[U-Boot] [PATCH 1/4 v2] Fix printing of make targets, simplify Makefile

Wolfgang Denk wd at denx.de
Thu May 27 23:18:33 CEST 2010


Make printing the "board names" more useful. So far, we would get
output like this;

$ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH
Configuring for P1_P2_RDB board...
   text    data     bss     dec     hex filename
 342612   32656  265212  640480   9c5e0 /work/wd/tmp-ppc/u-boot
Configuring for P1_P2_RDB board...
   text    data     bss     dec     hex filename
 343160   32704  265212  641076   9c834 /work/wd/tmp-ppc/u-boot
Configuring for P1_P2_RDB board...
   text    data     bss     dec     hex filename
 341908   32620  265212  639740   9c2fc /work/wd/tmp-ppc/u-boot
Configuring for P1_P2_RDB board...
   text    data     bss     dec     hex filename
 341908   32620  265212  639740   9c2fc /work/wd/tmp-ppc/u-boot

For all build targets the same board name would be printed, which
makes is often pretty difficult to find out which exact build target
caused problems. With this commit, the real make target name gets
printed instead, which is way more useful:

$ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH
Configuring for P2020RDB board...
   text    data     bss     dec     hex filename
 342612   32656  265212  640480   9c5e0 /work/wd/tmp-ppc/u-boot
Configuring for P2020RDB_NAND board...
   text    data     bss     dec     hex filename
 343160   32704  265212  641076   9c834 /work/wd/tmp-ppc/u-boot
Configuring for P2020RDB_SDCARD board...
   text    data     bss     dec     hex filename
 341908   32620  265212  639740   9c2fc /work/wd/tmp-ppc/u-boot
Configuring for P2020RDB_SPIFLASH board...
   text    data     bss     dec     hex filename
 341908   32620  265212  639740   9c2fc /work/wd/tmp-ppc/u-boot

Signed-off-by: Wolfgang Denk <wd at denx.de>
---
 Makefile |  740 ++++++++++++++++++++-----------------------------------------
 1 files changed, 243 insertions(+), 497 deletions(-)

diff --git a/Makefile b/Makefile
index 686e6fb..2f773cf 100644
--- a/Makefile
+++ b/Makefile
@@ -467,7 +467,7 @@ CHANGELOG:
 	unexpand -a | sed -e 's/\s\s*$$//' > $@
 
 include/license.h: tools/bin2header COPYING
-	 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
+	cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
 #########################################################################
 
 unconfig:
@@ -518,20 +518,16 @@ digsy_mtc_RAMBOOT_config:	unconfig
 	@mkdir -p $(obj)board/digsy_mtc
 	@ >$(obj)include/config.h
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
-		  echo "... with LOWBOOT configuration" ; \
-		}
+		echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp
 	@[ -z "$(findstring RAMBOOT_,$@)" ] || \
-		{ echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
-		  echo "... with RAMBOOT configuration" ; \
-		}
-	@$(MKCONFIG) -a digsy_mtc  powerpc mpc5xxx digsy_mtc
+		echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp
+	@$(MKCONFIG) -n $@ -a digsy_mtc  powerpc mpc5xxx digsy_mtc
 
 galaxy5200_LOWBOOT_config \
 galaxy5200_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
-	@$(MKCONFIG) -a galaxy5200 powerpc mpc5xxx galaxy5200
+	@$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200
 
 hmi1001_config:	unconfig
 	@$(MKCONFIG) hmi1001 powerpc mpc5xxx hmi1001
@@ -548,22 +544,15 @@ icecube_5200_DDR_LOWBOOT08_config:	unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/icecube
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		{ if [ "$(findstring DDR,$@)" ] ; \
+		if [ "$(findstring DDR,$@)" ] ; \
 			then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 			else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
-		  fi ; \
-		  $(XECHO) "... with LOWBOOT configuration" ; \
-		}
+		fi
 	@[ -z "$(findstring LOWBOOT08,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
-		  echo "... with 8 MB flash only" ; \
-		  $(XECHO) "... with LOWBOOT configuration" ; \
-		}
+		echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp
 	@[ -z "$(findstring DDR,$@)" ] || \
-		{ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... DDR memory revision" ; \
-		}
-	@$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube
+		echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube
 
 jupiter_config:	unconfig
 	@$(MKCONFIG) jupiter powerpc mpc5xxx jupiter
@@ -580,17 +569,12 @@ lite5200b_LOWBOOT_config:	unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/icecube
 	@ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h
-	@ $(XECHO) "... DDR memory revision"
 	@ echo "#define CONFIG_LITE5200B"	>>$(obj)include/config.h
 	@[ -z "$(findstring _PM_,$@)" ] || \
-		{ echo "#define CONFIG_LITE5200B_PM"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... with power management (low-power mode) support" ; \
-		}
+		echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
-		  $(XECHO) "... with LOWBOOT configuration" ; \
-		}
-	@$(MKCONFIG) -a IceCube  powerpc mpc5xxx icecube
+		echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp
+	@$(MKCONFIG) -n $@ -a IceCube  powerpc mpc5xxx icecube
 
 mcc200_config	\
 mcc200_SDRAM_config	\
@@ -606,38 +590,22 @@ prs200_highboot_config	\
 prs200_highboot_DDR_config:	unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/mcc200
-	@[ -n "$(findstring highboot,$@)" ] || \
-		{ $(XECHO) "... with lowboot configuration" ; \
-		}
 	@[ -z "$(findstring highboot,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
-		  $(XECHO) "... with highboot configuration" ; \
-		}
+		echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp
 	@[ -n "$(findstring _SDRAM,$@)" ] || \
-		{ if [ -n "$(findstring mcc200,$@)" ]; \
-		  then \
-			$(XECHO) "... with DDR" ; \
-		  else \
-			if [ -n "$(findstring _DDR,$@)" ];\
+		if [ -n "$(findstring prs200,$@)" ]; \
+		then \
+			if [ -z "$(findstring _DDR,$@)" ];\
 			then \
-				$(XECHO) "... with DDR" ; \
-			else \
 				echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
-				$(XECHO) "... with SDRAM" ; \
 			fi; \
-		  fi; \
-		}
+		fi
 	@[ -z "$(findstring _SDRAM,$@)" ] || \
-		{ echo "#define CONFIG_MCC200_SDRAM"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... with SDRAM" ; \
-		}
+		echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h
 	@[ -z "$(findstring COM12,$@)" ] || \
-		{ echo "#define CONFIG_CONSOLE_COM12"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... with console on COM12" ; \
-		}
+		echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h
 	@[ -z "$(findstring prs200,$@)" ] || \
-		{ echo "#define CONFIG_PRS200"	>>$(obj)include/config.h ;\
-		}
+		echo "#define CONFIG_PRS200" >>$(obj)include/config.h
 	@$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200
 
 mecp5200_config:  unconfig
@@ -657,7 +625,7 @@ MVBC_P_config: unconfig
 	@mkdir -p $(obj)board/mvbc_p
 	@ >$(obj)include/config.h
 	@[ -z "$(findstring MVBC_P,$@)" ] || \
-	{   	echo "#define CONFIG_MVBC_P" 	>>$(obj)include/config.h; }
+		echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h
 	@$(MKCONFIG) -n $@ -a MVBC_P powerpc mpc5xxx mvbc_p matrix_vision
 
