 @@
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
-#else
-#define CONFIG_MII 1
-#endif
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -169,7 +165,6 @@
#define CONFIG_BOOTCOMMAND "run flash_self"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
@@ -178,7 +173,6 @@
#else
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#endif
-#endif /* CONFIG_MPC5200 */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
@@ -338,13 +332,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#if defined(CONFIG_LITE5200B)
#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index f9687d2..22de207 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -50,7 +50,6 @@
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
@@ -75,7 +74,6 @@
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#undef CONFIG_NS8382X
-#endif
/* Partitions */
#define CONFIG_DOS_PARTITION
@@ -111,9 +109,7 @@
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_USB
-#if defined(CONFIG_MPC5200)
#define CONFIG_CMD_PCI
-#endif
/*
@@ -147,12 +143,10 @@
#define CONFIG_BOOTCOMMAND "run flash_self"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#endif
/*
* I2C configuration
*/
@@ -301,13 +295,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#if defined(CONFIG_BOOT_ROM)
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_BOOTROM_BASE
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 3438aba..6da18eb 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -430,13 +430,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 2154c78..107bff1 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -633,13 +633,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 1daa574..7510ab1 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -41,6 +41,7 @@
*/
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */
#define CONFIG_TOTAL5200 1 /* ... on Total5200 board */
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
@@ -73,7 +74,6 @@
#define CONFIG_SPLASH_SCREEN
-#ifdef CONFIG_MPC5200 /* MGT5100 PCI is not supported yet. */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
@@ -98,12 +98,6 @@
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
-#else /* MGT5100 */
-
-#define CONFIG_MII 1
-
-#endif
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -127,9 +121,7 @@
*/
#include <config_cmd_default.h>
-#if defined(CONFIG_MPC5200)
- #define CONFIG_CMD_PCI
-#endif
+#define CONFIG_CMD_PCI
#define CONFIG_CMD_BMP
#define CONFIG_CMD_EEPROM
@@ -176,12 +168,10 @@
#define CONFIG_BOOTCOMMAND "run flash_self"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#endif
/*
* I2C configuration
@@ -326,17 +316,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
-
-#if defined (CONFIG_MGT5100)
-# define CONFIG_BOARD_EARLY_INIT_R /* switch from CS_BOOT to CS0 */
-#endif
#if CONFIG_TOTAL5200_REV==1
# define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 2b4826d..98958a6 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -362,13 +362,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 52df16a..f7290d6 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -59,7 +59,6 @@
#define CONFIG_BAUDRATE 9600 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
@@ -90,8 +89,6 @@
#define CONFIG_NS8382X 1
#endif
-#endif
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -169,8 +166,6 @@
#define CONFIG_BOOTCOMMAND "run flash_vxworks0"
-#if defined(CONFIG_MPC5200)
-
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
#define CONFIG_SYS_NVRAM_BASE_ADDR 0xfd010000
#define CONFIG_SYS_NVRAM_SIZE 32*1024
@@ -179,7 +174,6 @@
* IPB Bus clocking configuration.
