[U-Boot] [PATCH v2 07/17] SPEAr : Network driver support added
Tom Rix
tom at bumblecow.com
Tue May 4 15:14:51 CEST 2010
Vipin KUMAR wrote:
> On 5/3/2010 5:18 AM, Tom Rix wrote:
>> Vipin KUMAR wrote:
>>> Designware network driver support added.
>>> This is a Synopsys ethernet controller
>>>
>>> Signed-off-by: Vipin Kumar <vipin.kumar at st.com>
>>> ---
>>> drivers/net/Makefile | 1 +
>>> drivers/net/designware.c | 537
>>> ++++++++++++++++++++++++++++++++++++++++++++++
>>> drivers/net/designware.h | 264 +++++++++++++++++++++++
>>> include/netdev.h | 1 +
>>> 4 files changed, 803 insertions(+), 0 deletions(-)
>>> create mode 100644 drivers/net/designware.c
>>> create mode 100644 drivers/net/designware.h
>>>
>>> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
>>> index 1ec0ba1..82df908 100644
>>> --- a/drivers/net/Makefile
>>> +++ b/drivers/net/Makefile
>>> @@ -33,6 +33,7 @@ COBJS-$(CONFIG_BCM570x) += bcm570x.o
>>> bcm570x_autoneg.o 5701rls.o
>>> COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o
>>> COBJS-$(CONFIG_CS8900) += cs8900.o
>>> COBJS-$(CONFIG_TULIP) += dc2114x.o
>>> +COBJS-$(CONFIG_DESIGNWARE_ETH) += designware.o
>>> COBJS-$(CONFIG_DRIVER_DM9000) += dm9000x.o
>>> COBJS-$(CONFIG_DNET) += dnet.o
>>> COBJS-$(CONFIG_E1000) += e1000.o
>>> diff --git a/drivers/net/designware.c b/drivers/net/designware.c
>>> new file mode 100644
>>> index 0000000..9361f77
>>> --- /dev/null
>>> +++ b/drivers/net/designware.c
>>> @@ -0,0 +1,537 @@
>>> +/*
>>> + * (C) Copyright 2009
>>> + * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
>>> + *
>>> + * (C) Copyright 2008
>>> + * Deepak Sikri, ST Micoelectronics, deepak.sikri at st.com.
>>> + *
>>> + * See file CREDITS for list of people who contributed to this
>>> + * project.
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of
>>> + * the License, or (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License
>>> + * along with this program; if not, write to the Free Software
>>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>>> + * MA 02111-1307 USA
>>> + */
>>> +
>>> +/*
>>> + * Designware ethernet IP driver for u-boot
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <miiphy.h>
>>> +#include <malloc.h>
>>> +#include <linux/err.h>
>>> +#include <asm/io.h>
>>> +#include "designware.h"
>>> +
>>> +static void tx_descs_init(struct eth_device *dev)
>>> +{
>>> + struct dw_eth_dev *priv = dev->priv;
>>> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
>>> + struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0];
>>> + char *txbuffs = &priv->txbuffs[0];
>>> + struct dmamacdescr *desc_p;
>>> + u32 idx;
>>> +
>>> + for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) {
>>> + desc_p = &desc_table_p[idx];
>>> + desc_p->dmamac_addr = &txbuffs[idx * CONFIG_ETH_BUFSIZE];
>>> + desc_p->dmamac_next = &desc_table_p[idx + 1];
>>> +
>>> +#if defined(CONFIG_DW_ALTDESCRIPTOR)
>> Add a comment describing CONFIG_DW_ALTDESCRIPTOR
>> The README.spear would be an excellent place to put this
>> and the other new CONFIG_ *
>>
>> Update the README.spear to be current with the
>> new spear1300 target and the other new information
>> you want to share.
>
> OK. I would add a comment here. Since this is implemented as generic
> designware network peripheral and it can be reused, README.spear
> doesn't look like a good place to describe the various configurations
> that are supported by the driver
Ok
>
> Should I create a new doc/README.designware_eth to describe the
> supported peripheral configurations ?
>
More, useful documentation is always better.
This name is fine with me, but it is Ben's call.
Documentented CONFIG_DW or CONFIG_DESIGNWARE would
make the now dead #if-def's useful enough to keep.