 MVSMR_config: unconfig
@@ -673,10 +641,8 @@ pcm030_LOWBOOT_config:	unconfig
 	@mkdir -p $(obj)include $(obj)board/phytec/pcm030
 	@ >$(obj)include/config.h
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFF000000"	>$(obj)board/phytec/pcm030/config.tmp ; \
-		  echo "... with LOWBOOT configuration" ; \
-		}
-	@$(MKCONFIG) -a pcm030 powerpc mpc5xxx pcm030 phytec
+		echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp
+	@$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec
 
 pf5200_config:	unconfig
 	@$(MKCONFIG) pf5200  powerpc mpc5xxx pf5200 esd
@@ -687,14 +653,10 @@ PM520_ROMBOOT_config \
 PM520_ROMBOOT_DDR_config:	unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring DDR,$@)" ] || \
-		{ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... DDR memory revision" ; \
-		}
+		echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
 	@[ -z "$(findstring ROMBOOT,$@)" ] || \
-		{ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
-		  $(XECHO) "... booting from 8-bit flash" ; \
-		}
-	@$(MKCONFIG) -a PM520 powerpc mpc5xxx pm520
+		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520
 
 smmaco4_config: unconfig
 	@$(MKCONFIG) -a smmaco4 powerpc mpc5xxx tqm5200 tqc
@@ -706,9 +668,7 @@ TB5200_B_config \
 TB5200_config:	unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring _B,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... with MPC5200B processor" ; \
-		}
+		echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h
 	@$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc
 
 MINI5200_config	\
@@ -725,18 +685,12 @@ Total5200_Rev2_lowboot_config:	unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/total5200
 	@[ -n "$(findstring Rev,$@)" ] || \
-		{ echo "#define CONFIG_TOTAL5200_REV 1"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... revision 1 board" ; \
-		}
+		echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h
 	@[ -z "$(findstring Rev2_,$@)" ] || \
-		{ echo "#define CONFIG_TOTAL5200_REV 2"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... revision 2 board" ; \
-		}
+		echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h
 	@[ -z "$(findstring lowboot_,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
-		  $(XECHO) "... with lowboot configuration" ; \
-		}
-	@$(MKCONFIG) -a Total5200 powerpc mpc5xxx total5200
+		echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp
+	@$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200
 
 cam5200_config \
 cam5200_niosflash_config \
@@ -751,37 +705,26 @@ TQM5200_STK100_config:	unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/tqc/tqm5200
 	@[ -z "$(findstring cam5200,$@)" ] || \
-		{ echo "#define CONFIG_CAM5200"	>>$(obj)include/config.h ; \
-		  echo "#define CONFIG_TQM5200S"	>>$(obj)include/config.h ; \
-		  echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... TQM5200S on Cam5200" ; \
+		{ echo "#define CONFIG_CAM5200"	  >>$(obj)include/config.h ; \
+		  echo "#define CONFIG_TQM5200S"  >>$(obj)include/config.h ; \
+		  echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
 		}
 	@[ -z "$(findstring niosflash,$@)" ] || \
-		{ echo "#define CONFIG_CAM5200_NIOSFLASH"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... with NIOS flash driver" ; \
-		}
+		echo "#define CONFIG_CAM5200_NIOSFLASH"	>>$(obj)include/config.h
 	@[ -z "$(findstring fo300,$@)" ] || \
-		{ echo "#define CONFIG_FO300"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... TQM5200 on FO300" ; \
-		}
+		echo "#define CONFIG_FO300" >>$(obj)include/config.h
 	@[ -z "$(findstring MiniFAP,$@)" ] || \
-		{ echo "#define CONFIG_MINIFAP"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... TQM5200_AC on MiniFAP" ; \
-		}
+		echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h
 	@[ -z "$(findstring STK100,$@)" ] || \
-		{ echo "#define CONFIG_STK52XX_REV100"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... on a STK52XX.100 base board" ; \
-		}
+		echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h
 	@[ -z "$(findstring TQM5200_B,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \
-		}
+		echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h
 	@[ -z "$(findstring TQM5200S,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200S"	>>$(obj)include/config.h ; \
-		  echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \
+		{ echo "#define CONFIG_TQM5200S"  >>$(obj)include/config.h ; \
+		  echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
 		}
 	@[ -z "$(findstring HIGHBOOT,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
-		}
+		echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp
 	@$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc
 
 uc101_config:		unconfig
@@ -807,7 +750,7 @@ mpc5121ads_rev2_config	\
 	@if [ "$(findstring rev2,$@)" ] ; then \
 		echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 	fi
-	@$(MKCONFIG) -a mpc5121ads powerpc mpc512x mpc5121ads freescale
+	@$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale
 
 pdm360ng_config:	unconfig
 	@$(MKCONFIG) -a pdm360ng powerpc mpc512x pdm360ng
@@ -816,17 +759,15 @@ pdm360ng_config:	unconfig
 ## MPC8xx Systems
 #########################################################################
 
-Adder_config	\
 Adder87x_config \
 AdderII_config	\
+AdderUSB_config	\
+Adder_config	\
 	:		unconfig
 	@mkdir -p $(obj)include
 	$(if $(findstring AdderII,$@), \
-	@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
-	@$(MKCONFIG) -a Adder powerpc mpc8xx adder
-
-AdderUSB_config:	unconfig
-	@$(MKCONFIG) -a AdderUSB powerpc mpc8xx adder
+		@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
+	@$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder
 
 ADS860_config	  \
 FADS823_config	  \
@@ -834,7 +775,7 @@ FADS850SAR_config \
 MPC86xADS_config  \
 MPC885ADS_config  \
 FADS860T_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) powerpc mpc8xx fads
+	@$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8xx fads
 
 AMX860_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8xx amx860 westel
@@ -869,10 +810,8 @@ GEN860T_SC_config	\
 GEN860T_config: unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring _SC,$@)" ] || \
-		{ echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
-		  $(XECHO) "With reduced H/W feature set (SC)..." ; \
-		}
-	@$(MKCONFIG) -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t
+		echo "#define CONFIG_SC" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t
 
 GENIETV_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8xx genietv
@@ -895,10 +834,8 @@ ICU862_100MHz_config	\
 ICU862_config: unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring _100MHz,$@)" ] || \
-		{ echo "#define CONFIG_100MHz"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... with 100MHz system clock" ; \
-		}
-	@$(MKCONFIG) -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862
+		echo "#define CONFIG_100MHz" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862
 
 IP860_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8xx ip860
@@ -908,30 +845,24 @@ IVML24_128_config \
 IVML24_config:	unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring IVML24_config,$@)" ] || \
-		 { echo "#define CONFIG_IVML24_16M"	>>$(obj)include/config.h ; \
-		 }
+		echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h
 	@[ -z "$(findstring IVML24_128_config,$@)" ] || \
-		 { echo "#define CONFIG_IVML24_32M"	>>$(obj)include/config.h ; \
-		 }
+		echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h
 	@[ -z "$(findstring IVML24_256_config,$@)" ] || \
-		 { echo "#define CONFIG_IVML24_64M"	>>$(obj)include/config.h ; \
-		 }
-	@$(MKCONFIG) -a IVML24 powerpc mpc8xx ivm
+		echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a IVML24 powerpc mpc8xx ivm
 
