[U-Boot] About "sf probe" command

[Mike Frysinger]

On Tuesday, November 23, 2010 23:46:53 wzc0066 wrote:
> Hello, i feel confused about the parameter of "sf probe" command.
> Such as "sf  probe 0" or "sf  probe 1"
> 
> I have a 4M SPI Flash on my board, how should i specify the parameter of
> "sf probe" ?
> And what means of these parameters ?  ( the help info of this command is
> too small which displayed in u-boot console )

so read the source.  it is clearly cropped to below 80 cols, so if your 
console is smaller than that, fix your console.

the help is pretty obvious to me:
	sf probe <cs>

the # is the SPI chip select.  only you know how you have the SPI flash 
connected on your board.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20101124/cf5ae3c7/attachment.pgp