[U-Boot] [PATCH] SPI: added support for MX51 to mxc_spi

Liu Hui-R64343 r64343 at freescale.com
Tue Mar 23 10:01:37 CET 2010


Hi,  

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de 
> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Stefano Babic
> Sent: 2010年3月17日 0:22
> To: u-boot at lists.denx.de
> Subject: [U-Boot] [PATCH] SPI: added support for MX51 to mxc_spi
> 
> This patch add support for MX51 processor and supports 
> transfer of multiple word in a single transation.
> 
> Signed-off-by: Stefano Babic <sbabic at denx.de>
> ---
> 
> The patch adds support for the MX51 and wants to remove some 
> limitation on the old driver. Actually, the buffer passed to 
> the transfer function must be word-aligne, even if it is 
> required to send a single byte.
> 
>  drivers/spi/mxc_spi.c |  357 
> +++++++++++++++++++++++++++++++++++++++++--------
>  1 files changed, 301 insertions(+), 56 deletions(-)
> 
> diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c 
> index 3a45200..b04fadc 100644
> --- a/drivers/spi/mxc_spi.c
> +++ b/drivers/spi/mxc_spi.c
> @@ -24,6 +24,11 @@
>  #include <asm/errno.h>
>  #include <asm/io.h>
>  
> +#define MXC_CSPIRXDATA		0x00
> +#define MXC_CSPITXDATA		0x04
> +#define MXC_CSPICTRL		0x08
> +#define MXC_CSPIPERIOD_32KHZ	(1 << 15)
> +
>  #ifdef CONFIG_MX27
>  /* i.MX27 has a completely wrong register layout and 
> register definitions in the
>   * datasheet, the correct one is in the Freescale's Linux 
> driver */ @@ -31,13 +36,9 @@  #error "i.MX27 CSPI not 
> supported due to drastic differences in register definisions" 
> ¥  "See linux mxc_spi driver from Freescale for details."
>  
> -#else
> -
> +#elif defined(CONFIG_MX31)
>  #include <asm/arch/mx31.h>
>  
> -#define MXC_CSPIRXDATA		0x00
> -#define MXC_CSPITXDATA		0x04
> -#define MXC_CSPICTRL		0x08
>  #define MXC_CSPIINT		0x0C
>  #define MXC_CSPIDMA		0x10
>  #define MXC_CSPISTAT		0x14
> @@ -56,21 +57,63 @@
>  #define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 24)
>  #define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0x1f) << 8)
>  #define MXC_CSPICTRL_DATARATE(x)	(((x) & 0x7) << 16)
> +#define MXC_CSPICTRL_MAXBITS	0x1f
> +#define MXC_CSPICTRL_TC		(1 << 8)
> +#define MXC_CSPICTRL_RXOVF	(1 << 6)
>  
>  #define MXC_CSPIPERIOD_32KHZ	(1 << 15)
> +#define MAX_SPI_BYTES	4
>  
>  static unsigned long spi_bases[] = {
>  	0x43fa4000,
>  	0x50010000,
>  	0x53f84000,
>  };
Here hardcode the value in mx31, while in mx51 it use the macro. Which makes
Code style not consistent. 

> +#elif defined(CONFIG_MX51)
> +
> +#define MXC_CSPICON		0x0C
> +#define MXC_CSPIINT		0x10
> +#define MXC_CSPIDMA		0x14
> +#define MXC_CSPISTAT		0x18
> +#define MXC_CSPIPERIOD		0x1C
> +#define MXC_CSPIRESET		0x00
>  
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/clock.h>
> +#define MXC_CSPICTRL_EN		(1 << 0)
> +#define MXC_CSPICTRL_MODE	(1 << 1)
> +#define MXC_CSPICTRL_XCH	(1 << 2)
> +#define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 12)
> +#define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0xfff) << 20)
> +#define MXC_CSPICTRL_PREDIV(x)	(((x) & 0xF) << 12)
> +#define MXC_CSPICTRL_POSTDIV(x)	(((x) & 0xF) << 8)
> +#define MXC_CSPICTRL_SELCHAN(x)	(((x) & 0x3) << 18)
> +#define MXC_CSPICTRL_MAXBITS	0xfff
> +#define MXC_CSPICTRL_TC		(1 << 7)
> +#define MXC_CSPICTRL_RXOVF	(1 << 6)
> +
> +/* Bit position inside CTRL register to be associated with SS */
> +#define MXC_CSPICTRL_CHAN	18
> +
> +/* Bit position inside CON register to be associated with SS */
> +#define MXC_CSPICON_POL		4
> +#define MXC_CSPICON_PHA		0
> +#define MXC_CSPICON_SSPOL	12
> +
> +static unsigned long spi_bases[] = {
> +	CSPI1_BASE_ADDR,
> +	CSPI2_BASE_ADDR,
> +	CSPI3_BASE_ADDR,
> +};
See above comments.