 IVMS8_256_config \
 IVMS8_128_config \
 IVMS8_config:	unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring IVMS8_config,$@)" ] || \
-		 { echo "#define CONFIG_IVMS8_16M"	>>$(obj)include/config.h ; \
-		 }
+		echo "#define CONFIG_IVMS8_16M"	>>$(obj)include/config.h
 	@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
-		 { echo "#define CONFIG_IVMS8_32M"	>>$(obj)include/config.h ; \
-		 }
+		echo "#define CONFIG_IVMS8_32M"	>>$(obj)include/config.h
 	@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
-		 { echo "#define CONFIG_IVMS8_64M"	>>$(obj)include/config.h ; \
-		 }
-	@$(MKCONFIG) -a IVMS8 powerpc mpc8xx ivm
+		echo "#define CONFIG_IVMS8_64M"	>>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm
 
 kmsupx4_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
@@ -950,7 +881,7 @@ lwmon_config:		unconfig
 
 MBX_config	\
 MBX860T_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) powerpc mpc8xx mbx8xx
+	@$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8xx mbx8xx
 
 mgsuvd_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
@@ -964,14 +895,10 @@ NETVIA_V2_config \
 NETVIA_config:		unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring NETVIA_config,$@)" ] || \
-		 { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... Version 1" ; \
-		 }
+		echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h
 	@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
-		 { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
-		  $(XECHO) "... Version 2" ; \
-		 }
-	@$(MKCONFIG) -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia
+		echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia
 
 xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
 
@@ -979,12 +906,10 @@ NETPHONE_V2_config \
 NETPHONE_config:	unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring NETPHONE_config,$@)" ] || \
-		 { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
-		 }
+		echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h
 	@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
-		 { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
-		 }
-	@$(MKCONFIG) -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone
+		echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone
 
 xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
 
@@ -998,24 +923,18 @@ NETTA_6412_config \
 NETTA_config:		unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring ISDN_,$@)" ] || \
-		 { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
-		 }
+		echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h
 	@[ -n "$(findstring ISDN_,$@)" ] || \
-		 { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
-		 }
+		echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h
 	@[ -z "$(findstring 6412_,$@)" ] || \
-		 { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
-		 }
+		echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h
 	@[ -n "$(findstring 6412_,$@)" ] || \
-		 { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
-		 }
+		echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h
 	@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
-		 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
-		 }
+		echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h
 	@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
-		 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
-		 }
-	@$(MKCONFIG) -a $(call xtract_NETTA,$@) powerpc mpc8xx netta
+		echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a $(call xtract_NETTA,$@) powerpc mpc8xx netta
 
 xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
 
@@ -1023,28 +942,26 @@ NETTA2_V2_config \
 NETTA2_config:		unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring NETTA2_config,$@)" ] || \
-		 { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
-		 }
+		echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h
 	@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
-		 { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
-		 }
-	@$(MKCONFIG) -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2
+		echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2
 
 NC650_Rev1_config \
 NC650_Rev2_config \
 CP850_config:	unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring CP850,$@)" ] || \
-		 { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
-		   echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
-		 }
+		{ echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
+		  echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
+		}
 	@[ -z "$(findstring Rev1,$@)" ] || \
-		 { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
-		 }
+		{ echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
+		}
 	@[ -z "$(findstring Rev2,$@)" ] || \
-		 { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
-		 }
-	@$(MKCONFIG) -a NC650 powerpc mpc8xx nc650
+		{ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
+		}
+	@$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650
 
 NX823_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8xx nx823
@@ -1086,19 +1003,14 @@ RPXlite_DW_NVRAM_64_LCD_config	\
 RPXlite_DW_config:	unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring _64,$@)" ] || \
-		{ echo "#define RPXlite_64MHz"		>>$(obj)include/config.h ; \
-		  $(XECHO) "... with 64MHz system clock ..."; \
-		}
+		echo "#define RPXlite_64MHz"		>>$(obj)include/config.h
 	@[ -z "$(findstring _LCD,$@)" ] || \
 		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
 		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... with LCD display ..."; \
 		}
 	@[ -z "$(findstring _NVRAM,$@)" ] || \
-		{ echo "#define  CONFIG_ENV_IS_IN_NVRAM"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... with ENV in NVRAM ..."; \
-		}
-	@$(MKCONFIG) -a RPXlite_DW powerpc mpc8xx RPXlite_dw
+		echo "#define  CONFIG_ENV_IS_IN_NVRAM"	>>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw
 
 rmu_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8xx rmu
@@ -1161,9 +1073,8 @@ virtlab2_config:	unconfig
 	@[ -z "$(findstring _LCD,$@)" ] || \
 		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
 		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
-		  $(XECHO) "... with LCD display" ; \
 		}
-	@$(MKCONFIG) -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc
+	@$(MKCONFIG) -n $@ -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc
 
 TTTech_config:	unconfig
 	@mkdir -p $(obj)include
@@ -1253,25 +1164,21 @@ glacier_nand_config:	unconfig
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
 	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
 		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+	@$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
 
 CATcenter_config	\
 CATcenter_25_config	\
 CATcenter_33_config:	unconfig
 	@mkdir -p $(obj)include
-	@ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
-	@ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
+	@echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
+	@echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
 	@[ -z "$(findstring _25,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
-		  $(XECHO) "SysClk = 25MHz" ; \
-		}
+		echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h
 	@[ -z "$(findstring _33,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
-		  $(XECHO) "SysClk = 33MHz" ; \
-		}
-	@$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave
+		echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave
 
 CMS700_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx cms700 esd
@@ -1284,7 +1191,7 @@ CPCI4052_config		\
 CPCI405DT_config	\
 CPCI405AB_config:	unconfig
 	@mkdir -p $(obj)board/esd/cpci405
-	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci405 esd
+	@$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx cpci405 esd
 
 CPCIISER4_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpciiser4 esd
@@ -1387,9 +1294,9 @@ haleakala_nand_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/amcc/kilauea
 	@mkdir -p $(obj)nand_spl/board/amcc/kilauea
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+	@$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
 
 korat_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx korat
@@ -1448,7 +1355,7 @@ ocotea_config:	unconfig
 
 OCRTC_config		\
 ORSG_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocrtc esd
+	@$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx ocrtc esd
 
 p3p440_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx p3p440 prodrive
@@ -1483,26 +1390,16 @@ PPChameleonEVB_ME_33_config	\
 PPChameleonEVB_HI_33_config:	unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring EVB_BA,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
-		  $(XECHO) "... BASIC model" ; \
-		}
+		echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h
 	@[ -z "$(findstring EVB_ME,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... MEDIUM model" ; \
-		}
+		echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h
 	@[ -z "$(findstring EVB_HI,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
-		  $(XECHO) "... HIGH-END model" ; \
-		}
+		echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h
 	@[ -z "$(findstring _25,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
-		  $(XECHO) "SysClk = 25MHz" ; \
-		}
+		echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h
 	@[ -z "$(findstring _33,$@)" ] || \
-		{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
-		  $(XECHO) "SysClk = 33MHz" ; \
-		}
-	@$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave
+		echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave
 
 quad100hd_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx quad100hd
@@ -1530,9 +1427,9 @@ rainier_nand_config: unconfig
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
 	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
 		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
 
 sequoia_ramboot_config \
 rainier_ramboot_config: unconfig
@@ -1540,10 +1437,10 @@ rainier_ramboot_config: unconfig
 	@echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
 	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
 		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
 	@echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
 		$(obj)board/amcc/sequoia/config.tmp
+	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
 
 taihu_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx taihu amcc
@@ -1577,7 +1474,7 @@ VOM405_config:	unconfig
 
