[U-Boot] [PATCH] ppc4xx: Remove bogus comment from start.S

[Stefan Roese]

Signed-off-by: Stefan Roese <sr at denx.de>
---
 arch/powerpc/cpu/ppc4xx/start.S |   17 +++--------------
 1 files changed, 3 insertions(+), 14 deletions(-)

diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
index 65195f5..c36c13b 100644
--- a/arch/powerpc/cpu/ppc4xx/start.S
+++ b/arch/powerpc/cpu/ppc4xx/start.S
@@ -48,21 +48,10 @@
  *-------------------------------------------------------------------------------
  */
 
-/*  U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
- *
- *
- *  The processor starts at 0xfffffffc and the code is executed
- *  from flash/rom.
- *  in memory, but as long we don't jump around before relocating.
- *  board_init lies at a quite high address and when the cpu has
- *  jumped there, everything is ok.
- *  This works because the cpu gives the FLASH (CS0) the whole
- *  address space at startup, and board_init lies as a echo of
- *  the flash somewhere up there in the memorymap.
- *
- *  board_init will change CS0 to be positioned at the correct
- *  address and (s)dram will be positioned at address 0
+/*
+ * Startup code for IBM/AMCC PowerPC 4xx (PPC4xx) based boards
  */
+
 #include <asm-offsets.h>
 #include <config.h>
 #include <asm/ppc4xx.h>
-- 
1.7.3.2