[U-Boot] [PATCH] FSL_ESDHC: Make the base address configurable at runtime
Marek Vasut
marek.vasut at gmail.com
Sun Nov 14 17:35:30 CET 2010
On Sunday 14 November 2010 17:01:02 Marek Vasut wrote:
> This allows -after reimplementation of board_mmc_init() function- to set up
> the base address of the eSDHC controller at runtime. This is useful on
> iMX515 board I have, where there are two controllers and on different
> revisions of the board, only one of them is used. The board revision can
> be detected on runtime.
Just discussed this with Stefano, I guess this one will be a no-go, nevermind.
>
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
> ---
> arch/arm/cpu/armv7/mx5/soc.c | 2 +-
> arch/powerpc/cpu/mpc83xx/cpu.c | 2 +-
> arch/powerpc/cpu/mpc85xx/cpu.c | 2 +-
> board/freescale/mpc837xemds/mpc837xemds.c | 2 +-
> board/freescale/mpc837xerdb/mpc837xerdb.c | 2 +-
> board/freescale/mpc8569mds/mpc8569mds.c | 2 +-
> drivers/mmc/fsl_esdhc.c | 4 ++--
> include/fsl_esdhc.h | 4 ++--
> 8 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c
> index 7c7a565..4a73491 100644
> --- a/arch/arm/cpu/armv7/mx5/soc.c
> +++ b/arch/arm/cpu/armv7/mx5/soc.c
> @@ -107,7 +107,7 @@ int cpu_eth_init(bd_t *bis)
> int cpu_mmc_init(bd_t *bis)
> {
> #ifdef CONFIG_FSL_ESDHC
> - return fsl_esdhc_mmc_init(bis);
> + return fsl_esdhc_mmc_init(bis, CONFIG_SYS_FSL_ESDHC_ADDR);
> #else
> return 0;
> #endif
> diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c
> b/arch/powerpc/cpu/mpc83xx/cpu.c index 6635109..4739edd 100644
> --- a/arch/powerpc/cpu/mpc83xx/cpu.c
> +++ b/arch/powerpc/cpu/mpc83xx/cpu.c
> @@ -234,7 +234,7 @@ int cpu_eth_init(bd_t *bis)
> int cpu_mmc_init(bd_t *bis)
> {
> #ifdef CONFIG_FSL_ESDHC
> - return fsl_esdhc_mmc_init(bis);
> + return fsl_esdhc_mmc_init(bis, CONFIG_SYS_FSL_ESDHC_ADDR);
> #else
> return 0;
> #endif
> diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c
> b/arch/powerpc/cpu/mpc85xx/cpu.c index fc5d951..7bc9147 100644
> --- a/arch/powerpc/cpu/mpc85xx/cpu.c
> +++ b/arch/powerpc/cpu/mpc85xx/cpu.c
> @@ -269,7 +269,7 @@ reset_85xx_watchdog(void)
> int cpu_mmc_init(bd_t *bis)
> {
> #ifdef CONFIG_FSL_ESDHC
> - return fsl_esdhc_mmc_init(bis);
> + return fsl_esdhc_mmc_init(bis, CONFIG_SYS_FSL_ESDHC_ADDR);
> #else
> return 0;
> #endif
> diff --git a/board/freescale/mpc837xemds/mpc837xemds.c
> b/board/freescale/mpc837xemds/mpc837xemds.c index 51dd692..41dce43 100644
> --- a/board/freescale/mpc837xemds/mpc837xemds.c
> +++ b/board/freescale/mpc837xemds/mpc837xemds.c
> @@ -79,7 +79,7 @@ int board_mmc_init(bd_t *bd)
> clrsetbits_be32(&im->sysconf.sicrh, SICRH_GPIO2_E | SICRH_SPI,
> SICRH_GPIO2_E_SD | SICRH_SPI_SD);
>
> - return fsl_esdhc_mmc_init(bd);
> + return fsl_esdhc_mmc_init(bd, CONFIG_SYS_FSL_ESDHC_ADDR);
> }
> #endif
>
> diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c
> b/board/freescale/mpc837xerdb/mpc837xerdb.c index d636796..8c3cf7b 100644
> --- a/board/freescale/mpc837xerdb/mpc837xerdb.c
> +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c
> @@ -179,7 +179,7 @@ int board_mmc_init(bd_t *bd)
> clrsetbits_be32(&im->sysconf.sicrl, SICRL_USB_B, SICRL_USB_B_SD);
> clrsetbits_be32(&im->sysconf.sicrh, SICRH_SPI, SICRH_SPI_SD);
>
> - return fsl_esdhc_mmc_init(bd);
> + return fsl_esdhc_mmc_init(bd, CONFIG_SYS_FSL_ESDHC_ADDR);
> }
> #endif
>
> diff --git a/board/freescale/mpc8569mds/mpc8569mds.c
> b/board/freescale/mpc8569mds/mpc8569mds.c index 743e712..31e8f1f 100644
> --- a/board/freescale/mpc8569mds/mpc8569mds.c
> +++ b/board/freescale/mpc8569mds/mpc8569mds.c
> @@ -485,7 +485,7 @@ int board_mmc_init(bd_t *bd)
> /* Mux I2C2 (and optionally UART0) signals to eSDHC. */
> setbits_8(&bcsr[6], bcsr6);
>
> - return fsl_esdhc_mmc_init(bd);
> + return fsl_esdhc_mmc_init(bd, CONFIG_SYS_FSL_ESDHC_ADDR);
> }
>
> static void fdt_board_fixup_esdhc(void *blob, bd_t *bd)
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index a368fe6..a078bce 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -484,13 +484,13 @@ int fsl_esdhc_initialize(bd_t *bis, struct
> fsl_esdhc_cfg *cfg) return 0;
> }
>
> -int fsl_esdhc_mmc_init(bd_t *bis)
> +int fsl_esdhc_mmc_init(bd_t *bis, uint32_t base)
> {
> struct fsl_esdhc_cfg *cfg;
>
> cfg = malloc(sizeof(struct fsl_esdhc_cfg));
> memset(cfg, 0, sizeof(struct fsl_esdhc_cfg));
> - cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
> + cfg->esdhc_base = base;
> return fsl_esdhc_initialize(bis, cfg);
> }
>
> diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
> index 477bbd7..e78d25c 100644
> --- a/include/fsl_esdhc.h
> +++ b/include/fsl_esdhc.h
> @@ -173,11 +173,11 @@ struct fsl_esdhc_cfg {
> #endif
>
> #ifdef CONFIG_FSL_ESDHC
> -int fsl_esdhc_mmc_init(bd_t *bis);
> +int fsl_esdhc_mmc_init(bd_t *bis, uint32_t base);
> int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg);
> void fdt_fixup_esdhc(void *blob, bd_t *bd);
> #else
> -static inline int fsl_esdhc_mmc_init(bd_t *bis) { return -ENOSYS; }
> +static inline int fsl_esdhc_mmc_init(bd_t *bis, uint32_t base) { return
> -ENOSYS; } static inline void fdt_fixup_esdhc(void *blob, bd_t *bd) {}
> #endif /* CONFIG_FSL_ESDHC */
More information about the U-Boot
mailing list