 W7OLMC_config	\
 W7OLMG_config: unconfig
-	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx w7o
+	@$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx w7o
 
 # Walnut & Sycamore images are identical (recognized via PVR)
 walnut_config \
@@ -1641,7 +1538,7 @@ zeus_config:	unconfig
 
 Alaska8220_config	\
 Yukon8220_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) powerpc mpc8220 alaska
+	@$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8220 alaska
 
 sorcery_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8220 sorcery
@@ -1662,16 +1559,14 @@ BMW_config: unconfig
 
 CPC45_config	\
 CPC45_ROMBOOT_config:	unconfig
-	@$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc824x cpc45
-	@cd $(obj)include ;				\
+	@mkdir -p $(obj)include ;				\
 	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
-		$(XECHO) "... booting from 8-bit flash" ; \
+		echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
 	else \
-		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
-		$(XECHO) "... booting from 64-bit flash" ; \
+		echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
 	fi; \
-	echo "export CONFIG_BOOT_ROM" >> config.mk;
+	echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
+	@$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc824x cpc45
 
 CU824_config: unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc824x cu824
@@ -1739,33 +1634,29 @@ cogent_mpc8260_config:	unconfig
 
 CPU86_config	\
 CPU86_ROMBOOT_config: unconfig
-	@$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu86
-	@cd $(obj)include ;				\
+	@mkdir -p  $(obj)include ;				\
 	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
-		$(XECHO) "... booting from 8-bit flash" ; \
+		echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
 	else \
-		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
-		$(XECHO) "... booting from 64-bit flash" ; \
+		echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
 	fi; \
-	echo "export CONFIG_BOOT_ROM" >> config.mk;
+	echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
+	@$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc8260 cpu86
 
 CPU87_config	\
 CPU87_ROMBOOT_config: unconfig
-	@$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu87
-	@cd $(obj)include ;				\
+	@mkdir -p $(obj)include ;				\
 	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
-		$(XECHO) "... booting from 8-bit flash" ; \
+		echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
 	else \
-		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
-		$(XECHO) "... booting from 64-bit flash" ; \
+		echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
 	fi; \
-	echo "export CONFIG_BOOT_ROM" >> config.mk;
+	echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
+	@$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc8260 cpu87
 
 ep8248_config	\
 ep8248E_config	:	unconfig
-	@$(MKCONFIG) ep8248 powerpc mpc8260 ep8248
+	@$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248
 
 ep8260_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep8260
@@ -1791,7 +1682,7 @@ ISPAN_REVB_config:	unconfig
 	@if [ "$(findstring _REVB_,$@)" ] ; then \
 		echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
 	fi
-	@$(MKCONFIG) -a ISPAN powerpc mpc8260 ispan
+	@$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan
 
 mgcoge_config	:	unconfig
 	@$(MKCONFIG) mgcoge powerpc mpc8260 mgcoge keymile
@@ -1823,10 +1714,8 @@ PQ2FADS-ZU_66MHz_lowboot_config	\
 	$(if $(findstring VR,$@), \
 	@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
 	@[ -z "$(findstring lowboot_,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
-		  $(XECHO) "... with lowboot configuration" ; \
-		}
-	@$(MKCONFIG) -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
+		echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp
+	@$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
 
 MPC8266ADS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8260 mpc8266ads freescale
@@ -1838,7 +1727,7 @@ muas3001_config	:	unconfig
 	@if [ "$(findstring dev,$@)" ] ; then \
 		echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
 	fi
-	@$(MKCONFIG) -a muas3001 powerpc mpc8260 muas3001
+	@$(MKCONFIG) -n $@ -a muas3001 powerpc mpc8260 muas3001
 
 # PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
 PM825_config	\
@@ -1857,15 +1746,12 @@ PM826_ROMBOOT_BIGFLASH_config:	unconfig
 		>$(obj)include/config.h ; \
 	fi
 	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		$(XECHO) "... booting from 8-bit flash" ; \
 		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
 		echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
 		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
-			$(XECHO) "... with 32 MB Flash" ; \
 			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
 		fi; \
 	else \
-		$(XECHO) "... booting from 64-bit flash" ; \
 		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
 			$(XECHO) "... with 32 MB Flash" ; \
 			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
@@ -1874,7 +1760,7 @@ PM826_ROMBOOT_BIGFLASH_config:	unconfig
 			echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
 		fi; \
 	fi
-	@$(MKCONFIG) -a PM826 powerpc mpc8260 pm826
+	@$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826
 
 PM828_config	\
 PM828_PCI_config	\
@@ -1884,14 +1770,12 @@ PM828_ROMBOOT_PCI_config:	unconfig
 	@mkdir -p $(obj)board/pm826
 	@if [ "$(findstring _PCI_,$@)" ] ; then \
 		echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
-		$(XECHO) "... with PCI enabled" ; \
 	fi
 	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		$(XECHO) "... booting from 8-bit flash" ; \
 		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
 		echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
 	fi
-	@$(MKCONFIG) -a PM828 powerpc mpc8260 pm828
+	@$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828
 
 ppmc8260_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8260 ppmc8260
@@ -1900,8 +1784,8 @@ Rattler8248_config	\
 Rattler_config:		unconfig
 	@mkdir -p $(obj)include
 	$(if $(findstring 8248,$@), \
-	@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
-	@$(MKCONFIG) -a Rattler powerpc mpc8260 rattler
+		@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
+	@$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler
 
 RPXsuper_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8260 rpxsuper
@@ -1947,22 +1831,17 @@ TQM8265_AA_config:  unconfig
 		echo "#define CONFIG_$${CTYPE}"	>>$(obj)include/config.h ; \
 	fi; \
 	echo "#define CONFIG_$${CFREQ}MHz"	>>$(obj)include/config.h ; \
-	echo "... with $${CFREQ}MHz system clock" ; \
 	if [ "$${CACHE}" = "yes" ] ; then \
 		echo "#define CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with L2 Cache support" ; \
 	else \
 		echo "#undef CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
-		$(XECHO) "... without L2 Cache support" ; \
 	fi; \
 	if [ "$${BMODE}" = "60x" ] ; then \
 		echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
-		$(XECHO) "... with 60x Bus Mode" ; \
 	else \
 		echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
-		$(XECHO) "... without 60x Bus Mode" ; \
 	fi
-	@$(MKCONFIG) -a TQM8260 powerpc mpc8260 tqm8260 tqc
+	@$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc
 
 TQM8272_config: unconfig
 	@$(MKCONFIG) TQM8272 powerpc mpc8260 tqm8272 tqc
@@ -1971,7 +1850,7 @@ VoVPN-GW_66MHz_config	\
 VoVPN-GW_100MHz_config:		unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
-	@$(MKCONFIG) -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk
+	@$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk
 
 ZPC1900_config: unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc8260 zpc1900
@@ -1982,7 +1861,7 @@ ZPC1900_config: unconfig
 
 astro_mcf5373l_config \
 astro_mcf5373l_RAM_config :	unconfig
-	@$(MKCONFIG) -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro
+	@$(MKCONFIG) -n $@ -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro
 
