[U-Boot] Support similar boards at same board file?

[Kyungmin Park]

Hi,

My bet is goni. Since it's new GPIO based board.

Thank you,
Kyungmin Park

> -----Original Message-----
> From: Minkyu Kang [mailto:promsoft at gmail.com]
> Sent: Tuesday, May 25, 2010 12:38 PM
> To: Wolfgang Denk
> Cc: u-boot at lists.denx.de; 박경민
> Subject: Re: Support similar boards at same board file?
> 
> Dear Wolfgang Denk,
> 
> On 25 May 2010 05:50, Wolfgang Denk <wd at denx.de> wrote:
> > Dear Minkyu Kang,
> >
> > In message <AANLkTinxDyzb6NiN8KBFl9V_lmu7mW0G8Kv-
> c6qgAc6f at mail.gmail.com> you wrote:
> >>
> >> >> I will post two boards "aquila" and "goni". (s5pc110 soc)
> >> >> These board are very similar and can detect the board by gpio. (at
> runtime)
> >> >> So, I want to support these two boards at same board file.
> >> >> Thus, I will use same binary at two boards.
> > ...
> >>
> >> Question...
> >> How I can configure the board directory?
> >> board/samsung/aquila or board/samsung/goni?
> >> or need another naming for two boards?
> >
> > Use either name (but don't invent a third one). Which one to use -
> > that's your choice. I cannot answer this. If one of the two boards is
> > more general or more popular than the other, then use this one.
> 
> OK.
> Thanks.
> 
> Minkyu Kang
> --
> from. prom.
> www.promsoft.net