[U-Boot] [PATCH v3] Move ICS CLK chip frequenty calculation code into a common board library
Kumar Gala
galak at kernel.crashing.org
Mon May 24 22:09:26 CEST 2010
We have several boards that use the same ICS307 CLK chip to drive the
System clock and DDR clock. Move the code into a common location so we
share it.
Convert the P2020DS board as the first to use the new common ICS307
code.
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
* unsigned char -> u8
* remove 1 +
board/freescale/common/Makefile | 1 +
board/freescale/common/ics307_clk.c | 88 ++++++++++++++++++++
board/freescale/common/ics307_clk.h | 30 +++++++
board/freescale/p2020ds/p2020ds.c | 149 -----------------------------------
include/configs/P2020DS.h | 16 +---
5 files changed, 124 insertions(+), 160 deletions(-)
create mode 100644 board/freescale/common/ics307_clk.c
create mode 100644 board/freescale/common/ics307_clk.h
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index df289aa..d18445b 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -42,6 +42,7 @@ COBJS-$(CONFIG_MPC8541CDS) += cds_pci_ft.o
COBJS-$(CONFIG_MPC8548CDS) += cds_pci_ft.o
COBJS-$(CONFIG_MPC8555CDS) += cds_pci_ft.o
+COBJS-$(CONFIG_P2020DS) += ics307_clk.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c
new file mode 100644
index 0000000..89d8810
--- /dev/null
+++ b/board/freescale/common/ics307_clk.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#include "ics307_clk.h"
+
+#ifdef CONFIG_FSL_NGPIXIS
+#include "ngpixis.h"
+#else
+#include "pixis.h"
+#endif
+
+/* decode S[0-2] to Output Divider (OD) */
+static u8 ics307_s_to_od[] = {
+ 10, 2, 8, 4, 5, 7, 3, 6
+};
+
+/*
+ * Calculate frequency being generated by ICS307-02 clock chip based upon
+ * the control bytes being programmed into it.
+ */
+static unsigned long ics307_clk_freq(u8 cw0, u8 cw1, u8 cw2)
+{
+ const unsigned long input_freq = CONFIG_ICS307_REFCLK_HZ;
+ unsigned long vdw = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
+ unsigned long rdw = cw2 & 0x7F;
+ unsigned long od = ics307_s_to_od[cw0 & 0x7];
+ unsigned long freq;
+
+ /*
+ * CLK1 Freq = Input Frequency * 2 * (VDW + 8) / ((RDW + 2) * OD)
+ *
+ * cw0: C1 C0 TTL F1 F0 S2 S1 S0
+ * cw1: V8 V7 V6 V5 V4 V3 V2 V1
+ * cw2: V0 R6 R5 R4 R3 R2 R1 R0
+ *
+ * R6:R0 = Reference Divider Word (RDW)
+ * V8:V0 = VCO Divider Word (VDW)
+ * S2:S0 = Output Divider Select (OD)
+ * F1:F0 = Function of CLK2 Output
+ * TTL = duty cycle
+ * C1:C0 = internal load capacitance for cyrstal
+ *
+ */
+
+ freq = input_freq * 2 * (vdw + 8) / ((rdw + 2) * od);
+
+ debug("ICS307: CW[0-2]: %02X %02X %02X => %lu Hz\n", cw0, cw1, cw2,
+ freq);
+ return freq;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ return ics307_clk_freq(
+ in_8(&pixis->sclk[0]),
+ in_8(&pixis->sclk[1]),
+ in_8(&pixis->sclk[2]));
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+ return ics307_clk_freq(
+ in_8(&pixis->dclk[0]),
+ in_8(&pixis->dclk[1]),
+ in_8(&pixis->dclk[2]));
+}
diff --git a/board/freescale/common/ics307_clk.h b/board/freescale/common/ics307_clk.h
new file mode 100644
index 0000000..db3dbc4
--- /dev/null
+++ b/board/freescale/common/ics307_clk.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ICS_CLK_H_
+#define __ICS_CLK_H_ 1
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_board_sys_clk(void);
+extern unsigned long get_board_ddr_clk(void);
+#endif
+
+#endif /* __ICS_CLK_H_ */
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index f0ff209..be4b2eb 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -313,155 +313,6 @@ int board_early_init_r(void)
return 0;
}
-#ifdef CONFIG_GET_CLK_FROM_ICS307
-/* decode S[0-2] to Output Divider (OD) */
-static unsigned char ics307_S_to_OD[] = {
- 10, 2, 8, 4, 5, 7, 3, 6
-};
-
-/* Calculate frequency being generated by ICS307-02 clock chip based upon
- * the control bytes being programmed into it. */