 M5208EVBE_config :		unconfig
 	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
@@ -1999,16 +1878,14 @@ M52277EVB_stmicro_config :	unconfig
 		echo "#define CONFIG_SYS_SPANSION_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
 		cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
-		$(XECHO) "... with SPANSION boot..." ; \
 	fi; \
 	if [ "$${FLASH}" = "STMICRO" ] ; then \
 		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
 		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
 		cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
-		$(XECHO) "... with ST Micro boot..." ; \
 	fi
-	@$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
+	@$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale
 
 M5235EVB_config \
 M5235EVB_Flash16_config \
@@ -2026,7 +1903,7 @@ M5235EVB_Flash32_config:	unconfig
 		echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
 		cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
 	fi
-	@$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
+	@$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale
 
 M5249EVB_config :		unconfig
 	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
@@ -2044,13 +1921,13 @@ EB+MCF-EV123_config :		unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/BuS/EB+MCF-EV123
 	@echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
-	@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+	@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
 
 EB+MCF-EV123_internal_config :	unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/BuS/EB+MCF-EV123
 	@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
-	@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+	@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
 
 EP2500_config:			unconfig
 	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury
@@ -2082,7 +1959,7 @@ M5329BFEE_config :	unconfig
 	if [ "$${NAND}" != "0" ] ; then \
 		echo "#define NANDFLASH_SIZE	$${NAND}" > $(obj)include/config.h ; \
 	fi
-	@$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
+	@$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale
 
 M5373EVB_config :	unconfig
 	@case "$@" in \
@@ -2102,17 +1979,15 @@ M54451EVB_stmicro_config :	unconfig
 	if [ "$${FLASH}" = "NOR" ] ; then \
 		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
 		cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
-		$(XECHO) "... with NOR boot..." ; \
 	fi; \
 	if [ "$${FLASH}" = "STMICRO" ] ; then \
 		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
 		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
 		cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
-		$(XECHO) "... with ST Micro boot..." ; \
 	fi; \
 	echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
-	@$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
+	@$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale
 
 M54455EVB_config \
 M54455EVB_atmel_config \
@@ -2136,24 +2011,20 @@ M54455EVB_stm33_config :	unconfig
 		echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
-		$(XECHO) "... with INTEL boot..." ; \
 	fi; \
 	if [ "$${FLASH}" = "ATMEL" ] ; then \
 		echo "#define CONFIG_SYS_ATMEL_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
-		$(XECHO) "... with ATMEL boot..." ; \
 	fi; \
 	if [ "$${FLASH}" = "STMICRO" ] ; then \
 		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
 		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
-		$(XECHO) "... with ST Micro boot..." ; \
 	fi; \
 	echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
-	$(XECHO) "... with $${FREQ}Hz input clock"
-	@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
+	@$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale
 
 M5475AFE_config \
 M5475BFE_config \
@@ -2186,7 +2057,7 @@ M5475GFE_config :	unconfig
 	if [ "$${USB}" == "1" ] ; then \
 		echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
 	fi
-	@$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
+	@$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale
 
 M5485AFE_config \
 M5485BFE_config \
@@ -2221,7 +2092,7 @@ M5485HFE_config :	unconfig
 	if [ "$${USB}" == "1" ] ; then \
 		echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
 	fi
-	@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
+	@$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale
 
 TASREG_config :		unconfig
 	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
@@ -2240,26 +2111,23 @@ MPC8313ERDB_NAND_66_config: unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/freescale/mpc8313erdb
 	@if [ "$(findstring _33_,$@)" ] ; then \
-		$(XECHO) -n "...33M ..." ; \
 		echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
-		$(XECHO) -n "...66M..." ; \
 		echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _NAND_,$@)" ] ; then \
-		$(XECHO) -n "...NAND..." ; \
 		echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
 		echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
 	fi ;
-	@$(MKCONFIG) -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale
 	@if [ "$(findstring _NAND_,$@)" ] ; then \
 		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
 	fi ;
+	@$(MKCONFIG) -n $@ -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale
 
 MPC8315ERDB_NAND_config \
 MPC8315ERDB_config: unconfig
-	@$(MKCONFIG) -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale
+	@$(MKCONFIG) -n $@ -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale
 
 MPC8323ERDB_config:	unconfig
 	@$(MKCONFIG) -a MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
@@ -2271,30 +2139,25 @@ MPC832XEMDS_SLAVE_config \
 MPC832XEMDS_ATM_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _HOST_,$@)" ] ; then \
-		$(XECHO) -n "... PCI HOST " ; \
 		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _SLAVE_,$@)" ] ; then \
-		$(XECHO) "...PCI SLAVE 66M"  ; \
 		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
 		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		$(XECHO) -n "...33M ..." ; \
 		echo "#define PCI_33M" >>$(obj)include/config.h ; \
 		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
-		$(XECHO) -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
 		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _ATM_,$@)" ] ; then \
-		$(XECHO) -n "...ATM..." ; \
 		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 		echo "#define CONFIG_PQ_MDS_PIB_ATM	1" >>$(obj)include/config.h ; \
 	fi ;
-	@$(MKCONFIG) -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale
+	@$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale
 
 MPC8349EMDS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc83xx mpc8349emds freescale
@@ -2311,7 +2174,7 @@ MPC8349ITXGP_config:	unconfig
 	@if [ "$(findstring LOWBOOT,$@)" ] ; then \
 		echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
 	fi
-	@$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX powerpc mpc83xx mpc8349itx freescale
+	@$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale
 
 MPC8360EMDS_config \
 MPC8360EMDS_HOST_33_config \
@@ -2320,49 +2183,42 @@ MPC8360EMDS_SLAVE_config \
 MPC8360EMDS_ATM_config: unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _HOST_,$@)" ] ; then \
-		$(XECHO) -n "... PCI HOST " ; \
 		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _SLAVE_,$@)" ] ; then \
-		$(XECHO) "...PCI SLAVE 66M"  ; \
 		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
 		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		$(XECHO) -n "...33M ..." ; \
 		echo "#define PCI_33M" >>$(obj)include/config.h ; \
 		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
-		$(XECHO) -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
 		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _ATM_,$@)" ] ; then \
-		$(XECHO) -n "...ATM..." ; \
 		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 		echo "#define CONFIG_PQ_MDS_PIB_ATM	1" >>$(obj)include/config.h ; \
 	fi ;
-	@$(MKCONFIG) -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale
+	@$(MKCONFIG) -n $@ -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale
 
 MPC8360ERDK_33_config \
 MPC8360ERDK_66_config \
 MPC8360ERDK_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _33_,$@)" ] ; then \
-		$(XECHO) -n "... CLKIN 33MHz " ; \
 		echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
 	fi ;
-	@$(MKCONFIG) -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale
+	@$(MKCONFIG) -n $@ -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale
 
 MPC837XEMDS_config \
 MPC837XEMDS_HOST_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _HOST_,$@)" ] ; then \
-		$(XECHO) -n "... PCI HOST " ; \
 		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
 	fi ;
-	@$(MKCONFIG) -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale
+	@$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale
 
