[U-Boot] [PATCH 12/28] nios2: use bitops from linux-2.6 asm-generic

[Thomas Chou]

These are needed to use ubi/ubifs.

Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
---
 include/asm-nios2/bitops.h            |   14 +--
 include/asm-nios2/bitops/atomic.h     |  189 +++++++++++++++++++++++++++++++++
 include/asm-nios2/bitops/ffs.h        |   41 +++++++
 include/asm-nios2/bitops/non-atomic.h |  108 +++++++++++++++++++
 4 files changed, 342 insertions(+), 10 deletions(-)
 create mode 100644 include/asm-nios2/bitops/atomic.h
 create mode 100644 include/asm-nios2/bitops/ffs.h
 create mode 100644 include/asm-nios2/bitops/non-atomic.h

diff --git a/include/asm-nios2/bitops.h b/include/asm-nios2/bitops.h
index 5776bda..cf48ff7 100644
--- a/include/asm-nios2/bitops.h
+++ b/include/asm-nios2/bitops.h
@@ -24,15 +24,9 @@
 #ifndef __ASM_NIOS2_BITOPS_H_
 #define __ASM_NIOS2_BITOPS_H_
 
-
-extern void set_bit(int nr, volatile void * a);
-extern void clear_bit(int nr, volatile void * a);
-extern int test_and_clear_bit(int nr, volatile void * a);
-extern void change_bit(unsigned long nr, volatile void *addr);
-extern int test_and_set_bit(int nr, volatile void * a);
-extern int test_and_change_bit(int nr, volatile void * addr);
-extern int test_bit(int nr, volatile void * a);
-extern int ffs(int i);
-#define PLATFORM_FFS
+/* copied from linux-2.6/include/asm-generic/bitops */
+#include <asm/bitops/atomic.h>
+#include <asm/bitops/non-atomic.h>
+#include <asm/bitops/ffs.h>
 
 #endif /* __ASM_NIOS2_BITOPS_H */
diff --git a/include/asm-nios2/bitops/atomic.h b/include/asm-nios2/bitops/atomic.h
new file mode 100644
index 0000000..c894646
--- /dev/null
+++ b/include/asm-nios2/bitops/atomic.h
@@ -0,0 +1,189 @@
+#ifndef _ASM_GENERIC_BITOPS_ATOMIC_H_
+#define _ASM_GENERIC_BITOPS_ATOMIC_H_
+
+#include <asm/types.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_SMP
+#include <asm/spinlock.h>
+#include <asm/cache.h>		/* we use L1_CACHE_BYTES */
+
+/* Use an array of spinlocks for our atomic_ts.
+ * Hash function to index into a different SPINLOCK.
+ * Since "a" is usually an address, use one spinlock per cacheline.
+ */
+#  define ATOMIC_HASH_SIZE 4
+#  define ATOMIC_HASH(a) (&(__atomic_hash[ (((unsigned long) a)/L1_CACHE_BYTES) & (ATOMIC_HASH_SIZE-1) ]))
+
+extern raw_spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned;
+
+/* Can't use raw_spin_lock_irq because of #include problems, so
+ * this is the substitute */
+#define _atomic_spin_lock_irqsave(l,f) do {	\
+	raw_spinlock_t *s = ATOMIC_HASH(l);	\
+	local_irq_save(f);			\
+	__raw_spin_lock(s);			\
+} while(0)
+
+#define _atomic_spin_unlock_irqrestore(l,f) do {	\
+	raw_spinlock_t *s = ATOMIC_HASH(l);		\
+	__raw_spin_unlock(s);				\
+	local_irq_restore(f);				\
+} while(0)
+
+
+#else
+#  define _atomic_spin_lock_irqsave(l,f) do { local_irq_save(f); } while (0)
+#  define _atomic_spin_unlock_irqrestore(l,f) do { local_irq_restore(f); } while (0)
+#endif
+
+/*
+ * NMI events can occur at any time, including when interrupts have been
+ * disabled by *_irqsave().  So you can get NMI events occurring while a
+ * *_bit function is holding a spin lock.  If the NMI handler also wants
+ * to do bit manipulation (and they do) then you can get a deadlock
+ * between the original caller of *_bit() and the NMI handler.
+ *
+ * by Keith Owens
+ */
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ *
+ * Note: there are no guarantees that this function will not be reordered
+ * on non x86 architectures, so if you are writing portable code,
+ * make sure not to rely on its reordering guarantees.
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	*p  |= mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	*p &= ~mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered. It may be
+ * reordered on other architectures than x86.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	*p ^= mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It may be reordered on other architectures than x86.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	old = *p;
+	*p = old | mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+
+	return (old & mask) != 0;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It can be reorderdered on other architectures other than x86.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	old = *p;
+	*p = old & ~mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+
+	return (old & mask) != 0;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	old = *p;
+	*p = old ^ mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+
+	return (old & mask) != 0;
+}
+
+#endif /* _ASM_GENERIC_BITOPS_ATOMIC_H */
diff --git a/include/asm-nios2/bitops/ffs.h b/include/asm-nios2/bitops/ffs.h
new file mode 100644
index 0000000..fbbb43a
--- /dev/null
+++ b/include/asm-nios2/bitops/ffs.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_GENERIC_BITOPS_FFS_H_
+#define _ASM_GENERIC_BITOPS_FFS_H_
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline int ffs(int x)
+{
+	int r = 1;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff)) {
+		x >>= 16;
+		r += 16;
+	}
+	if (!(x & 0xff)) {
+		x >>= 8;
+		r += 8;
+	}
+	if (!(x & 0xf)) {
+		x >>= 4;
+		r += 4;
+	}
+	if (!(x & 3)) {
+		x >>= 2;
+		r += 2;
+	}
+	if (!(x & 1)) {
+		x >>= 1;
+		r += 1;
+	}
+	return r;
+}
+
+#endif /* _ASM_GENERIC_BITOPS_FFS_H_ */
diff --git a/include/asm-nios2/bitops/non-atomic.h b/include/asm-nios2/bitops/non-atomic.h
new file mode 100644
index 0000000..697cc2b
--- /dev/null
+++ b/include/asm-nios2/bitops/non-atomic.h
@@ -0,0 +1,108 @@
+#ifndef _ASM_GENERIC_BITOPS_NON_ATOMIC_H_
+#define _ASM_GENERIC_BITOPS_NON_ATOMIC_H_
+
+#include <asm/types.h>
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+	*p  |= mask;
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+	*p &= ~mask;
+}
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+	*p ^= mask;
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old | mask;
+	return (old & mask) != 0;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old & ~mask;
+	return (old & mask) != 0;
+}
+
+/* WARNING: non atomic and it can be reordered! */
+static inline int __test_and_change_bit(int nr,
+					    volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old ^ mask;
+	return (old & mask) != 0;
+}
+
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static inline int test_bit(int nr, const volatile unsigned long *addr)
+{
+	return 1UL & (addr[BIT_WORD(nr)] >> (nr & (BITS_PER_LONG-1)));
+}
+
+#endif /* _ASM_GENERIC_BITOPS_NON_ATOMIC_H_ */
-- 
1.6.6.1