>>> + desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
>>> + DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
>>> + DESC_TXSTS_TXCHECKINSCTRL | \
>>> + DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
>>> +
>>> + desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
>>> + desc_p->dmamac_cntl = 0;
>>> + desc_p->txrx_status &= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA);
>>> +#else
>>> + desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN;
>>> + desc_p->txrx_status = 0;
>>> +#endif
>>> + }
>>> +
>>> + /* Correcting the last pointer of the chain */
>>> + desc_p->dmamac_next = &desc_table_p[0];
>>> +
>>> + writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr);
>>> +}
>>> +
>>> +static void rx_descs_init(struct eth_device *dev)
>>> +{
>>> + struct dw_eth_dev *priv = dev->priv;
>>> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
>>> + struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0];
>>> + char *rxbuffs = &priv->rxbuffs[0];
>>> + struct dmamacdescr *desc_p;
>>> + u32 idx;
>>> +
>>> + for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) {
>>> + desc_p = &desc_table_p[idx];
>>> + desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE];
>>> + desc_p->dmamac_next = &desc_table_p[idx + 1];
>>> +
>>> + desc_p->dmamac_cntl =
>>> + (MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \
>>> + DESC_RXCTRL_RXCHAIN;
>>> +
>>> + desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
>>> + }
>>> +
>>> + /* Correcting the last pointer of the chain */
>>> + desc_p->dmamac_next = &desc_table_p[0];
>>> +
>>> + writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr);
>>> +}
>>> +
>>> +static void descs_init(struct eth_device *dev)
>>> +{
>>> + tx_descs_init(dev);
>>> + rx_descs_init(dev);
>>> +}
>>> +
>>> +static int mac_reset(struct eth_device *dev)
>>> +{
>>> + struct dw_eth_dev *priv = dev->priv;
>>> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
>>> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
>>> +
>>> + int timeout = CONFIG_MACRESET_TIMEOUT;
>>> +
>>> + writel(DMAMAC_SRST, &dma_p->busmode);
>>> + writel(MII_PORTSELECT, &mac_p->conf);
>>> +
>>> + do {
>>> + if (!(readl(&dma_p->busmode) & DMAMAC_SRST))
>>> + break;
>>> + udelay(1000);
>>> + } while (timeout--);
>>> +
>>> + if (timeout < 0)
>>> + return -1;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static void program_mac(struct eth_device *dev)
>>> +{
>>> + struct dw_eth_dev *priv = dev->priv;
>>> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
>>> + u32 macid_lo, macid_hi;
>>> + u8 *mac_id = &dev->enetaddr[0];
>>> +
>>> + macid_lo = mac_id[0] + (mac_id[1] << 8) + \
>>> + (mac_id[2] << 16) + (mac_id[3] << 24);
>>> + macid_hi = mac_id[4] + (mac_id[5] << 8);
>>> +
>>> + writel(macid_hi, &mac_p->macaddr0hi);
>>> + writel(macid_lo, &mac_p->macaddr0lo);
>>> +}
>>> +
>>> +static int dw_eth_init(struct eth_device *dev, bd_t *bis)
>>> +{
>>> + struct dw_eth_dev *priv = dev->priv;
>>> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
>>> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
>>> + u32 conf;
>>> +
>>> + /* Reset ethernet hardware */
>>> + if (mac_reset(dev) < 0)
>>> + return -1;
>>> +
>>> + program_mac(dev);
>>> +
>>> + writel(FIXEDBURST | PRIORXTX_41 | BURST_16,
>>> + &dma_p->busmode);
>>> +
>>> + writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode);
>>> + writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode);
>>> +
>>> + conf = FRAMEBURSTENABLE | DISABLERXOWN;
>>> +
>>> + if (priv->speed != SPEED_1000M)
>>> + conf |= MII_PORTSELECT;
>>> +
>>> + if (priv->duplex == FULL_DUPLEX)
>>> + conf |= FULLDPLXMODE;
>>> +
>>> + writel(conf, &mac_p->conf);
>>> +
>>> + descs_init(dev);
>>> +
>>> + /*
>>> + * Start/Enable xfer at dma as well as mac level
>>> + */
>>> + writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode);
>>> + writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode);
>>> +
>>> + writel(readl(&mac_p->conf) | RXENABLE, &mac_p->conf);
>>> + writel(readl(&mac_p->conf) | TXENABLE, &mac_p->conf);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int dw_eth_send(struct eth_device *dev, volatile void *packet,