*/
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#endif
/*
* I2C configuration
*/
@@ -303,13 +297,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index a81527e..f9cdcbc 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -261,13 +261,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 14f7826..c5b1565 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -366,13 +366,8 @@ static inline void tws_data_config_output(unsigned output)
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index d9028fa..a51e70c 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -327,13 +327,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h
index b29ef9b..d25e093 100644
--- a/include/configs/manroland/mpc5200-common.h
+++ b/include/configs/manroland/mpc5200-common.h
@@ -170,13 +170,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 4a93b58..73405ea 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -63,9 +63,6 @@
#endif
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
-
#define CONFIG_MII
#if 0 /* test-only !!! */
#define CONFIG_NET_MULTI 1
@@ -74,10 +71,6 @@
#define CONFIG_NS8382X 1
#endif
-#else /* MPC5100 */
-
-#endif
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -152,12 +145,10 @@
#define CONFIG_BOOTCOMMAND "run flash_vxworks0"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
#undef CONFIG_SYS_IPBSPEED_133 /* define for 133MHz speed */
-#endif
/*
* I2C configuration
*/
@@ -288,13 +279,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 18e7cc2..bdc0f79 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -138,7 +138,6 @@
#define CONFIG_BOOTCOMMAND "run flash_self"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
@@ -154,7 +153,6 @@
*/
#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
#endif
-#endif
/*
* I2C configuration
@@ -276,13 +274,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 8ca55d7..80a0bc6 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -61,7 +61,6 @@
#endif
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
@@ -87,7 +86,6 @@
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
#endif
-#endif
/* Partitions */
#define CONFIG_MAC_PARTITION
@@ -121,9 +119,7 @@
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
-#ifdef CONFIG_MPC5200
#define CONFIG_CMD_PCI
-#endif
#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
@@ -166,12 +162,10 @@
#define CONFIG_BOOTCOMMAND "run flash_vxworks0"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#endif
/*
* I2C configuration
*/
@@ -289,13 +283,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 5a2ef3a..060026b 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -358,13 +358,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 27dda25..d377e19 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -438,13 +438,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 92bcdb3..d462ed0 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -170,12 +170,10 @@
#define CONFIG_BOOTCOMMAND "run net_nfs"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#endif
/*
* I2C configuration
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 4dcf90c..2d343c7 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -1,7 +1,7 @@
/*
* include/asm-ppc/mpc5xxx.h