> +#else
> +#error "Unsupported architecture"
>  #endif
>  
>  struct mxc_spi_slave {
>  	struct spi_slave slave;
>  	unsigned long	base;
>  	u32		ctrl_reg;
> +	u32		cfg_reg;
>  	int		gpio;
>  };
Only MX51 use it, MX31 will not use it.

>  
> @@ -89,71 +132,262 @@ static inline void reg_write(unsigned 
> long addr, u32 val)
>  	*(volatile unsigned long*)addr = val;
>  }
>  
> -static u32 spi_xchg_single(struct spi_slave *slave, u32 
> data, int bitlen,
> -			   unsigned long flags)
> +void spi_cs_activate(struct spi_slave *slave)
>  {
> +#ifdef CONFIG_MX31
>  	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
> -	unsigned int cfg_reg = reg_read(mxcs->base + MXC_CSPICTRL);
> -
> -	mxcs->ctrl_reg = (mxcs->ctrl_reg & ‾MXC_CSPICTRL_BITCOUNT(31)) |
> -		MXC_CSPICTRL_BITCOUNT(bitlen - 1);
> +	if (mxcs->gpio > 0)
> +		mx31_gpio_set(mxcs->gpio, mxcs->ctrl_reg & 
> MXC_CSPICTRL_SSPOL); 
> +#endif }
>  
> -	if (cfg_reg != mxcs->ctrl_reg)
> -		reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg);
> +void spi_cs_deactivate(struct spi_slave *slave) {
> +	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); #ifdef 
> +CONFIG_MX31
> +	if (mxcs->gpio > 0)
> +		mx31_gpio_set(mxcs->gpio,
> +			      !(mxcs->ctrl_reg & 
> MXC_CSPICTRL_SSPOL)); #endif
> +	reg_write(mxcs->base + MXC_CSPICTRL, 0); }
>  
> -	if (mxcs->gpio > 0 && (flags & SPI_XFER_BEGIN))
> -		mx31_gpio_set(mxcs->gpio, mxcs->ctrl_reg & 
> MXC_CSPICTRL_SSPOL);
> +static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs,
> +		unsigned int max_hz, unsigned int mode) {
> +	u32 clk_src = mxc_get_clock(MXC_CSPI_CLK);
> +	s32 pre_div = 0, post_div = 0, i, reg_ctrl, reg_config;
> +	u32 ss_pol = 0, sclkpol = 0, sclkpha = 0;
>  
> -	reg_write(mxcs->base + MXC_CSPITXDATA, data);
> +	if (max_hz == 0) {
> +		printf("Error: desired clock is 0¥n");
> +		return -1;
> +	}
>  
> -	reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | 
> MXC_CSPICTRL_XCH);
> +	reg_ctrl = reg_read(mxcs->base + MXC_CSPICTRL);
>  
> -	while (reg_read(mxcs->base + MXC_CSPICTRL) & MXC_CSPICTRL_XCH)
> -		;
> +	/* Reset spi */
> +	reg_write(mxcs->base + MXC_CSPICTRL, 0);
> +	reg_write(mxcs->base + MXC_CSPICTRL, (reg_ctrl | 0x1));
>  
> -	if (mxcs->gpio > 0 && (flags & SPI_XFER_END)) {
> -		mx31_gpio_set(mxcs->gpio,
> -			      !(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL));
> +	/*
> +	 * The following computation is taken directly from 
> Freescale's code.
> +	 */
> +	if (clk_src > max_hz) {
> +		pre_div = clk_src / max_hz;
> +		if (pre_div > 16) {
> +			post_div = pre_div / 16;
> +			pre_div = 15;
> +		}
> +		if (post_div != 0) {
> +			for (i = 0; i < 16; i++) {
> +				if ((1 << i) >= post_div)
> +					break;
> +			}
> +			if (i == 16) {
> +				printf("Error: no divider for 
> the freq: %d¥n",
> +					max_hz);
> +				return -1;
> +			}
> +			post_div = i;
> +		}
>  	}
>  
> -	return reg_read(mxcs->base + MXC_CSPIRXDATA);
> +	debug("pre_div = %d, post_div=%d¥n", pre_div, post_div);
> +	reg_ctrl = (reg_ctrl & ‾MXC_CSPICTRL_SELCHAN(3)) |
> +		MXC_CSPICTRL_SELCHAN(cs);
> +	reg_ctrl = (reg_ctrl & ‾MXC_CSPICTRL_PREDIV(0x0F)) |
> +		MXC_CSPICTRL_PREDIV(pre_div);
> +	reg_ctrl = (reg_ctrl & ‾MXC_CSPICTRL_POSTDIV(0x0F)) |
> +		MXC_CSPICTRL_POSTDIV(post_div);
> +
> +	/* always set to master mode */
> +	reg_ctrl |= 1 << (cs + 4);
> +
> +	/* We need to disable SPI before changing registers */
> +	reg_ctrl &= ‾MXC_CSPICTRL_EN;
> +
> +	if (mode & SPI_CS_HIGH)
> +		ss_pol = 1;
> +
> +	if (!(mode & SPI_CPOL))
> +		sclkpol = 1;
> +
> +	if (mode & SPI_CPHA)
> +		sclkpha = 1;
> +
> +	reg_config = reg_read(mxcs->base + MXC_CSPICON);
> +
> +	/*
> +	 * Configuration register setup
> +	 * The MX51 has support different setup for each SS
> +	 */
> +	reg_config = (reg_config & ‾(1 << (cs + MXC_CSPICON_SSPOL))) |
> +		(ss_pol << (cs + MXC_CSPICON_SSPOL));
> +	reg_config = (reg_config & ‾(1 << (cs + MXC_CSPICON_POL))) |
> +		(sclkpol << (cs + MXC_CSPICON_POL));
> +	reg_config = (reg_config & ‾(1 << (cs + MXC_CSPICON_PHA))) |
> +		(sclkpha << (cs + MXC_CSPICON_PHA));
> +
> +	debug("reg_ctrl = 0x%x¥n", reg_ctrl);
> +	reg_write(mxcs->base + MXC_CSPICTRL, reg_ctrl);
> +	debug("reg_config = 0x%x¥n", reg_config);
> +	reg_write(mxcs->base + MXC_CSPICON, reg_config);
> +
> +	/* save config register and control register */
> +	mxcs->ctrl_reg = reg_ctrl;
> +	mxcs->cfg_reg = reg_config;
> +
> +	/* clear interrupt reg */
> +	reg_write(mxcs->base + MXC_CSPIINT, 0);
> +	reg_write(mxcs->base + MXC_CSPISTAT,
> +		MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
> +
> +	return 0;
>  }