>>> + int length)
>>> +{
>>> + struct dw_eth_dev *priv = dev->priv;
>>> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
>>> + u32 desc_num = priv->tx_currdescnum;
>>> + struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
>>> +
>>> + /* Check if the descriptor is owned by CPU */
>>> + if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) {
>>> + printf("CPU not owner of tx frame\n");
>>> + return -1;
>>> + }
>>> +
>>> + memcpy((void *)desc_p->dmamac_addr, (void *)packet, length);
>>> +
>>> +#if defined(CONFIG_DW_ALTDESCRIPTOR)
>>> + desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
>>> + desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \
>>> + DESC_TXCTRL_SIZE1MASK;
>>> +
>>> + desc_p->txrx_status &= ~(DESC_TXSTS_MSK);
>>> + desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
>>> +#else
>>> + desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \
>>> + DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
>>> + DESC_TXCTRL_TXFIRST;
>>> +
>>> + desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
>>> +#endif
>>> +
>>> + /* Test the wrap-around condition. */
>>> + if (++desc_num >= CONFIG_TX_DESCR_NUM)
>>> + desc_num = 0;
>>> +
>>> + priv->tx_currdescnum = desc_num;
>>> +
>>> + /* Start the transmission */
>>> + writel(POLL_DATA, &dma_p->txpolldemand);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int dw_eth_recv(struct eth_device *dev)
>>> +{
>>> + struct dw_eth_dev *priv = dev->priv;
>>> + u32 desc_num = priv->rx_currdescnum;
>>> + struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num];
>>> +
>>> + u32 status = desc_p->txrx_status;
>>> + int length = 0;
>>> +
>>> + /* Check if the owner is the CPU */
>>> + if (!(status & DESC_RXSTS_OWNBYDMA)) {
>>> +
>>> + length = (status & DESC_RXSTS_FRMLENMSK) >> \
>>> + DESC_RXSTS_FRMLENSHFT;
>>> +
>>> + NetReceive(desc_p->dmamac_addr, length);
>>> +
>>> + /*
>>> + * Make the current descriptor valid again and go to
>>> + * the next one
>>> + */
>>> + desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA;
>>> +
>>> + /* Test the wrap-around condition. */
>>> + if (++desc_num >= CONFIG_RX_DESCR_NUM)
>>> + desc_num = 0;
>>> + }
>>> +
>>> + priv->rx_currdescnum = desc_num;
>>> +
>>> + return length;
>>> +}
>>> +
>>> +static void dw_eth_halt(struct eth_device *dev)
>>> +{
>>> + struct dw_eth_dev *priv = dev->priv;
>>> +
>>> + mac_reset(dev);
>>> + priv->tx_currdescnum = priv->rx_currdescnum = 0;
>>> +}
>>> +
>>> +static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16
>>> *val)
>>> +{
>>> + struct dw_eth_dev *priv = dev->priv;
>>> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
>>> + u32 miiaddr;
>>> + int timeout = CONFIG_MDIO_TIMEOUT;
>>> +
>>> + miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
>>> + ((reg << MIIREGSHIFT) & MII_REGMSK);
>>> +
>>> + writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
>>> +
>>> + do {
>>> + if (!(readl(&mac_p->miiaddr) & MII_BUSY))
>>> + break;
>>> + udelay(1000);
>>> + } while (timeout--);
>>> +
>>> + *val = readl(&mac_p->miidata);
>>> +
>>> + if (timeout < 0)
>>> + return -1;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg,
>>> u16 val)
>>> +{
>>> + struct dw_eth_dev *priv = dev->priv;
>>> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
>>> + u32 miiaddr;
>>> + int timeout = CONFIG_MDIO_TIMEOUT;
>>> + u16 value;
>>> +
>>> + writel(val, &mac_p->miidata);
>>> + miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
>>> + ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE;
>>> +
>>> + writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
>>> +
>>> + do {
>>> + if (!(readl(&mac_p->miiaddr) & MII_BUSY))
>>> + break;
>>> + udelay(1000);
>>> + } while (timeout--);
>>> +
>>> + /* Needed as a fix for ST-Phy */
>>> + eth_mdio_read(dev, addr, reg, &value);
>>> +
>>> + if (timeout < 0)
>>> + return -1;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int find_phy(struct eth_device *dev)
>>> +{
>>> + int phy_addr = 0;
>>> + u16 ctrl, oldctrl;
>>> +
>>> + do {
>>> + eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
