[U-Boot] [PATCH 05/13] ColdFire: Update M5253DEMO configuration file

[Ben Warren]

TsiChung,

On Wed, Mar 17, 2010 at 6:39 PM, TsiChung Liew <tsicliew at gmail.com> wrote:

> Fix incorrect default environment for flash erase or protect
> range. Change offset from 0 to 0xff80nnnn. Change default
> ethernet setup.
>
> Signed-off-by: TsiChung Liew <tsicliew at gmail.com>
> ---
>  include/configs/M5253DEMO.h |   12 ++++++------
>  1 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
> index 5e86e4c..051e194 100644
> --- a/include/configs/M5253DEMO.h
> +++ b/include/configs/M5253DEMO.h
> @@ -96,10 +96,10 @@
>  #      undef CONFIG_DM9000_DEBUG
>
>  #      define CONFIG_ETHADDR           00:e0:0c:bc:e5:60
> -#      define CONFIG_IPADDR            10.82.121.249
> -#      define CONFIG_NETMASK           255.255.252.0
> -#      define CONFIG_SERVERIP          10.82.120.80
> -#      define CONFIG_GATEWAYIP         10.82.123.254
> +#      define CONFIG_IPADDR            192.168.1.2
> +#      define CONFIG_NETMASK           255.255.255.0
> +#      define CONFIG_SERVERIP          192.168.1.1
> +#      define CONFIG_GATEWAYIP         192.168.1.1
>  #      define CONFIG_OVERWRITE_ETHADDR_ONCE
>
> Again, please remove these completely.

>  #      define CONFIG_EXTRA_ENV_SETTINGS                \
> @@ -109,8 +109,8 @@
>                "u-boot=u-boot.bin\0"                   \
>                "load=tftp ${loadaddr) ${u-boot}\0"     \
>                "upd=run load; run prog\0"              \
> -               "prog=prot off 0 2ffff;"        \
> -               "era 0 2ffff;"                  \
> +               "prog=prot off 0xff800000 0xff82ffff;"  \
> +               "era 0xff800000 0xff82ffff;"            \
>                "cp.b ${loadaddr} 0 ${filesize};"       \
>                "save\0"                                \
>                ""
>
> regards,
Ben