[U-Boot] Pull request: u-boot-arm
Wolfgang Denk
wd at denx.de
Wed Nov 17 20:50:29 CET 2010
The following changes since commit d963e84c92a63b4e6c4f2f80482a5ecbe9b24fe0:
Merge branch 'master' of /home/wd/git/u-boot/master (2010-11-12 22:24:06 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Alagu Sankar (1):
mmc: Add multi-block read support to the generic mmc driver
Albert Aribaud (2):
ARM: fix linker file for newer ld support
tx25: fix linker file for newer ld support
Enric Balletbo i Serra (2):
ARMV7: OMAP3: Use generic mmc driver on IGEP v2
ARMV7: OMAP3: Use generic mmc driver on OMAP3 IGEP module
Heiko Schocher (1):
armv7, beagle: Second SDRAM bank don;t work
Koen Kooi (1):
ARMV7: OMAP3: Add expansion board detection for Beagle
Reinhard Meyer (2):
AT91: add 2nd SPI to 9260/9XE/9G20
AT91: add header file for the Shutdown Controller
Sanjeev Premi (3):
omap3evm: Support relocation
omap3evm: Wrap function under CONFIG_USB_OMAP3
omap3evm: Fix mechanism to identify board revision
Steve Sakoman (5):
ARMV7: OMAP3: IGEP: Rename TEXT_BASE
ARMV7: Fix build for non-OMAP3 boards
ARMV7: OMAP3: Add expansion board detection for Overo
ARMV7: OMAP: Fix build after introduction of GENERATED_GBL_DATA_SIZE
mmc: Clean up generic mmc driver multi-block write functions
Wolfgang Denk (2):
Merge branch 'at91' of git://git.denx.de/u-boot-atmel
Merge branch 'master' of git://git.denx.de/u-boot-ti
arch/arm/cpu/arm1136/start.S | 16 ---
arch/arm/cpu/arm1136/u-boot.lds | 38 ++++---
arch/arm/cpu/arm1176/u-boot.lds | 37 +++----
arch/arm/cpu/arm926ejs/u-boot.lds | 30 +++--
arch/arm/cpu/armv7/omap3/sdrc.c | 7 ++
arch/arm/cpu/armv7/start.S | 24 ----
arch/arm/cpu/armv7/u-boot.lds | 46 +++++----
arch/arm/cpu/pxa/u-boot.lds | 35 ++++--
arch/arm/include/asm/arch-at91/at91_shdwn.h | 38 +++++++
arch/arm/include/asm/arch-at91/at91sam9260.h | 1 +
arch/arm/include/asm/arch-at91/hardware.h | 1 +
arch/arm/include/asm/arch-at91/memory-map.h | 1 +
arch/arm/lib/cache.c | 2 +-
board/isee/igep0020/config.mk | 2 +-
board/isee/igep0020/igep0020.c | 9 ++
board/isee/igep0030/config.mk | 3 +-
board/isee/igep0030/igep0030.c | 9 ++
board/overo/overo.c | 115 ++++++++++++++++++++
board/overo/overo.h | 4 +
board/ti/beagle/beagle.c | 95 ++++++++++++++++
board/ti/beagle/beagle.h | 46 ++++++++-
board/ti/evm/config.mk | 2 +-
board/ti/evm/evm.c | 24 ++++-
board/ti/evm/evm.h | 2 +
drivers/mmc/mmc.c | 148 +++++++++----------------
include/configs/igep0020.h | 9 ++-
include/configs/igep0030.h | 9 ++-
include/configs/omap3_beagle.h | 8 +-
include/configs/omap3_evm.h | 11 ++
include/configs/omap3_overo.h | 7 +-
include/configs/omap4_panda.h | 6 +-
include/configs/omap4_sdp4430.h | 6 +-
nand_spl/board/karo/tx25/u-boot.lds | 40 ++++----
33 files changed, 576 insertions(+), 255 deletions(-)
create mode 100644 arch/arm/include/asm/arch-at91/at91_shdwn.h
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
######## This message was made from 100% recycled electrons. ########
More information about the U-Boot
mailing list