[U-Boot] [PATCH] powerpc: add support for the Freescale P1022DS reference board

[Timur Tabi]

Wolfgang Denk wrote:

> There is exactly two entries in that table where it would make any
> difference, and if that's really that important to you, adding two
> spaces after the TAB would work wonders.

The column headers would be unaligned:

static const board_specific_parameters_t bsp[] = {
/*
 *      memory controller 0
 *	  lo|  hi|  num|  clk| cpo|wrdata|2T
 *       mhz| mhz|ranks|adjst|    | delay|
 */
	{  0, 333,    1,    5,  31,    3,  0},
	{334, 400,    1,    5,  31,    3,  0},
	{401, 549,    1,    5,  31,    3,  0},
	{550, 680,    1,    5,  31,    5,  0},
	{681, 850,    1,    5,  31,    5,  0},
	{  0, 333,    2,    5,  31,    3,  0},
	{334, 400,    2,    5,  31,    3,  0},
	{401, 549,    2,    5,  31,    3,  0},
	{550, 680,    2,    5,  31,    5,  0},
	{681, 850,    2,    5,  31,    5,  0},
};

>>> How about using get_ram_size() for autosizing / testing?
>>
>> It appears get_ram_size() has never been used on PowerPC before.   This
> 
> It appears you really haven't bothered checking. We have been using
> it on PowerPC since day 1 - for well over 10 years by now. On many,
> many systems. Get a clue!

Sorry, I must have used grep wrong or something.  I see what you're talking
about now.

-- 
Timur Tabi
Linux kernel developer at Freescale