>>> + oldctrl = ctrl & PHY_BMCR_AUTON;
>>> +
>>> + ctrl ^= PHY_BMCR_AUTON;
>>> + eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
>>> + eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
>>> + ctrl &= PHY_BMCR_AUTON;
>>> +
>>> + if (ctrl == oldctrl) {
>>> + phy_addr++;
>>> + } else {
>>> + ctrl ^= PHY_BMCR_AUTON;
>>> + eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
>>> +
>>> + return phy_addr;
>>> + }
>>> + } while (phy_addr < 32);
>>> +
>>> + return -1;
>>> +}
>>> +
>>> +static int dw_reset_phy(struct eth_device *dev)
>>> +{
>>> + struct dw_eth_dev *priv = dev->priv;
>>> + u16 ctrl;
>>> + int timeout = CONFIG_PHYRESET_TIMEOUT;
>>> + u32 phy_addr = priv->address;
>>> +
>>> + eth_mdio_write(dev, phy_addr, PHY_BMCR, PHY_BMCR_RESET);
>>> + do {
>>> + eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
>>> + if (!(ctrl & PHY_BMCR_RESET))
>>> + break;
>>> + udelay(1000);
>>> + } while (timeout--);
>>> +
>>> + if (timeout < 0)
>>> + return -1;
>>> +
>>> +#ifdef CONFIG_PHY_RESET_DELAY
>>> + udelay(CONFIG_PHY_RESET_DELAY);
>>> +#endif
>>> + return 0;
>>> +}
>>> +
>>> +static int configure_phy(struct eth_device *dev)
>>> +{
>>> + struct dw_eth_dev *priv = dev->priv;
>>> + int phy_addr;
>>> + u16 bmcr, ctrl;
>>> +#if defined(CONFIG_DW_AUTONEG)
>>> + u16 bmsr;
>>> + u32 timeout;
>>> + u16 anlpar, btsr;
>> CONFIG_DW_AUTONEG is never defined.
>> This is dead code
>> Remove all instances
>
> The idea is that this is a generic driver which supports Autonegotiation
> by enabling this #define in include/configs/xxx.h
>
Add a description to the README.designware_eth
So others will be able to use it.
>>> +#endif
>>> + phy_addr = find_phy(dev);
>>> + priv->address = phy_addr;
>>> +
>>> + if (phy_addr < 0)
>>> + return -1;
>>> +
>>> + if (dw_reset_phy(dev) < 0)
>>> + return -1;
>>> +
>>> +#if defined(CONFIG_DW_AUTONEG)
>>> + bmcr = PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_100MB | \
>>> + PHY_BMCR_DPLX | PHY_BMCR_1000_MBPS;
>>> +#else
>>> + bmcr = PHY_BMCR_100MB | PHY_BMCR_DPLX;
>>> +
>>> +#if defined(CONFIG_DW_SPEED10M)
>>> + bmcr &= ~PHY_BMCR_100MB;
>> CONFIG_DW_SPEED10M is never defined
>> This is dead code
>> Remove
>
> Again, the driver supports 10Mbps. Its upto the board configuration to
> use it
>
Another add to readme.
>>> +#endif
>>> +#if defined(CONFIG_DW_DUPLEXHALF)
>> CONFIG_DW_DUPLEXHALF is never defined
>> Remove
>
> Same explanation as above
ditto :)
>
>>> + bmcr &= ~PHY_BMCR_DPLX;
>>> +#endif
>>> +#endif
>>> + if (eth_mdio_write(dev, phy_addr, PHY_BMCR, bmcr) < 0)
>>> + return -1;
>>> +
>>> + /* Read the phy status register and populate priv structure */
>>> +#if defined(CONFIG_DW_AUTONEG)
>>> + timeout = CONFIG_AUTONEG_TIMEOUT;
>>> + do {
>>> + eth_mdio_read(dev, phy_addr, PHY_BMSR, &bmsr);
>>> + if (bmsr & PHY_BMSR_AUTN_COMP)
>>> + break;
>>> + udelay(1000);
>>> + } while (timeout--);
>>> +
>>> + eth_mdio_read(dev, phy_addr, PHY_ANLPAR, &anlpar);
>>> + eth_mdio_read(dev, phy_addr, PHY_1000BTSR, &btsr);
>>> +
>>> + if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
>>> + priv->speed = SPEED_1000M;
>>> + if (btsr & PHY_1000BTSR_1000FD)
>>> + priv->duplex = FULL_DUPLEX;
>>> + else
>>> + priv->duplex = HALF_DUPLEX;
>>> + } else {
>>> + if (anlpar & PHY_ANLPAR_100)
>>> + priv->speed = SPEED_100M;
>>> + else
>>> + priv->speed = SPEED_10M;
>>> +
>>> + if (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
>>> + priv->duplex = FULL_DUPLEX;
>>> + else
>>> + priv->duplex = HALF_DUPLEX;
>>> + }
>>> +#else
>>> + if (eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl) < 0)
>>> + return -1;
>>> +
>>> + if (ctrl & PHY_BMCR_DPLX)
>>> + priv->duplex = FULL_DUPLEX;
>>> + else
>>> + priv->duplex = HALF_DUPLEX;
>>> +
>>> + if (ctrl & PHY_BMCR_1000_MBPS)
>>> + priv->speed = SPEED_1000M;
>>> + else if (ctrl & PHY_BMCR_100_MBPS)
>>> + priv->speed = SPEED_100M;
>>> + else
>>> + priv->speed = SPEED_10M;
>>> +#endif
>>> + return 0;
>>> +}
>>> +
>>> +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
>> Checking for both CONFIG_MII and CONFIG_CMD_MII
>> is standard practice. But shouldn't CONFIG_MII be enough?