The function spi_cfg only used in MX51, will have compile warnings for MX31.
Use CONFIG_MX51 to cover it.
>  
> -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, 
> const void *dout,
> -		void *din, unsigned long flags)
> +static int spi_xchg_single(struct spi_slave *slave, unsigned 
> int bitlen,
> +	const void *dout, void *din, unsigned long flags)
>  {
> -	int n_blks = (bitlen + 31) / 32;
> -	u32 *out_l, *in_l;
> -	int i;
> +	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
> +	int n_bytes = (bitlen + 7) / 8;
> +	int n_blks = (n_bytes + 3) / 4;
> +	int cnt_blk;
> +	u32 tmpdata;
> +	u32 spare_bytes = 0;
> +	int j;
> +	char *pbuf;
> +
> +	debug("spi_xchg: %d %d %d¥n", bitlen, n_bytes, n_blks);
> +
> +	if (flags & SPI_XFER_BEGIN)
> +		spi_cs_activate(slave);
> +
> +	mxcs->ctrl_reg = (mxcs->ctrl_reg &
> +		‾MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS)) |
> +		MXC_CSPICTRL_BITCOUNT(n_bytes * 8 - 1);
> +
> +	/* Enable SPI controller */
> +	reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | 
> +MXC_CSPICTRL_EN); #ifdef CONFIG_MX51
> +	reg_write(mxcs->base + MXC_CSPICON, mxcs->cfg_reg); #endif
>  
> -	if ((int)dout & 3 || (int)din & 3) {
> -		printf("Error: unaligned buffers in: %p, out: 
> %p¥n", din, dout);
> -		return 1;
> +	/* Clear interrupt register */
> +	reg_write(mxcs->base + MXC_CSPISTAT,
> +		MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
> +
> +	for (cnt_blk = 0, pbuf = (char *)dout; cnt_blk < 
> n_blks; cnt_blk++) {
> +		tmpdata = 0;
> +		for (j = 0; j < 4; j++) {
> +			/*
> +			 * According to the User Manual, only the n
> +			 * least-significant bits in the first word
> +			 * will be shifted out. The remaining bits
> +			 * in first word will be ignored
> +			 */
> +			if (n_bytes > 0) {
> +				/*
> +				 * Check for the first word. If 
> the number of
> +				 * bytes is not multiple of a 
> word, only a
> +				 * part of the first word is shifted out
> +				 * and must be written in TX FIFO.
> +				 * For example, sending 5 bytes 
> means to write
> +				 * a single byte first, 
> followed by 4 words.

