[U-Boot] [PATCH 3/3] TI: DaVinci: Create configuration file for da850 EVM

Wolfgang Denk wd at denx.de
Fri May 7 00:06:49 CEST 2010


Dear Sudhakar Rajashekhara,

In message <1272445230-427-1-git-send-email-sudhakar.raj at ti.com> you wrote:
> Provides initial support for TI OMAP-L138/DA850 SoC devices
> on a Logic PD EVM board.
> 
> Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj at ti.com>
> ---
>  MAINTAINERS                |    4 +
>  MAKEALL                    |    1 +
>  Makefile                   |    3 +
>  include/configs/da850evm.h |  135 ++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 143 insertions(+), 0 deletions(-)
>  create mode 100644 include/configs/da850evm.h

Patches 2 and 3 should be merged into one, please.

> diff --git a/MAINTAINERS b/MAINTAINERS
> index a5d5835..c52803d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -758,6 +758,10 @@ Nick Thompson <nick.thompson at gefanuc.com>
>  
>  	da830evm	ARM926EJS (DA830/OMAP-L137)
>  
> +Sudhakar Rajashekhara <sudhakar.raj at ti.com>
> +
> +	da850evm	ARM926EJS (DA850/OMAP-L138)
> +
>  Albin Tonnerre <albin.tonnerre at free-electrons.com>

Please keep list sorted.

> diff --git a/Makefile b/Makefile
> index 393b180..0f21db6 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -2913,6 +2913,9 @@ cp922_XA10_config	\
>  cp1026_config: unconfig
>  	@board/armltd/integrator/split_by_variant.sh cp $@
>  
> +da850evm_config:	unconfig
> +	@$(MKCONFIG) $(@:_config=) arm arm926ejs da8xxevm davinci davinci
> +
>  da830evm_config:	unconfig
>  	@$(MKCONFIG) $(@:_config=) arm arm926ejs da8xxevm davinci davinci

Please keep list sorted, and use just a single entry, i. e.:

	da830evm_config	\
	da850evm_config:	unconfig
		@$(MKCONFIG) $(@:_config=) arm arm926ejs da8xxevm davinci davinci

> diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
> new file mode 100644
> index 0000000..2fcc76d
> --- /dev/null
> +++ b/include/configs/da850evm.h
...
> +/*
> + * Memory Info
> + */
> +#define CONFIG_SYS_MALLOC_LEN	(0x10000 + 1*1024*1024) /* malloc() len */
> +#define CONFIG_SYS_GBL_DATA_SIZE	128 /* reserved for initial data */
> +#define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
> +#define PHYS_SDRAM_1_SIZE	(64 << 20) /* SDRAM size 64MB */
> +#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1 + 0x2000000 /* memtest start addr */
> +#define CONFIG_SYS_MEMTEST_END 	(PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) /* 16MB test */

Line too long.


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The reasonable man adapts himself to the world; the unreasonable  one
persists  in  trying  to  adapt  the  world to himself. Therefore all
progress depends on the unreasonable man."      - George Bernard Shaw


More information about the U-Boot mailing list