[U-Boot] [PATCH 20/28] nios2: fix writel in board/altera/common/epled.c

[Thomas Chou]

The args to writel() is changed to (val,port).

The base address is renamed to CONFIG_SYS_LED_PIO_BASE,
which is consistent with the name used in altera example
designs.

Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
---
 board/altera/common/epled.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/board/altera/common/epled.c b/board/altera/common/epled.c
index e5e7705..d092011 100644
--- a/board/altera/common/epled.c
+++ b/board/altera/common/epled.c
@@ -33,30 +33,30 @@ static led_id_t val = 0;
 
 void __led_init (led_id_t mask, int state)
 {
-	nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
+	nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LED_PIO_BASE;
 
 	if (state == STATUS_LED_ON)
 		val &= ~mask;
 	else
 		val |= mask;
-	writel (&pio->data, val);
+	writel (val, &pio->data);
 }
 
 void __led_set (led_id_t mask, int state)
 {
-	nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
+	nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LED_PIO_BASE;
 
 	if (state == STATUS_LED_ON)
 		val &= ~mask;
 	else
 		val |= mask;
-	writel (&pio->data, val);
+	writel (val, &pio->data);
 }
 
 void __led_toggle (led_id_t mask)
 {
-	nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
+	nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LED_PIO_BASE;
 
 	val ^= mask;
-	writel (&pio->data, val);
+	writel (val, &pio->data);
 }
-- 
1.6.6.1