[U-Boot] [PATCH 1/2] PBL: add support for boot from SPI flash.
Shaohui Xie
b21989 at freescale.com
Fri Nov 12 07:36:22 CET 2010
PBL: SPI flash used as RCW and PBI source, CPC1 used as 1M SRAM
where PBL will copy whole U-BOOT image to, U-boot can boot from CPC1
after PBL completes RCW and PBI phases.
To produces the U-boot image which can used by PBL, pbl_image_tool.html
is a necessary tool.
Signed-off-by: Chunhe Lan <b25806 at freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.hu at freescale.com>
Signed-off-by: Shaohui Xie <b21989 at freescale.com>
---
arch/powerpc/cpu/mpc85xx/cpu_init.c | 25 +++++++++++++++++++++++++
board/freescale/corenet_ds/config.mk | 6 ++++++++++
board/freescale/corenet_ds/tlb.c | 9 +++++++++
boards.cfg | 1 +
include/configs/corenet_ds.h | 31 +++++++++++++++++++++++++++++--
5 files changed, 70 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 27236a0..b5a90fb 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -136,6 +136,26 @@ static void enable_cpc(void)
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+ if (in_be32(&cpc->cpccsr0) & CPC_CSR0_CE) {
+ /* find and disable LAW of SRAM */
+ struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR);
+
+ if (law.index == -1) {
+ printf("\nFatal error happened\n");
+ return;
+ } else
+ disable_law(law.index);
+
+#ifdef CONFIG_SYS_P4080_ERRATUM_CPC4
+ /* Disable workaround - only needed in all SRAM mode */
+ clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS);
+#endif
+ out_be32(&cpc->cpccsr0, 0);
+ out_be32(&cpc->cpcsrcr0, 0);
+ }
+#endif
+
for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
u32 cpccfg0 = in_be32(&cpc->cpccfg0);
size += CPC_CFG0_SZ_K(cpccfg0);
@@ -155,6 +175,11 @@ void invalidate_cpc(void)
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+ /* skip CPC1 when it used as all SRAM */
+ if (i == 0)
+ continue;
+#endif
/* Flash invalidate the CPC and clear all the locks */
out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC);
while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC))
diff --git a/board/freescale/corenet_ds/config.mk b/board/freescale/corenet_ds/config.mk
index 15bbf20..ece4578 100644
--- a/board/freescale/corenet_ds/config.mk
+++ b/board/freescale/corenet_ds/config.mk
@@ -24,4 +24,10 @@
# P4080DS board
#
+ifeq ($(CONFIG_PBLSPI), y)
+RESET_VECTOR_ADDRESS = 0xfffffffc
+endif
+
+ifndef RESET_VECTOR_ADDRESS
RESET_VECTOR_ADDRESS = 0xeffffffc
+endif
diff --git a/board/freescale/corenet_ds/tlb.c b/board/freescale/corenet_ds/tlb.c
index 1ae0416..08f91a7 100644
--- a/board/freescale/corenet_ds/tlb.c
+++ b/board/freescale/corenet_ds/tlb.c
@@ -51,9 +51,18 @@ struct fsl_e_tlb_entry tlb_table[] = {
/* TLB 1 */
/* *I*** - Covers boot page */
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+ /* *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
+ * SRAM is at 0xfff00000, it covered the 0xfffff000.
+ * */
+ SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_1M, 1),
+#else
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
+#endif
/* *I*G* - CCSRBAR */
SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
diff --git a/boards.cfg b/boards.cfg
index 6c2a667..562721f 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -195,6 +195,7 @@ P1022DS powerpc mpc85xx p1022ds freescale
P2020DS powerpc mpc85xx p2020ds freescale
stxgp3 powerpc mpc85xx stxgp3 stx
P4080DS powerpc mpc85xx corenet_ds freescale
+P4080DS_PBLSPI powerpc mpc85xx corenet_ds freescale - P4080DS:PBLSPI,SYS_TEXT_BASE=0xFFF80000
sbc8540 powerpc mpc85xx sbc8560 - - SBC8540
sbc8548 powerpc mpc85xx sbc8548 - - sbc8548
sbc8560 powerpc mpc85xx sbc8560 - - sbc8560
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 2ac59e5..df03448 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -28,6 +28,11 @@
#include "../board/freescale/common/ics307_clk.h"
+#ifdef CONFIG_PBLSPI
+#define CONFIG_RAMBOOT_PBLSPI 1
+#define CONFIG_RAMBOOT_TEXT_BASE 0xfff80000
+#endif
+
/* High Level Configuration Options */
#define CONFIG_BOOKE
#define CONFIG_E500 /* BOOKE e500 family */
@@ -58,11 +63,17 @@
#ifdef CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_IS_NOWHERE
#else
-#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#endif
+#if defined(CONFIG_RAMBOOT_PBLSPI)
+#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#endif
+
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */
#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */
@@ -93,6 +104,19 @@
#define CONFIG_PANIC_HANG /* do not reset board on panic */
/*
+ * Config the L3 Cache as L3 SRAM
+ */
+#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
+#else
+#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR
+#endif
+#define CONFIG_SYS_L3_SIZE (1024 << 10)
+#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
+
+
+/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
@@ -185,6 +209,10 @@
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#if defined(CONFIG_RAMBOOT_PBLSPI)
+#define CONFIG_SYS_RAMBOOT
+#endif
+
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
@@ -456,7 +484,6 @@
/*
* Environment
*/
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
--
1.6.4
More information about the U-Boot
mailing list