 MPC837XERDB_config:	unconfig
 	@$(MKCONFIG) -a MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
@@ -2373,29 +2229,27 @@ MVBLM7_config: unconfig
 sbc8349_config \
 sbc8349_PCI_33_config \
 sbc8349_PCI_66_config: unconfig
-	@$(MKCONFIG) -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349
+	@$(MKCONFIG) -n $@ -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349
 
 SIMPC8313_LP_config \
 SIMPC8313_SP_config: unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/sheldon/simpc8313
 	@if [ "$(findstring _LP_,$@)" ] ; then \
-		$(XECHO) -n "...Large Page NAND..." ; \
 		echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _SP_,$@)" ] ; then \
-		$(XECHO) -n "...Small Page NAND..." ; \
 		echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
 	fi ;
-	@$(MKCONFIG) -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+	@$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon
 
 TQM834x_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc83xx tqm834x tqc
 
 caddy2_config \
 vme8349_config:		unconfig
-	@$(MKCONFIG) -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd
+	@$(MKCONFIG) -n $@ -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd
 
 edb9301_config \
 edb9302_config \
@@ -2405,7 +2259,7 @@ edb9307a_config \
 edb9312_config \
 edb9315_config \
 edb9315a_config: unconfig
-	@$(MKCONFIG) -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx
+	@$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx
 
 #########################################################################
 ## MPC85xx Systems
@@ -2419,7 +2273,7 @@ MPC8536DS_SDCARD_config \
 MPC8536DS_SPIFLASH_config \
 MPC8536DS_36BIT_config \
 MPC8536DS_config:       unconfig
-	@$(MKCONFIG) -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale
+	@$(MKCONFIG) -n $@ -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale
 
 MPC8540ADS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8540ads freescale
@@ -2428,21 +2282,15 @@ MPC8540EVAL_config \
 MPC8540EVAL_33_config \
 MPC8540EVAL_66_config \
 MPC8540EVAL_33_slave_config \
-MPC8540EVAL_66_slave_config:	  unconfig
+MPC8540EVAL_66_slave_config:	unconfig
 	@mkdir -p $(obj)include
-	@if [ "$(findstring _33_,$@)" ] ; then \
-		$(XECHO) "... 33 MHz PCI" ; \
-	else \
+	@if [ -z "$(findstring _33_,$@)" ] ; then \
 		echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
-		$(XECHO) "... 66 MHz PCI" ; \
 	fi ; \
 	if [ "$(findstring _slave_,$@)" ] ; then \
 		echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
-		$(XECHO) " slave" ; \
-	else \
-		$(XECHO) " host" ; \
 	fi
-	@$(MKCONFIG) -a MPC8540EVAL powerpc mpc85xx mpc8540eval
+	@$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval
 
 MPC8560ADS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8560ads freescale
@@ -2452,9 +2300,8 @@ MPC8541CDS_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _legacy_,$@)" ] ; then \
 		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
-		$(XECHO) "... legacy" ; \
 	fi
-	@$(MKCONFIG) -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale
+	@$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale
 
 MPC8544DS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8544ds freescale
@@ -2464,18 +2311,16 @@ MPC8548CDS_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _legacy_,$@)" ] ; then \
 		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
-		$(XECHO) "... legacy" ; \
 	fi
-	@$(MKCONFIG) -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale
+	@$(MKCONFIG) -n $@ -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale
 
 MPC8555CDS_legacy_config \
 MPC8555CDS_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _legacy_,$@)" ] ; then \
 		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
-		$(XECHO) "... legacy" ; \
 	fi
-	@$(MKCONFIG) -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale
+	@$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale
 
 MPC8568MDS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8568mds freescale
@@ -2483,15 +2328,15 @@ MPC8568MDS_config:	unconfig
 MPC8569MDS_ATM_config \
 MPC8569MDS_NAND_config \
 MPC8569MDS_config:	unconfig
-	@$(MKCONFIG) -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale
+	@$(MKCONFIG) -n $@ -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale
 
 MPC8572DS_36BIT_config \
 MPC8572DS_config:       unconfig
-	@$(MKCONFIG) -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale
+	@$(MKCONFIG) -n $@ -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale
 
 P2020DS_36BIT_config \
 P2020DS_config:		unconfig
-	@$(MKCONFIG) -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale
+	@$(MKCONFIG) -n $@ -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale
 
 P1011RDB_config	\
 P1011RDB_NAND_config \
@@ -2509,7 +2354,7 @@ P2020RDB_config \
 P2020RDB_NAND_config \
 P2020RDB_SDCARD_config \
 P2020RDB_SPIFLASH_config:	unconfig
-	@$(MKCONFIG) -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale
+	@$(MKCONFIG) -n $@ -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale
 
 PM854_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm854
@@ -2520,19 +2365,19 @@ PM856_config:	unconfig
 sbc8540_config \
 sbc8540_33_config \
 sbc8540_66_config:	unconfig
-	@$(MKCONFIG) -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560
+	@$(MKCONFIG) -n $@ -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560
 
 sbc8548_config \
 sbc8548_PCI_33_config \
 sbc8548_PCI_66_config \
 sbc8548_PCI_33_PCIE_config \
 sbc8548_PCI_66_PCIE_config: unconfig
-	@$(MKCONFIG) -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548
+	@$(MKCONFIG) -n $@ -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548
 
 sbc8560_config \
 sbc8560_33_config \
 sbc8560_66_config:	unconfig
-	@$(MKCONFIG) -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560
+	@$(MKCONFIG) -n $@ -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560
 
 socrates_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc85xx socrates
@@ -2545,9 +2390,8 @@ stxssa_4M_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _4M_,$@)" ] ; then \
 		echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
-		$(XECHO) "... with 4 MiB flash memory" ; \
 	fi
-	@$(MKCONFIG) -a stxssa powerpc mpc85xx stxssa stx
+	@$(MKCONFIG) -n $@ -a stxssa powerpc mpc85xx stxssa stx
 
 TQM8540_config		\
 TQM8541_config		\
@@ -2559,13 +2403,12 @@ TQM8560_config:		unconfig
 	@mkdir -p $(obj)include
 	@BTYPE=$(@:_config=); \
 	CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
-	$(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
 	echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
 	echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
 	echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
 	echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
-	@$(MKCONFIG) -a TQM85xx powerpc mpc85xx tqm85xx tqc
 	@echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
+	@$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc
 
 XPEDITE5200_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5200 xes
@@ -2585,9 +2428,8 @@ MPC8641HPCN_config:    unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _36BIT_,$@)" ] ; then \
 		echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
-		$(XECHO) "... enabling 36-bit physical addressing." ; \
 	fi
-	@$(MKCONFIG) -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale
+	@$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale
 
 sbc8641d_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc mpc86xx sbc8641d
@@ -2619,7 +2461,7 @@ ELPPC_config: unconfig
 
 EVB64260_config	\
 EVB64260_750CX_config:	unconfig
-	@$(MKCONFIG) EVB64260 powerpc 74xx_7xx evb64260
+	@$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260
 
 mpc7448hpc2_config:  unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx mpc7448hpc2 freescale
@@ -2635,11 +2477,11 @@ p3m7448_config:		unconfig
 	else \
 		echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
 	fi
-	@$(MKCONFIG) -a p3mx powerpc 74xx_7xx p3mx prodrive
+	@$(MKCONFIG) -n $@ -a p3mx powerpc 74xx_7xx p3mx prodrive
 
