[U-Boot] [PATCH 09/11] at91sam9261ek: make compilable again

[Alexander Stein]

Signed-off-by: Alexander Stein <alexander.stein at systec-electronic.com>
---
 board/atmel/at91sam9261ek/at91sam9261ek.c |    6 +++---
 include/configs/at91sam9261ek.h           |   15 +++++++++++----
 2 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index de5cfae..afe561f 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -246,7 +246,7 @@ int board_init(void)
 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
 #endif
 	/* adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
 	at91_serial_hw_init();
 #ifdef CONFIG_CMD_NAND
@@ -273,8 +273,8 @@ int board_eth_init(bd_t *bis)
 
 int dram_init(void)
 {
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = CONFIG_SYS_SDRAM_SIZE;
 	return 0;
 }
 
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 401478b..05eb15a 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <asm/sizes.h>
+
 #define CONFIG_AT91_LEGACY
 
 /* ARM asynchronous clock */
@@ -39,6 +41,7 @@
 #else
 #define CONFIG_AT91SAM9261	1	/* It's an Atmel AT91SAM9261 SoC*/
 #endif
+#define CONFIG_AT91FAMILY
 #define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
 
@@ -108,8 +111,8 @@
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM			0x20000000
-#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
+#define CONFIG_SYS_SDRAM_BASE			0x20000000
+#define CONFIG_SYS_SDRAM_SIZE			SZ_64M	/* 64 megs */
 
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
@@ -168,7 +171,7 @@
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
-#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END			0x23e00000
 
 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
@@ -230,8 +233,12 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+/* size in bytes reserved for initial data */
+
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_4K \
+					- GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+#define CONFIG_STACKSIZE	(SZ_32K)	/* regular stack */
 
 #ifdef CONFIG_USE_IRQ
 #error CONFIG_USE_IRQ not supported
-- 
1.7.2.2