Comments is wrong, should be "followed by 4 bytes"

> +				 */
> +				if ((cnt_blk == 0) && (bitlen % 32) &&
> +					(j >= ((bitlen % 32) / 8))) {
> +					continue;
> +				}
> +				if (pbuf)
> +					tmpdata = *pbuf++ | 
> (tmpdata <<  8);
> +				n_bytes--;
> +			}
> +		}
> +		debug("writing TX FIFO 0x%x¥n", tmpdata);
> +		reg_write(mxcs->base + MXC_CSPITXDATA, tmpdata);
>  	}
Can use word copy for the left part(cnt_blk !=0)  to get high performance.

>  
> -	/* This driver is currently partly broken, alert the user */
> -	if (bitlen > 16 && (bitlen % 32)) {
> -		printf("Error: SPI transfer with bitlen=%d is 
> broken.¥n",
> -		       bitlen);
> -		return 1;
> -	}
> +	/* FIFO is written, now starts the transfer setting the 
> XCH bit */
> +	reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg |
> +		MXC_CSPICTRL_EN | MXC_CSPICTRL_XCH);
> +
> +	/* Wait until the TC (Transfer completed) bit is set */
> +	while ((reg_read(mxcs->base + MXC_CSPISTAT) & 
> MXC_CSPICTRL_TC) == 0)
> +		;
> +
> +	/* Transfer completed, clear any pending request */
> +	reg_write(mxcs->base + MXC_CSPISTAT,
> +		MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
>  
> -	for (i = 0, in_l = (u32 *)din, out_l = (u32 *)dout;
> -	     i < n_blks;
> -	     i++, in_l++, out_l++, bitlen -= 32) {
> -		u32 data = spi_xchg_single(slave, *out_l, 
> bitlen, flags);
> -
> -		/* Check if we're only transfering 8 or 16 bits */
> -		if (!i) {
> -			if (bitlen < 9)
> -				*(u8 *)din = data;
> -			else if (bitlen < 17)
> -				*(u16 *)din = data;
> -			else
> -				*in_l = data;
> +	/*
> +	 * Now do the opposite: copy only part of the first word
> +	 * if the number of bytes is not multiple of a word size.
> +	 */
> +	n_bytes = (bitlen + 7) / 8;
> +	for (cnt_blk = 0, pbuf = (char *)din; n_bytes > 0; cnt_blk++) {
> +		tmpdata = reg_read(mxcs->base + MXC_CSPIRXDATA);
> +		debug("value_read 0x%x¥n", tmpdata);
> +		for (j = 0; j < 4; j++) {
> +			if (n_bytes > 0) {
> +				/*
> +				 * If it is the first word, 
> compute how many
> +				 * bytes must be copied
> +				 */
> +				if (cnt_blk == 0)
> +					spare_bytes = (bitlen % 32) / 8;
> +
> +				if ((cnt_blk == 0) && (bitlen % 32) &&
> +					(j >= spare_bytes))
> +						continue;
> +
> +				if (din)
> +					*pbuf++ = (tmpdata >>
> +						((3 - 
> spare_bytes - j) * 8))

The RX path should be logic wrong, spare_bytes not reset to zero and the data got not correct when data is not 4B alignement. 