>>
> Yes, I also thought about this for a little while.
> I think this is because CONFIG_CMD_MII can be defined independently
>
Whould the mii command still be expected to work if there was
not hw support ? It would seem like CONFIG_CMD_MII should be
dependent on CONFIG_MII.
>>> +static int dw_mii_read(char *devname, u8 addr, u8 reg, u16 *val)
>>> +{
>>> + struct eth_device *dev;
>>> +
>>> + dev = eth_get_dev_by_name(devname);
>>> + if (dev)
>>> + eth_mdio_read(dev, addr, reg, val);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int dw_mii_write(char *devname, u8 addr, u8 reg, u16 val)
>>> +{
>>> + struct eth_device *dev;
>>> +
>>> + dev = eth_get_dev_by_name(devname);
>>> + if (dev)
>>> + eth_mdio_write(dev, addr, reg, val);
>>> +
>>> + return 0;
>>> +}
>>> +#endif
>>> +
>>> +int designware_initialize(u32 id, ulong base_addr)
>>> +{
>>> + struct eth_device *dev;
>>> + struct dw_eth_dev *priv;
>>> +
>>> + dev = (struct eth_device *) malloc(sizeof(struct eth_device));
>>> + if (!dev)
>>> + return -ENOMEM;
>>> +
>>> + /*
>>> + * Since the priv structure contains the descriptors which need a
>>> strict
>>> + * buswidth alignment, memalign is used to allocate memory
>>> + */
>>> + priv = (struct dw_eth_dev *) memalign(16, sizeof(struct
>>> dw_eth_dev));
>>> + if (!priv) {
>>> + free(dev);
>>> + return -ENOMEM;
>>> + }
>>> +
>>> + memset(dev, 0, sizeof(struct eth_device));
>>> + memset(priv, 0, sizeof(struct dw_eth_dev));
>>> +
>>> + sprintf(dev->name, "mii%d", id);
>>> + dev->iobase = (int)base_addr;
>>> + dev->priv = priv;
>>> +
>>> + eth_getenv_enetaddr_by_index(id, &dev->enetaddr[0]);
>>> +
>>> + priv->dev = dev;
>>> + priv->mac_regs_p = (struct eth_mac_regs *)base_addr;
>>> + priv->dma_regs_p = (struct eth_dma_regs *)(base_addr +
>>> + DW_DMA_BASE_OFFSET);
>>> +
>>> + if (mac_reset(dev) < 0)
>>> + return -1;
>>> +
>>> + if (configure_phy(dev) < 0) {
>>> + printf("Phy could not be configured\n");
>>> + return -1;
>>> + }
>>> +
>>> + dev->init = dw_eth_init;
>>> + dev->send = dw_eth_send;
>>> + dev->recv = dw_eth_recv;
>>> + dev->halt = dw_eth_halt;
>>> +
>>> + eth_register(dev);
>>> +
>>> +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
>>> + miiphy_register(dev->name, dw_mii_read, dw_mii_write);
>>> +#endif
>>> + return 1;
>>> +}
>>> diff --git a/drivers/net/designware.h b/drivers/net/designware.h
>>> new file mode 100644
>>> index 0000000..8f7e1ef
>>> --- /dev/null
>>> +++ b/drivers/net/designware.h
>>> @@ -0,0 +1,264 @@
>>> +/*
>>> + * (C) Copyright 2009
>>> + * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
>>> + *
>>> + * See file CREDITS for list of people who contributed to this
>>> + * project.
