[U-Boot] [PATCH v2 2/2] avr32: fixup definitions to ATMEL_BASE_xxx

[Reinhard Meyer]

Dear Andreas Bießmann,
> Signed-off-by: Andreas Bießmann <biessmann at corscience.de>

*maybe* your mailing system would abstain from escaping the patch
if you would use "ss" instead "ß" ;)

(I am waiting for the first patch to arrive signed off in 日本語,
or even better, farsi (from right to left). My mailer can handle
that, but can git-am ?)

> ---
> changes since v1:
>  - only rename definitions to ATMEL_BASE_xx schema in this patch
>  - rename of memeory-map.h -> hardweare.h is required before
> 
>  arch/avr32/cpu/at32ap700x/sm.h                    |    4 +-
>  arch/avr32/cpu/hsdramc1.h                         |    4 +-
>  arch/avr32/cpu/hsmc3.h                            |    4 +-
>  arch/avr32/cpu/interrupts.c                       |    2 +-
>  arch/avr32/include/asm/arch-at32ap700x/gpio.h     |   10 ++--
>  arch/avr32/include/asm/arch-at32ap700x/hardware.h |   76 ++++++++++----------
>  arch/avr32/include/asm/arch-at32ap700x/portmux.h  |   10 ++--
>  arch/avr32/include/asm/hmatrix-common.h           |    2 +-
>  board/atmel/atngw100/atngw100.c                   |    4 +-
>  board/atmel/atstk1000/atstk1000.c                 |    4 +-
>  board/earthlcd/favr-32-ezkit/favr-32-ezkit.c      |    2 +-
>  board/mimc/mimc200/mimc200.c                      |    4 +-
>  board/miromico/hammerhead/hammerhead.c            |    2 +-
>  drivers/mmc/atmel_mci.h                           |    4 +-
>  include/configs/atngw100.h                        |    4 +-
>  include/configs/atstk1002.h                       |    6 +-
>  include/configs/atstk1003.h                       |    6 +-
>  include/configs/atstk1004.h                       |    6 +-
>  include/configs/atstk1006.h                       |    6 +-
>  include/configs/favr-32-ezkit.h                   |    6 +-
>  include/configs/hammerhead.h                      |    3 +-
>  include/configs/mimc200.h                         |    4 +-
>  22 files changed, 83 insertions(+), 90 deletions(-)

After hand-fixing the escape sequences,
applied into u-boot-atmel avr32cleanup branch:

> diff --git a/arch/avr32/include/asm/arch-at32ap700x/hardware.h b/arch/avr32/include/asm/arch-at32ap700x/hardware.h
> index 6592c03..9172eef 100644
> --- a/arch/avr32/include/asm/arch-at32ap700x/hardware.h
> +++ b/arch/avr32/include/asm/arch-at32ap700x/hardware.h
> @@ -19,8 +19,8 @@
>   * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>   * MA 02111-1307 USA
>   */
> -#ifndef __AT32AP7000_MEMORY_MAP_H__
> -#define __AT32AP7000_MEMORY_MAP_H__
> +#ifndef __AT32AP7000_HARDWARE_H__
> +#define __AT32AP7000_HARDWARE_H__
>  
>  /* Internal and external memories */
>  #define EBI_SRAM_CS0_BASE			0x00000000
> @@ -43,44 +43,44 @@
>  #define INTERNAL_SRAM_SIZE			0x00008000
>  
>  /* Devices on the High Speed Bus (HSB) */
> -#define LCDC_BASE				0xFF000000
> -#define DMAC_BASE				0xFF200000
> -#define USB_FIFO				0xFF300000
> +#define LCDC_BASE					0xFF000000
> +#define DMAC_BASE					0xFF200000
> +#define USB_FIFO					0xFF300000

ATMEL_BASE_*, ATMEL_SIZE_* for above defines in a later patch, maybe?

Otherwise it looks very good.

Best Regards,
Reinhard