*
- * Prototypes, etc. for the Motorola MGT5xxx/MPC5xxx
+ * Prototypes, etc. for the Motorola MPC5xxx
* embedded cpu chips
*
* 2003 (c) MontaVista, Software, Inc.
@@ -33,24 +33,15 @@
#include <asm/types.h>
/* Processor name */
-#if defined(CONFIG_MPC5200)
#define CPU_ID_STR "MPC5200"
-#elif defined(CONFIG_MGT5100)
-#define CPU_ID_STR "MGT5100"
-#endif
/* Exception offsets (PowerPC standard) */
#define EXC_OFF_SYS_RESET 0x0100
#define _START_OFFSET EXC_OFF_SYS_RESET
/* useful macros for manipulating CSx_START/STOP */
-#if defined(CONFIG_MGT5100)
-#define START_REG(start) ((start) >> 15)
-#define STOP_REG(start, size) (((start) + (size) - 1) >> 15)
-#elif defined(CONFIG_MPC5200)
#define START_REG(start) ((start) >> 16)
#define STOP_REG(start, size) (((start) + (size) - 1) >> 16)
-#endif
/* Internal memory map */
@@ -70,21 +61,12 @@
#define MPC5XXX_BOOTCS_STOP (CONFIG_SYS_MBAR + 0x0050)
#define MPC5XXX_ADDECR (CONFIG_SYS_MBAR + 0x0054)
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_SDRAM_START (CONFIG_SYS_MBAR + 0x0034)
-#define MPC5XXX_SDRAM_STOP (CONFIG_SYS_MBAR + 0x0038)
-#define MPC5XXX_PCI1_START (CONFIG_SYS_MBAR + 0x003c)
-#define MPC5XXX_PCI1_STOP (CONFIG_SYS_MBAR + 0x0040)
-#define MPC5XXX_PCI2_START (CONFIG_SYS_MBAR + 0x0044)
-#define MPC5XXX_PCI2_STOP (CONFIG_SYS_MBAR + 0x0048)
-#elif defined(CONFIG_MPC5200)
#define MPC5XXX_CS6_START (CONFIG_SYS_MBAR + 0x0058)
#define MPC5XXX_CS6_STOP (CONFIG_SYS_MBAR + 0x005c)
#define MPC5XXX_CS7_START (CONFIG_SYS_MBAR + 0x0060)
#define MPC5XXX_CS7_STOP (CONFIG_SYS_MBAR + 0x0064)
#define MPC5XXX_SDRAM_CS0CFG (CONFIG_SYS_MBAR + 0x0034)
#define MPC5XXX_SDRAM_CS1CFG (CONFIG_SYS_MBAR + 0x0038)
-#endif
#define MPC5XXX_SDRAM (CONFIG_SYS_MBAR + 0x0100)
#define MPC5XXX_CDM (CONFIG_SYS_MBAR + 0x0200)
@@ -99,18 +81,12 @@
#define MPC5XXX_SDMA (CONFIG_SYS_MBAR + 0x1200)
#define MPC5XXX_XLBARB (CONFIG_SYS_MBAR + 0x1f00)
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_PSC1 (CONFIG_SYS_MBAR + 0x2000)
-#define MPC5XXX_PSC2 (CONFIG_SYS_MBAR + 0x2400)
-#define MPC5XXX_PSC3 (CONFIG_SYS_MBAR + 0x2800)
-#elif defined(CONFIG_MPC5200)
#define MPC5XXX_PSC1 (CONFIG_SYS_MBAR + 0x2000)
#define MPC5XXX_PSC2 (CONFIG_SYS_MBAR + 0x2200)
#define MPC5XXX_PSC3 (CONFIG_SYS_MBAR + 0x2400)
#define MPC5XXX_PSC4 (CONFIG_SYS_MBAR + 0x2600)
#define MPC5XXX_PSC5 (CONFIG_SYS_MBAR + 0x2800)
#define MPC5XXX_PSC6 (CONFIG_SYS_MBAR + 0x2c00)
-#endif
#define MPC5XXX_FEC (CONFIG_SYS_MBAR + 0x3000)
#define MPC5XXX_ATA (CONFIG_SYS_MBAR + 0x3A00)
@@ -118,22 +94,14 @@
#define MPC5XXX_I2C1 (CONFIG_SYS_MBAR + 0x3D00)
#define MPC5XXX_I2C2 (CONFIG_SYS_MBAR + 0x3D40)
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_SRAM (CONFIG_SYS_MBAR + 0x4000)
-#define MPC5XXX_SRAM_SIZE (8*1024)
-#elif defined(CONFIG_MPC5200)
#define MPC5XXX_SRAM (CONFIG_SYS_MBAR + 0x8000)
#define MPC5XXX_SRAM_SIZE (16*1024)
-#endif
/* SDRAM Controller */
#define MPC5XXX_SDRAM_MODE (MPC5XXX_SDRAM + 0x0000)
#define MPC5XXX_SDRAM_CTRL (MPC5XXX_SDRAM + 0x0004)
#define MPC5XXX_SDRAM_CONFIG1 (MPC5XXX_SDRAM + 0x0008)
#define MPC5XXX_SDRAM_CONFIG2 (MPC5XXX_SDRAM + 0x000c)
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_SDRAM_XLBSEL (MPC5XXX_SDRAM + 0x0010)
-#endif
