[U-Boot] [PATCH] Add support for Indefia Nimbus Cloud Board

[Wolfgang Denk]

Dear Semih Hazar,

In message <4B6B004C.1010507 at indefia.com> you wrote:
> 
> The problem with AVR32 and the CFI flash driver has a few possible
> solutions as noted by Haavard Skinnemoen in the email [1]. The only
> thing I can do is to go with the first alternative and set the flash
> address as the virtual address which is cache-disabled and works
> flawless with the CFI driver.
> 
> That solution can also be used by other AVR32 boards, and I _think_ it
> also solves the JFFS2 scanning problem which was mentioned in [2].
> 
> The only ugly thing (for me) is when using the CFI commands, the flash
> addresses has to be shifted by 0xa0000000. (e.g. copy to flash at 0x1000
> must be written as cp.b <source> 0xa0001000 <size>).

I really dislike such an approach.  From the user interface point of
view this is unacceptable to me.


My understanding is that there are only three pretty local areas where
uncached access to the flash is needed: initialization (i. e. probing
and querying), erasing, and programming.

So it should be possible to switch off caching when entering these
functions, and turn it on again upon return.  Eventually other
architectures might want to implement such a feature, too, so adding
generic infrastructure to do that makes sense to me.

Stefan might want to comment here, too ?

In worst case (if you really cannot change the caching attributes for
the flash memory region on the fly) it might even be possible to add
some "address offset" which is strictly internal to the CFI driver
and used for the nn-cached accesses. But in now way any of this
should be visible to the end user on the command line.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Ada is PL/I trying to be Smalltalk.                 - Codoso diBlini