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of
>>> + * the License, or (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License
>>> + * along with this program; if not, write to the Free Software
>>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>>> + * MA 02111-1307 USA
>>> + */
>>> +
>>> +#ifndef _DW_ETH_H
>>> +#define _DW_ETH_H
>>> +
>>> +#define CONFIG_TX_DESCR_NUM 16
>>> +#define CONFIG_RX_DESCR_NUM 16
>>> +#define CONFIG_ETH_BUFSIZE 2048
>>> +#define TX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM)
>>> +#define RX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM)
>>> +
>>> +#define CONFIG_MACRESET_TIMEOUT (3 * CONFIG_SYS_HZ)
>>> +#define CONFIG_MDIO_TIMEOUT (3 * CONFIG_SYS_HZ)
>>> +#define CONFIG_PHYRESET_TIMEOUT (3 * CONFIG_SYS_HZ)
>>> +#define CONFIG_AUTONEG_TIMEOUT (5 * CONFIG_SYS_HZ)
>>> +
>>> +struct eth_mac_regs {
>>> + u32 conf; /* 0x00 */
>>> + u32 framefilt; /* 0x04 */
>>> + u32 hashtablehigh; /* 0x08 */
>>> + u32 hashtablelow; /* 0x0c */
>>> + u32 miiaddr; /* 0x10 */
>>> + u32 miidata; /* 0x14 */
>>> + u32 flowcontrol; /* 0x18 */
>>> + u32 vlantag; /* 0x1c */
>>> + u32 version; /* 0x20 */
>>> + u8 reserved_1[0x38 - 0x24];
>> This hex subtraction could be simplified.
>> Just the single immediate would be easier to read.
>>
> This hex subtraction need not be performed. Actually, this is simply the
> next register offset - current register offset + 4
> This way manual additions are not needed and the reserved area in device
> registers can be depicted easily. Do you still want me to do it the
> other way ?
This hex substraction is used in many places. So a general solution is
needed. I would prefer to just see
u8 reaserved_XX[n]
where n = 4,8,.. some immediate.
Tom
>
> Regards
> Vipin
>
>> Tom
>>
>>> + u32 intreg; /* 0x38 */
>>> + u32 intmask; /* 0x3c */
>>> + u32 macaddr0hi; /* 0x40 */
>>> + u32 macaddr0lo; /* 0x44 */
>>> +};
>>> +
>>> +/* MAC configuration register definitions */
>>> +#define FRAMEBURSTENABLE (1 << 21)
>>> +#define MII_PORTSELECT (1 << 15)
>>> +#define FES_100 (1 << 14)
>>> +#define DISABLERXOWN (1 << 13)
>>> +#define FULLDPLXMODE (1 << 11)
>>> +#define RXENABLE (1 << 2)
>>> +#define TXENABLE (1 << 3)
>>> +
>>> +/* MII address register definitions */
>>> +#define MII_BUSY (1 << 0)
>>> +#define MII_WRITE (1 << 1)
>>> +#define MII_CLKRANGE_60_100M (0)
>>> +#define MII_CLKRANGE_100_150M (0x4)
>>> +#define MII_CLKRANGE_20_35M (0x8)
>>> +#define MII_CLKRANGE_35_60M (0xC)
>>> +#define MII_CLKRANGE_150_250M (0x10)
>>> +#define MII_CLKRANGE_250_300M (0x14)
>>> +
>>> +#define MIIADDRSHIFT (11)
>>> +#define MIIREGSHIFT (6)
>>> +#define MII_REGMSK (0x1F << 6)
>>> +#define MII_ADDRMSK (0x1F << 11)
>>> +
>>> +
>>> +struct eth_dma_regs {
>>> + u32 busmode; /* 0x00 */
>>> + u32 txpolldemand; /* 0x04 */
>>> + u32 rxpolldemand; /* 0x08 */
>>> + u32 rxdesclistaddr; /* 0x0c */
>>> + u32 txdesclistaddr; /* 0x10 */
>>> + u32 status; /* 0x14 */