#define MPC5XXX_SDRAM_SDELAY (MPC5XXX_SDRAM + 0x0090)
/* Clock Distribution Module */
@@ -155,19 +123,15 @@
#define MPC5XXX_BOOTCS_CFG MPC5XXX_CS0_CFG
#define MPC5XXX_CS_CTRL (MPC5XXX_LPB + 0x0018)
#define MPC5XXX_CS_STATUS (MPC5XXX_LPB + 0x001c)
-#if defined(CONFIG_MPC5200)
#define MPC5XXX_CS6_CFG (MPC5XXX_LPB + 0x0020)
#define MPC5XXX_CS7_CFG (MPC5XXX_LPB + 0x0024)
#define MPC5XXX_CS_BURST (MPC5XXX_LPB + 0x0028)
#define MPC5XXX_CS_DEADCYCLE (MPC5XXX_LPB + 0x002c)
-#endif
-#if defined(CONFIG_MPC5200)
/* XLB Arbiter registers */
#define MPC5XXX_XLBARB_CFG (MPC5XXX_XLBARB + 0x40)
#define MPC5XXX_XLBARB_MPRIEN (MPC5XXX_XLBARB + 0x64)
#define MPC5XXX_XLBARB_MPRIVAL (MPC5XXX_XLBARB + 0x68)
-#endif
/* GPIO registers */
#define MPC5XXX_GPS_PORT_CONFIG (MPC5XXX_GPIO + 0x0000)
@@ -242,14 +206,6 @@
#define MPC5XXX_PCI_CFG (MPC5XXX_PCI + 0x0c)
#define MPC5XXX_PCI_BAR0 (MPC5XXX_PCI + 0x10)
#define MPC5XXX_PCI_BAR1 (MPC5XXX_PCI + 0x14)
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_PCI_CTRL (MPC5XXX_PCI + 0x68)
-#define MPC5XXX_PCI_VALMSKR (MPC5XXX_PCI + 0x6c)
-#define MPC5XXX_PCI_VALMSKW (MPC5XXX_PCI + 0x70)
-#define MPC5XXX_PCI_SUBW1 (MPC5XXX_PCI + 0x74)
-#define MPC5XXX_PCI_SUBW2 (MPC5XXX_PCI + 0x78)
-#define MPC5XXX_PCI_WINCOMMAND (MPC5XXX_PCI + 0x7c)
-#elif defined(CONFIG_MPC5200)
#define MPC5XXX_PCI_GSCR (MPC5XXX_PCI + 0x60)
#define MPC5XXX_PCI_TBATR0 (MPC5XXX_PCI + 0x64)
#define MPC5XXX_PCI_TBATR1 (MPC5XXX_PCI + 0x68)
@@ -262,7 +218,6 @@
#define MPC5XXX_PCI_ISR (MPC5XXX_PCI + 0x88)
#define MPC5XXX_PCI_ARB (MPC5XXX_PCI + 0x8c)
#define MPC5XXX_PCI_CAR (MPC5XXX_PCI + 0xf8)
-#endif
/* Interrupt Controller registers */
#define MPC5XXX_ICTL_PER_MASK (MPC5XXX_ICTL + 0x0000)
@@ -495,31 +450,16 @@ struct mpc5xxx_mmap_ctl {
volatile u32 cs4_stop;
volatile u32 cs5_start; /* 0x002c */
volatile u32 cs5_stop;
-#if defined(CONFIG_MGT5100)
- volatile u32 sdram_start; /* 0x0034 */
- volatile u32 sdram_stop; /* 0x0038 */
- volatile u32 pci1_start; /* 0x003c */
- volatile u32 pci1_stop; /* 0x0040 */
- volatile u32 pci2_start; /* 0x0044 */
- volatile u32 pci2_stop; /* 0x0048 */
-#elif defined(CONFIG_MPC5200)
volatile u32 sdram0; /* 0x0034 */
volatile u32 sdram1; /* 0x0038 */
volatile u32 dummy1[4]; /* 0x003c */
-#endif
volatile u32 boot_start; /* 0x004c */
volatile u32 boot_stop;
-#if defined(CONFIG_MGT5100)
- volatile u32 addecr; /* 0x0054 */
-#elif defined(CONFIG_MPC5200)
volatile u32 ipbi_ws_ctrl; /* 0x0054 */
-#endif
-#if defined(CONFIG_MPC5200)
volatile u32 cs6_start; /* 0x0058 */
volatile u32 cs6_stop;
volatile u32 cs7_start; /* 0x0060 */
volatile u32 cs7_stop;
-#endif
};
/* Clock distribution module */
@@ -546,12 +486,7 @@ struct mpc5xxx_sdram {
volatile u32 ctrl;
volatile u32 config1;
volatile u32 config2;
-#if defined(CONFIG_MGT5100)
- volatile u32 xlbsel;
- volatile u32 dummy[31];
-#else
volatile u32 dummy[32];
-#endif
volatile u32 sdelay;
};
@@ -564,12 +499,10 @@ struct mpc5xxx_lpb {
volatile u32 cs5_cfg;
volatile u32 cs_ctrl;
volatile u32 cs_status;
-#if defined(CONFIG_MPC5200)
volatile u32 cs6_cfg;
volatile u32 cs7_cfg;
volatile u32 cs_burst;
volatile u32 cs_deadcycle;
-#endif
};
--
1.6.2.5
More information about the U-Boot
mailing list