[U-Boot] [PATCH 1/4] s5p6442: Support Samsung s5p6442 SoC

[Wolfgang Denk]

Dear Joonyoung Shim,

In message <4BB016DC.5000309 at samsung.com> you wrote:
> This patch adds support s5p6442 SoC. The s5p6442 SoC is ARM1176
> processor.
> 
> Cc: Minkyu Kang <mk7.kang at samsung.com>
> Cc: Kyungmin Park <kyungmin.park at samsung.com>
> Signed-off-by: Joonyoung Shim <jy0922.shim at samsung.com>
...
> +#define S5P6442_PWR_CFG			0xE010C000
...
> +#define S5P6442_EINT_WAKEUP_MASK	0xE010C004
> +#define S5P6442_WAKEUP_MASK		0xE010C008
> +#define S5P6442_PWR_MODE		0xE010C00C
> +#define S5P6442_PWR_MODE_SLEEP		(1 << 2)
> +#define S5P6442_NORMAL_CFG		0xE010C010
> +#define S5P6442_IDLE_CFG		0xE010C020
> +#define S5P6442_STOP_CFG		0xE010C030
> +#define S5P6442_STOP_MEM_CFG		0xE010C034
> +#define S5P6442_SLEEP_CFG		0xE010C040
> +#define S5P6442_OSC_FREQ		0xE010C100
> +#define S5P6442_OSC_STABLE		0xE010C104
> +#define S5P6442_PWR_STABLE		0xE010C108
> +#define S5P6442_MTC_STABLE		0xE010C110
> +#define S5P6442_CLAMP_STABLE		0xE010C114
> +#define S5P6442_WAKEUP_STAT		0xE010C200
> +#define S5P6442_OTHERS			0xE010E000
> +#define S5P6442_OTHERS_SYSCON_INT_DISABLE	(1 << 0)
> +#define S5P6442_MIE_CONTROL		0xE010E800
> +#define S5P6442_HDMI_CONTROL		0xE010E804
> +#define S5P6442_USB_PHY_CON		0xE010E80C
> +#define S5P6442_DAC_CONTROL		0xE010E810
> +#define S5P6442_MIPI_DPHY_CONTROL	0xE010E814
> +#define S5P6442_ADC_CONTROL		0xE010E818
> +#define S5P6442_PS_HOLD_CONTROL		0xE010E81C
> +#define S5P6442_PS_HOLD_DIR_OUTPUT	(1 << 9)
> +#define S5P6442_PS_HOLD_DIR_INPUT	(0 << 9)
> +#define S5P6442_PS_HOLD_DATA_HIGH	(1 << 8)
> +#define S5P6442_PS_HOLD_DATA_LOW	(0 << 8)
> +#define S5P6442_PS_HOLD_OUT_EN		(1 << 0)
> +#define S5P6442_INFORM0			0xE010F000
> +#define S5P6442_INFORM1			0xE010F004
> +#define S5P6442_INFORM2			0xE010F008
> +#define S5P6442_INFORM3			0xE010F00C
> +#define S5P6442_INFORM4			0xE010F010
> +#define S5P6442_INFORM5			0xE010F014
> +#define S5P6442_INFORM6			0xE010F018
> +#define S5P6442_INFORM7			0xE010F01C

Please use C structs to describe these registers.


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Hiring experienced unix people is  like  a  built-in  filter  against
idiots. Hiring experienced NT people provides no such guarantee.
            -- Miguel Cruz in WgL96.349$CC.122704 at typhoon2.ba-dsg.net