>>> + u32 opmode; /* 0x18 */
>>> + u32 intenable; /* 0x1c */
>>> + u8 reserved[0x48 - 0x20];
>>> + u32 currhosttxdesc; /* 0x48 */
>>> + u32 currhostrxdesc; /* 0x4c */
>>> + u32 currhosttxbuffaddr; /* 0x50 */
>>> + u32 currhostrxbuffaddr; /* 0x54 */
>>> +};
>>> +
>>> +#define DW_DMA_BASE_OFFSET (0x1000)
>>> +
>>> +/* Bus mode register definitions */
>>> +#define FIXEDBURST (1 << 16)
>>> +#define PRIORXTX_41 (3 << 14)
>>> +#define PRIORXTX_31 (2 << 14)
>>> +#define PRIORXTX_21 (1 << 14)
>>> +#define PRIORXTX_11 (0 << 14)
>>> +#define BURST_1 (1 << 8)
>>> +#define BURST_2 (2 << 8)
>>> +#define BURST_4 (4 << 8)
>>> +#define BURST_8 (8 << 8)
>>> +#define BURST_16 (16 << 8)
>>> +#define BURST_32 (32 << 8)
>>> +#define RXHIGHPRIO (1 << 1)
>>> +#define DMAMAC_SRST (1 << 0)
>>> +
>>> +/* Poll demand definitions */
>>> +#define POLL_DATA (0xFFFFFFFF)
>>> +
>>> +/* Operation mode definitions */
>>> +#define STOREFORWARD (1 << 21)
>>> +#define FLUSHTXFIFO (1 << 20)
>>> +#define TXSTART (1 << 13)
>>> +#define TXSECONDFRAME (1 << 2)
>>> +#define RXSTART (1 << 1)
>>> +
>>> +/* Descriptior related definitions */
>>> +#define MAC_MAX_FRAME_SZ (2048)
>>> +
>>> +struct dmamacdescr {
>>> + u32 txrx_status;
>>> + u32 dmamac_cntl;
>>> + void *dmamac_addr;
>>> + struct dmamacdescr *dmamac_next;
>>> +};
>>> +
>>> +/*
>>> + * txrx_status definitions
>>> + */
>>> +
>>> +/* tx status bits definitions */
>>> +#if defined(CONFIG_DW_ALTDESCRIPTOR)
>>> +
>>> +#define DESC_TXSTS_OWNBYDMA (1 << 31)
>>> +#define DESC_TXSTS_TXINT (1 << 30)
>>> +#define DESC_TXSTS_TXLAST (1 << 29)
>>> +#define DESC_TXSTS_TXFIRST (1 << 28)
>>> +#define DESC_TXSTS_TXCRCDIS (1 << 27)
>>> +
>>> +#define DESC_TXSTS_TXPADDIS (1 << 26)
>>> +#define DESC_TXSTS_TXCHECKINSCTRL (3 << 22)
>>> +#define DESC_TXSTS_TXRINGEND (1 << 21)
>>> +#define DESC_TXSTS_TXCHAIN (1 << 20)
>>> +#define DESC_TXSTS_MSK (0x1FFFF << 0)
>>> +
>>> +#else
>>> +
>>> +#define DESC_TXSTS_OWNBYDMA (1 << 31)
>>> +#define DESC_TXSTS_MSK (0x1FFFF << 0)
>>> +
>>> +#endif
>>> +
>>> +/* rx status bits definitions */
>>> +#define DESC_RXSTS_OWNBYDMA (1 << 31)
>>> +#define DESC_RXSTS_DAFILTERFAIL (1 << 30)
>>> +#define DESC_RXSTS_FRMLENMSK (0x3FFF << 16)
>>> +#define DESC_RXSTS_FRMLENSHFT (16)
>>> +
>>> +#define DESC_RXSTS_ERROR (1 << 15)
>>> +#define DESC_RXSTS_RXTRUNCATED (1 << 14)
>>> +#define DESC_RXSTS_SAFILTERFAIL (1 << 13)
>>> +#define DESC_RXSTS_RXIPC_GIANTFRAME (1 << 12)
>>> +#define DESC_RXSTS_RXDAMAGED (1 << 11)
>>> +#define DESC_RXSTS_RXVLANTAG (1 << 10)
>>> +#define DESC_RXSTS_RXFIRST (1 << 9)
>>> +#define DESC_RXSTS_RXLAST (1 << 8)
>>> +#define DESC_RXSTS_RXIPC_GIANT (1 << 7)
>>> +#define DESC_RXSTS_RXCOLLISION (1 << 6)
>>> +#define DESC_RXSTS_RXFRAMEETHER (1 << 5)
>>> +#define DESC_RXSTS_RXWATCHDOG (1 << 4)
>>> +#define DESC_RXSTS_RXMIIERROR (1 << 3)
>>> +#define DESC_RXSTS_RXDRIBBLING (1 << 2)
>>> +#define DESC_RXSTS_RXCRC (1 << 1)
>>> +
>>> +/*
>>> + * dmamac_cntl definitions
