[U-Boot] [PATCH 1/2] net: fix some bugs in LL TEMAC driver

Stephan Linz linz at li-pro.net
Fri Nov 19 19:54:08 CET 2010


  * avoid using link variable uninitialized
  * avoid using phy_addr variable with invalid value
  * reorganize phy control: first looking for phy than link
  * return with error (result value -1) if no phy/link was found
  * fix boolean mistake in wait for link: wait as long as we got
    phy register 1 has no link indication (BMSR != 0x24)
  * expand the 'first run' flag handling in ll_temac_init() in
    respect to possible error detection in xps_ll_temac_phy_ctrl()

Signed-off-by: Stephan Linz <linz at li-pro.net>
---
 drivers/net/xilinx_ll_temac.c |   44 ++++++++++++++++++++++++++++++----------
 1 files changed, 33 insertions(+), 11 deletions(-)

diff --git a/drivers/net/xilinx_ll_temac.c b/drivers/net/xilinx_ll_temac.c
index 72a1632..a72e072 100644
--- a/drivers/net/xilinx_ll_temac.c
+++ b/drivers/net/xilinx_ll_temac.c
@@ -225,24 +225,21 @@ static void read_phy_reg (struct eth_device *dev, int phy_addr)
 #endif
 
 static int phy_addr = -1;
-static int link;
+static int link = 0;
 
 /* setting ll_temac and phy to proper setting */
 static int xps_ll_temac_phy_ctrl(struct eth_device *dev)
 {
-	int i;
+	int i, retries;
 	unsigned int result;
-	unsigned retries = 10;
 
+	 /* link is setup */
 	if (link == 1)
-		return 1; /* link is setup */
-
-	/* wait for link up */
-	while (retries-- &&
-		((xps_ll_temac_hostif_get(dev, 0, phy_addr, 1) & 0x24) == 0x24))
-		;
+		return 1;
 
+	/* try out if have ever found the right phy? */
 	if (phy_addr == -1) {
+		printf("Looking for phy ... ");
 		for (i = 31; i >= 0; i--) {
 			result = xps_ll_temac_hostif_get(dev, 0, i, 1);
 			if ((result & 0x0ffff) != 0x0ffff) {
@@ -251,7 +248,27 @@ static int xps_ll_temac_phy_ctrl(struct eth_device *dev)
 				break;
 			}
 		}
+
+		/* no success? -- wery bad */
+		if (phy_addr == -1) {
+			printf("ERROR\n");
+			return -1;
+		}
+		printf("OK\n");
+	}
+
+	/* wait for link up */
+	printf("Waiting for link ... ");
+	retries = 10;
+	while (retries-- &&
+		((xps_ll_temac_hostif_get(dev, 0, phy_addr, 1) & 0x24) != 0x24))
+		;
+
+	if (retries < 0) {
+		printf("ERROR\n");
+		return 0;
 	}
+	printf("OK\n");
 
 	/* get PHY id */
 	i = (xps_ll_temac_hostif_get(dev, 0, phy_addr, 2) << 16) | \
@@ -491,7 +508,6 @@ static int ll_temac_init(struct eth_device *dev, bd_t *bis)
 #endif
 	if (!first)
 		return 0;
-	first = 0;
 
 	xps_ll_temac_init(dev, bis);
 
@@ -502,7 +518,13 @@ static int ll_temac_init(struct eth_device *dev, bd_t *bis)
 	for (i = 0; i < 32; i++)
 		read_phy_reg(dev, i);
 #endif
-	xps_ll_temac_phy_ctrl(dev);
+
+	if (xps_ll_temac_phy_ctrl(dev) == 0) {
+		xps_ll_temac_halt(dev);
+		return -1;
+	}
+
+	first = 0;
 	return 1;
 }
 
-- 
1.6.0.4



More information about the U-Boot mailing list