[U-Boot] Force setting of ethact

[Mike Frysinger]

On Thursday, November 18, 2010 08:15:43 DUNDA Matthias wrote:
> Hi all-

please fix your e-mailer.  it needs to wrap long lines.

> I've been struggeling with the ethact setting in U-Boot: I want U-Boot to
> load from eTSEC0 on our board, but it always comes up with ethact = UEC0
> or FSL UEC0 in older versions.
> 
> As ethact is not persistent, my only workaround so far was to change
> net/eth.c so that at all occasions, where ethact is set, it is set to
> eTSEC0 - during development, this was OK for me, but now I am cleaning up!
> 
> What's the intended/desired function of ethact, and how should it be
> initialized? Even using CONFIG_ETHPRIME has no effect.

ethprime should do this.  you'll need to describe what version of u-boot 
you're actually using and why ethprime isnt working for you.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20101118/16846b5e/attachment.pgp