 PCIPPC2_config \
 PCIPPC6_config: unconfig
-	@$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx pcippc2
+	@$(MKCONFIG) -n $@ $(@:_config=) powerpc 74xx_7xx pcippc2
 
 ppmc7xx_config: unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx ppmc7xx
@@ -2693,7 +2535,7 @@ CPUAT91_RAM_config \
 CPUAT91_config	:	unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_$(@:_config=) 1"	>$(obj)include/config.h
-	@$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
+	@$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
 
 csb637_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
@@ -2731,21 +2573,17 @@ at91sam9g20ek_config	:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring 9g20,$@)" ] ; then \
 		echo "#define CONFIG_AT91SAM9G20EK 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... 9G20 Variant" ; \
 	else \
 		echo "#define CONFIG_AT91SAM9260EK 1"	>>$(obj)include/config.h ; \
 	fi;
 	@if [ "$(findstring _nandflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in NAND FLASH" ; \
 	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
 	else \
 		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
 	fi;
-	@$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+	@$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
 
 at91sam9xeek_nandflash_config \
 at91sam9xeek_dataflash_cs0_config \
@@ -2754,15 +2592,12 @@ at91sam9xeek_config	:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _nandflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in NAND FLASH" ; \
 	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
 	else \
 		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
 	fi;
-	@$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+	@$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
 
 at91sam9261ek_nandflash_config \
 at91sam9261ek_dataflash_cs0_config \
@@ -2775,21 +2610,17 @@ at91sam9g10ek_config	:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring 9g10,$@)" ] ; then \
 		echo "#define CONFIG_AT91SAM9G10EK 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... 9G10 Variant" ; \
 	else \
 		echo "#define CONFIG_AT91SAM9261EK 1"	>>$(obj)include/config.h ; \
 	fi;
 	@if [ "$(findstring _nandflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in NAND FLASH" ; \
 	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
 	else \
 		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
 	fi;
-	@$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
+	@$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
 
 at91sam9263ek_norflash_config \
 at91sam9263ek_norflash_boot_config \
@@ -2800,19 +2631,15 @@ at91sam9263ek_config	:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _nandflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in NAND FLASH" ; \
 	elif [ "$(findstring norflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NORFLASH 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in NOR FLASH" ; \
 	else \
 		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
 	fi;
 	@if [ "$(findstring norflash_boot,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... and boot from NOR FLASH" ; \
 	fi;
-	@$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
+	@$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
 
 at91sam9rlek_nandflash_config \
 at91sam9rlek_dataflash_config \
@@ -2821,12 +2648,10 @@ at91sam9rlek_config	:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _nandflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in NAND FLASH" ; \
 	else \
 		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
 	fi;
-	@$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
+	@$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
 
 CPU9G20_128M_config \
 CPU9G20_config \
@@ -2834,7 +2659,7 @@ CPU9260_128M_config \
 CPU9260_config	:	unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
-	@$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
+	@$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91
 
 meesc_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
@@ -2853,19 +2678,15 @@ at91sam9g45ekes_config	:	unconfig
 	@mkdir -p $(obj)include
 		@if [ "$(findstring 9m10,$@)" ] ; then \
 		echo "#define CONFIG_AT91SAM9M10G45EK 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... 9M10G45 Variant" ; \
 	else \
 		echo "#define CONFIG_AT91SAM9G45EKES 1"	>>$(obj)include/config.h ; \
 	fi;
-
 	@if [ "$(findstring _nandflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in NAND FLASH" ; \
 	else \
 		echo "#define CONFIG_ATMEL_SPI 1"	>>$(obj)include/config.h ; \
-		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
 	fi;
-	@$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
+	@$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
 
 otc570_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91
@@ -2878,7 +2699,7 @@ SBC35_A9G20_EEPROM_config \
 SBC35_A9G20_config	:	unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
-	@$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
+	@$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
 
 TNY_A9G20_NANDFLASH_config \
 TNY_A9G20_EEPROM_config \
@@ -2888,7 +2709,7 @@ TNY_A9260_EEPROM_config \
 TNY_A9260_config	:	unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
-	@$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
+	@$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91
 
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
@@ -2916,32 +2737,17 @@ cp922_XA10_config	\
 cp1026_config: unconfig
 	@board/armltd/integrator/split_by_variant.sh cp $@
 
-da830evm_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs da830evm davinci davinci
-
-davinci_dvevm_config :	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
-
-davinci_schmoogie_config :	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
-
-davinci_sffsdr_config :	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
-
-davinci_sonata_config :	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
-
-davinci_dm355evm_config :	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
-
-davinci_dm355leopard_config :	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
-
-davinci_dm365evm_config :	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
-
-davinci_dm6467evm_config :	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
+da830evm_config			\
+davinci_dvevm_config		\
+davinci_schmoogie_config	\
+davinci_sffsdr_config		\
+davinci_sonata_config		\
+davinci_dm355evm_config		\
+davinci_dm355leopard_config	\
+davinci_dm365evm_config		\
+davinci_dm6467evm_config	:	unconfig
+	@$(MKCONFIG) -n $@ $(@:_config=) arm arm926ejs \
+		$(subst davinci_,,$(@:_config=)) davinci davinci
 
 guruplug_config: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
@@ -2952,7 +2758,7 @@ imx27lite_config:	unconfig
 
 lpd7a400_config \
 lpd7a404_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
+	@$(MKCONFIG) -n $(@:_config=) arm lh7a40x lpd7a40x
 
 mv88f6281gtw_ge_config: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
@@ -2972,11 +2778,8 @@ nhk8815_onenand_config:	unconfig
 	@ > $(obj)include/config.h
 	@if [ "$(findstring _onenand, $@)" ] ; then \
 		echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
-		$(XECHO) "... configured to boot from OneNand Flash"; \
-	else \
-		$(XECHO) "... configured to boot from Nand Flash"; \
 	fi
-	@$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
+	@$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik
 
 omap1510inn_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
@@ -2994,15 +2797,12 @@ omap1610h2_cs_autoboot_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
 		echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
-		$(XECHO) "... configured for CS0 boot"; \
 	elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
 		echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
-		$(XECHO) "... configured for CS_AUTO boot"; \
 	else \
 		echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
-		$(XECHO) "... configured for CS3 boot"; \
 	fi;
-	@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
+	@$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
 
 omap5912osk_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
@@ -3018,12 +2818,10 @@ omap730p2_cs3boot_config :	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
 		echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
-		$(XECHO) "... configured for CS0 boot"; \
 	else \
 		echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
-		$(XECHO) "... configured for CS3 boot"; \
 	fi;
-	@$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
+	@$(MKCONFIG) -n $@ -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
 
 rd6281a_config: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
@@ -3059,12 +2857,10 @@ SX1_config:		unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _stdout_serial_, $@)" ] ; then \
 		echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
-		$(XECHO) "... configured for stdout serial"; \
 	else \
 		echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
-		$(XECHO) "... configured for stdout usbtty"; \
 	fi;
-	@$(MKCONFIG) SX1 arm arm925t sx1
+	@$(MKCONFIG) -n $@ SX1 arm arm925t sx1
 