-/* XXX: This function should probably go into a common library */
-static unsigned long
-ics307_clk_freq(unsigned char cw0, unsigned char cw1, unsigned char cw2)
-{
- const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ;
- unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
- unsigned long RDW = cw2 & 0x7F;
- unsigned long OD = ics307_S_to_OD[cw0 & 0x7];
- unsigned long freq;
-
- /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */
-
- /* cw0: C1 C0 TTL F1 F0 S2 S1 S0
- * cw1: V8 V7 V6 V5 V4 V3 V2 V1
- * cw2: V0 R6 R5 R4 R3 R2 R1 R0
- *
- * R6:R0 = Reference Divider Word (RDW)
- * V8:V0 = VCO Divider Word (VDW)
- * S2:S0 = Output Divider Select (OD)
- * F1:F0 = Function of CLK2 Output
- * TTL = duty cycle
- * C1:C0 = internal load capacitance for cyrstal
- */
-
- /* Adding 1 to get a "nicely" rounded number, but this needs
- * more tweaking to get a "properly" rounded number. */
-
- freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD));
-
- debug("ICS307: CW[0-2]: %02X %02X %02X => %lu Hz\n", cw0, cw1, cw2,
- freq);
- return freq;
-}
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
- return gd->bus_clk;
-}
-
-unsigned long get_board_ddr_clk(ulong dummy)
-{
- return gd->mem_clk;
-}
-
-unsigned long calculate_board_sys_clk(ulong dummy)
-{
- ulong val;
-
- val = ics307_clk_freq(in_8(&pixis->sclk[0]), in_8(&pixis->sclk[1]),
- in_8(&pixis->sclk[2]));
- debug("sysclk val = %lu\n", val);
- return val;
-}
-
-unsigned long calculate_board_ddr_clk(ulong dummy)
-{
- ulong val;
-
- val = ics307_clk_freq(in_8(&pixis->dclk[0]), in_8(&pixis->dclk[1]),
- in_8(&pixis->dclk[2]));
- debug("ddrclk val = %lu\n", val);
- return val;
-}
-#else
-unsigned long get_board_sys_clk(ulong dummy)
-{
- u8 i;
- ulong val = 0;
-
- i = in_8(&pixis->spd);
- i &= 0x07;
-
- switch (i) {
- case 0:
- val = 33333333;
- break;
- case 1:
- val = 40000000;
- break;
- case 2:
- val = 50000000;
- break;
- case 3:
- val = 66666666;
- break;
- case 4:
- val = 83333333;
- break;
- case 5:
- val = 100000000;
- break;
- case 6:
- val = 133333333;
- break;
- case 7:
- val = 166666666;
- break;
- }
-
- return val;
-}
-
-unsigned long get_board_ddr_clk(ulong dummy)
-{
- u8 i;
- ulong val = 0;
-
- i = in_8(&pixis->spd);
- i &= 0x38;
- i >>= 3;
-
- switch (i) {
- case 0:
- val = 33333333;
- break;
- case 1:
- val = 40000000;
- break;
- case 2:
- val = 50000000;
- break;
- case 3:
- val = 66666666;
- break;
- case 4:
- val = 83333333;
- break;
- case 5:
- val = 100000000;
- break;
- case 6:
- val = 133333333;
- break;
- case 7:
- val = 166666666;
- break;
- }
- return val;
-}
-#endif
-
#ifdef CONFIG_TSEC_ENET
int board_eth_init(bd_t *bis)
{
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 66be725..9955501 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -27,6 +27,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include "../board/freescale/common/ics307_clk.h"
+
#ifdef CONFIG_MK_36BIT
#define CONFIG_PHYS_64BIT
#endif
@@ -54,17 +56,9 @@
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
-#ifndef __ASSEMBLY__
-extern unsigned long calculate_board_sys_clk(unsigned long dummy);
-extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
-/* extern unsigned long get_board_sys_clk(unsigned long dummy); */
-/* extern unsigned long get_board_ddr_clk(unsigned long dummy); */
-#endif
-#define CONFIG_SYS_CLK_FREQ calculate_board_sys_clk(0) /* sysclk for MPC85xx */
-#define CONFIG_DDR_CLK_FREQ calculate_board_ddr_clk(0) /* ddrclk for MPC85xx */
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */
+#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() /* ddrclk for MPC85xx */
#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */
-#define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq
- from ICS307 instead of switches */
/*
* These can be toggled for performance analysis, otherwise use default.
--
1.6.0.6
More information about the U-Boot
mailing list