> +						& 0xFF;
> +
> +				n_bytes--;
> +			}
>  		}
>  	}
>  
> +	if (flags & SPI_XFER_END)
> +		spi_cs_deactivate(slave);
> +
> +	return 0;
> +}
> +
> +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, 
> const void *dout,
> +		void *din, unsigned long flags)
> +{
> +	int n_bytes = (bitlen + 7) / 8;
> +	int n_bits;
> +	int ret;
> +	u32 blk_size;
> +	char *p_outbuf = (char *)dout;
> +	char *p_inbuf = (char *)din;
> +
> +	if (!slave)
> +		return -1;
> +
> +	while (n_bytes > 0) {
> +		if (n_bytes < MAX_SPI_BYTES)
> +			blk_size = n_bytes;
> +		else
> +			blk_size = MAX_SPI_BYTES;
> +
> +		n_bits = blk_size * 8;
> +
> +		ret = spi_xchg_single(slave, n_bits, dout, din, flags);
> +		if (ret)
> +			return ret;
> +		if (dout)
> +			p_outbuf += blk_size;
> +		if (din)
> +			p_inbuf += blk_size;
> +		n_bytes -= blk_size;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -163,8 +397,7 @@ void spi_init(void)
>  
>  static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs)  {
> -	int ret;
> -
> +	int ret = 0;
>  	/*
>  	 * Some SPI devices require active chip-select over multiple
>  	 * transactions, we achieve this using a GPIO. Still, 
> the SPI @@ -176,11 +409,13 @@ static int decode_cs(struct 
> mxc_spi_slave *mxcs, unsigned int cs)
>  	if (cs > 3) {
>  		mxcs->gpio = cs >> 8;
>  		cs &= 3;
> +#ifdef CONFIG_MX31
>  		ret = mx31_gpio_direction(mxcs->gpio, 
> MX31_GPIO_DIRECTION_OUT);
>  		if (ret) {
>  			printf("mxc_spi: cannot setup gpio 
> %d¥n", mxcs->gpio);
>  			return -EINVAL;
>  		}
> +#endif
>  	} else {
>  		mxcs->gpio = -1;
>  	}
> @@ -191,7 +426,6 @@ static int decode_cs(struct mxc_spi_slave 
> *mxcs, unsigned int cs)  struct spi_slave 
> *spi_setup_slave(unsigned int bus, unsigned int cs,
>  			unsigned int max_hz, unsigned int mode)  {
> -	unsigned int ctrl_reg;
>  	struct mxc_spi_slave *mxcs;
>  	int ret;
>  
> @@ -210,6 +444,19 @@ struct spi_slave 
> *spi_setup_slave(unsigned int bus, unsigned int cs,
>  
>  	cs = ret;
>  
> +	mxcs->slave.bus = bus;
> +	mxcs->slave.cs = cs;
> +	mxcs->base = spi_bases[bus];
> +
> +#ifdef CONFIG_MX51
> +	/* Can be used for i.MX31 too ? */
> +	ret = spi_cfg(mxcs, cs, max_hz, mode);
> +	if (ret) {
> +		printf("mxc_spi: cannot setup SPI controller¥n");
> +		free(mxcs);
> +		return NULL;
> +	}
> +#else
>  	ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) |
>  		MXC_CSPICTRL_BITCOUNT(31) |
>  		MXC_CSPICTRL_DATARATE(7) | /* FIXME: calculate 
> data rate */ @@ -223,10 +470,8 @@ struct spi_slave 
> *spi_setup_slave(unsigned int bus, unsigned int cs,
>  	if (mode & SPI_CS_HIGH)
>  		ctrl_reg |= MXC_CSPICTRL_SSPOL;
>  
> -	mxcs->slave.bus = bus;
> -	mxcs->slave.cs = cs;
> -	mxcs->base = spi_bases[bus];
>  	mxcs->ctrl_reg = ctrl_reg;
> +#endif
>  
>  	return &mxcs->slave;
>  }
> --
> 1.6.3.3
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 


More information about the U-Boot mailing list