>>> + */
>>> +
>>> +/* tx control bits definitions */
>>> +#if defined(CONFIG_DW_ALTDESCRIPTOR)
>>> +
>>> +#define DESC_TXCTRL_SIZE1MASK (0x1FFF << 0)
>>> +#define DESC_TXCTRL_SIZE1SHFT (0)
>>> +#define DESC_TXCTRL_SIZE2MASK (0x1FFF << 16)
>>> +#define DESC_TXCTRL_SIZE2SHFT (16)
>>> +
>>> +#else
>>> +
>>> +#define DESC_TXCTRL_TXINT (1 << 31)
>>> +#define DESC_TXCTRL_TXLAST (1 << 30)
>>> +#define DESC_TXCTRL_TXFIRST (1 << 29)
>>> +#define DESC_TXCTRL_TXCHECKINSCTRL (3 << 27)
>>> +#define DESC_TXCTRL_TXCRCDIS (1 << 26)
>>> +#define DESC_TXCTRL_TXRINGEND (1 << 25)
>>> +#define DESC_TXCTRL_TXCHAIN (1 << 24)
>>> +
>>> +#define DESC_TXCTRL_SIZE1MASK (0x7FF << 0)
>>> +#define DESC_TXCTRL_SIZE1SHFT (0)
>>> +#define DESC_TXCTRL_SIZE2MASK (0x7FF << 11)
>>> +#define DESC_TXCTRL_SIZE2SHFT (11)
>>> +
>>> +#endif
>>> +
>>> +/* rx control bits definitions */
>>> +#if defined(CONFIG_DW_ALTDESCRIPTOR)
>>> +
>>> +#define DESC_RXCTRL_RXINTDIS (1 << 31)
>>> +#define DESC_RXCTRL_RXRINGEND (1 << 15)
>>> +#define DESC_RXCTRL_RXCHAIN (1 << 14)
>>> +
>>> +#define DESC_RXCTRL_SIZE1MASK (0x1FFF << 0)
>>> +#define DESC_RXCTRL_SIZE1SHFT (0)
>>> +#define DESC_RXCTRL_SIZE2MASK (0x1FFF << 16)
>>> +#define DESC_RXCTRL_SIZE2SHFT (16)
>>> +
>>> +#else
>>> +
>>> +#define DESC_RXCTRL_RXINTDIS (1 << 31)
>>> +#define DESC_RXCTRL_RXRINGEND (1 << 25)
>>> +#define DESC_RXCTRL_RXCHAIN (1 << 24)
>>> +
>>> +#define DESC_RXCTRL_SIZE1MASK (0x7FF << 0)
>>> +#define DESC_RXCTRL_SIZE1SHFT (0)
>>> +#define DESC_RXCTRL_SIZE2MASK (0x7FF << 11)
>>> +#define DESC_RXCTRL_SIZE2SHFT (11)
>>> +
>>> +#endif
>>> +
>>> +struct dw_eth_dev {
>>> + u32 address;
>>> + u32 speed;
>>> + u32 duplex;
>>> + u32 tx_currdescnum;
>>> + u32 rx_currdescnum;
>>> + u32 padding;
>>> +
>>> + struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM];
>>> + struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM];
>>> +
>>> + char txbuffs[TX_TOTAL_BUFSIZE];
>>> + char rxbuffs[RX_TOTAL_BUFSIZE];
>>> +
>>> + struct eth_mac_regs *mac_regs_p;
>>> + struct eth_dma_regs *dma_regs_p;
>>> +
>>> + struct eth_device *dev;
>>> +} __attribute__ ((aligned(8)));
>>> +
>>> +/* Speed specific definitions */
>>> +#define SPEED_10M 1
>>> +#define SPEED_100M 2
>>> +#define SPEED_1000M 3
>>> +
>>> +/* Duplex mode specific definitions */
>>> +#define HALF_DUPLEX 1
>>> +#define FULL_DUPLEX 2
>>> +
>>> +#endif
>>> diff --git a/include/netdev.h b/include/netdev.h
>>> index 1dd80f0..808fdde 100644
>>> --- a/include/netdev.h
>>> +++ b/include/netdev.h
>>> @@ -47,6 +47,7 @@ int bfin_EMAC_initialize(bd_t *bis);
>>> int cs8900_initialize(u8 dev_num, int base_addr);
>>> int dc21x4x_initialize(bd_t *bis);
>>> int davinci_emac_initialize(void);
>>> +int designware_initialize(u32 id, ulong base_addr);
>>> int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
>>> int e1000_initialize(bd_t *bis);
>>> int eepro100_initialize(bd_t *bis);
>>
>
>
>
More information about the U-Boot
mailing list