 # TRAB default configuration:	8 MB Flash, 32 MB RAM
 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
@@ -3078,25 +2874,22 @@ trab_old_config:	unconfig
 	@[ -z "$(findstring _bigram,$@)" ] || \
 		{ echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
 		  echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
-		  $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
 		}
 	@[ -z "$(findstring _bigflash,$@)" ] || \
 		{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
 		  echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
-		  $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
 		  echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
 		}
 	@[ -z "$(findstring _old,$@)" ] || \
 		{ echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
 		  echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
-		  $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
 		  echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
 		}
-	@$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
+	@$(MKCONFIG) -n $@ -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
 
 tx25_config	: unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25
 
 VCMA9_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
@@ -3233,9 +3026,8 @@ scpu_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring scpu_,$@)" ] ; then \
 		echo "#define CONFIG_SCPU"	>>$(obj)include/config.h ; \
-		$(XECHO) "... on SCPU board variant" ; \
 	fi
-	@$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
+	@$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive
 
 pxa255_idp_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
@@ -3246,7 +3038,7 @@ trizepsiv_config	:	unconfig
 	@if [ "$(findstring polaris,$@)" ] ; then \
 		echo "#define CONFIG_POLARIS 1"	>>$(obj)include/config.h ; \
 	fi;
-	@$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
+	@$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv
 
 wepep250_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm pxa wepep250
@@ -3270,8 +3062,8 @@ zylonite_config :
 apollon_config		: unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
-	@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
 	@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
+	@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
 
 imx31_litekit_config	: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
@@ -3282,7 +3074,7 @@ imx31_phycore_config	: unconfig
 	@if [ -n "$(findstring _eet_,$@)" ]; then			\
 		echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;	\
 	fi
-	@$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
+	@$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
 
 mx31ads_config		: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
@@ -3296,7 +3088,7 @@ mx31pdk_nand_config	: unconfig
 		echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;	\
 		echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;	\
 	fi
-	@$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
+	@$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31
 
 mx51evk_config	: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51
@@ -3315,14 +3107,13 @@ smdk6400_config	:	unconfig
 	@mkdir -p $(obj)include $(obj)board/samsung/smdk6400
 	@mkdir -p $(obj)nand_spl/board/samsung/smdk6400
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 	@if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then			\
 		echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
-		$(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx;		\
 	else										\
 		echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
-		$(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx;	\
 	fi
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+	@$(MKCONFIG) $(subst _noUSB,,$(@:_config=)) arm arm1176 smdk6400 samsung s3c64xx
 
 #========================================================================
 # i386
@@ -3349,26 +3140,18 @@ sc520_spunk_rel_config	:	unconfig
 ## MIPS32 4Kc
 #########################################################################
 
-xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
-
 incaip_100MHz_config	\
 incaip_133MHz_config	\
 incaip_150MHz_config	\
 incaip_config: unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring _100MHz,$@)" ] || \
-		{ echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
-		  $(XECHO) "... with 100MHz system clock" ; \
-		}
+		echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h
 	@[ -z "$(findstring _133MHz,$@)" ] || \
-		{ echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
-		  $(XECHO) "... with 133MHz system clock" ; \
-		}
+		echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h
 	@[ -z "$(findstring _150MHz,$@)" ] || \
-		{ echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
-		  $(XECHO) "... with 150MHz system clock" ; \
-		}
-	@$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
+		echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a incaip mips mips incaip
 
 tb0229_config: unconfig
 	@$(MKCONFIG) $(@:_config=) mips mips tb0229
@@ -3386,27 +3169,17 @@ vct_platinumavc_small_config	\
 vct_platinumavc_onenand_config	\
 vct_platinumavc_onenand_small_config: unconfig
 	@mkdir -p $(obj)include
-	@if [ "$(findstring _premium,$@)" ] ; then \
-		echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
-		$(XECHO) "... on Premium board variant" ; \
-	fi
-	@if [ "$(findstring _platinum_,$@)" ] ; then \
-		echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
-		$(XECHO) "... on Platinum board variant" ; \
-	fi
-	@if [ "$(findstring _platinumavc,$@)" ] ; then \
-		echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
-		$(XECHO) "... on PlatinumAVC board variant" ; \
-	fi
-	@if [ "$(findstring _onenand,$@)" ] ; then \
-		echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
-		$(XECHO) "... on OneNAND board variant" ; \
-	fi
-	@if [ "$(findstring _small,$@)" ] ; then \
-		echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
-		$(XECHO) "... stripped down image variant" ; \
-	fi
-	@$(MKCONFIG) -a vct mips mips vct micronas
+	@[ -z "$(findstring _premium,$@)" ] || \
+		echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h
+	@[ -z "$(findstring _platinum_,$@)" ] || \
+		echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h
+	@[ -z "$(findstring _platinumavc,$@)" ] || \
+		echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h
+	@[ -z "$(findstring _onenand,$@)" ] || \
+		echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h
+	@[ -z "$(findstring _small,$@)" ] || \
+		echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h
+	@$(MKCONFIG)  -n $@ -a vct mips mips vct micronas
 
 #########################################################################
 ## MIPS32 AU1X00
@@ -3471,36 +3244,24 @@ ADNPESC1_base_32_config		\
 ADNPESC1_config: unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring _DNPEVA2,$@)" ] || \
-		{ echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... DNP/EVA2 configuration" ; \
-		}
+		echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h
 	@[ -z "$(findstring _base_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'base_32' configuration" ; \
-		}
+		echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h
 	@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
-		}
-	@$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
+		echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a ADNPESC1 nios nios adnpesc1 ssv
 
 DK1C20_safe_32_config		\
 DK1C20_standard_32_config	\
 DK1C20_config:	unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring _safe_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'safe_32' configuration" ; \
-		}
+		echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h
 	@[ -z "$(findstring _standard_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'standard_32' configuration" ; \
-		}
+		echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h
 	@[ -z "$(findstring DK1C20_config,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
-		}
-	@$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
+		echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a DK1C20 nios nios dk1c20 altera
 
 DK1S10_safe_32_config		\
 DK1S10_standard_32_config	\
@@ -3508,22 +3269,14 @@ DK1S10_mtx_ldk_20_config	\
 DK1S10_config:	unconfig
 	@mkdir -p $(obj)include
 	@[ -z "$(findstring _safe_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'safe_32' configuration" ; \
-		}
+		echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h
 	@[ -z "$(findstring _standard_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'standard_32' configuration" ; \
-		}
+		echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h
 	@[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
-		}
+		echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h
 	@[ -z "$(findstring DK1S10_config,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
-		}
-	@$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
+		echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a DK1S10 nios nios dk1s10 altera
 
 #########################################################################
 ## Nios-II
@@ -3590,15 +3343,9 @@ bf527-ezkit-v2_config	: unconfig
 atngw100_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
 
-atstk1002_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-
-atstk1003_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-
-atstk1004_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-
+atstk1002_config	\
+atstk1003_config	\
+atstk1004_config	\
 atstk1006_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
 
@@ -3681,9 +3428,8 @@ sh7785lcr_config  :   unconfig
 		echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x8ff80000" > \
 			$(obj)board/renesas/sh7785lcr/config.tmp ; \
-		  $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
 	fi
-	@$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
+	@$(MKCONFIG) -n $@ -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
 
 ap325rxa_config  :   unconfig
 	@mkdir -p $(obj)include
-- 
1.6.6.1



More information about the U-Boot mailing list