[U-Boot] [PATCH] sh: serial_sh: Fix build in serial_sh

Nobuhiro Iwamatsu nobuhiro.iwamatsu.yj at renesas.com
Thu Nov 25 03:11:40 CET 2010


The serial of ap325rxa has it of two kinds, and the setting of
the clock is different.
Because there was a problem by function to judge serial kind,
this revised it.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj at renesas.com>
---
 drivers/serial/serial_sh.h |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
index 54e94e5..e19593c 100644
--- a/drivers/serial/serial_sh.h
+++ b/drivers/serial/serial_sh.h
@@ -675,14 +675,14 @@ static inline int sci_rxd_in(struct uart_port *port)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
 #elif defined(CONFIG_CPU_SH7723) ||\
 	defined(CONFIG_CPU_SH7724)
-static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
+static inline int scbrr_calc(struct uart_port port, int bps, int clk)
 {
-	if (port->type == PORT_SCIF)
+	if (port.type == PORT_SCIF)
 		return (clk+16*bps)/(32*bps)-1;
 	else
 		return ((clk*2)+16*bps)/(16*bps)-1;
 }
-#define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk)
+#define SCBRR_VALUE(bps, clk) scbrr_calc(sh_sci, bps, clk)
 #elif defined(__H8300H__) || defined(__H8300S__)
 #define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1)
 #else /* Generic SH */
-- 
1.7.2.3



More information about the U-Boot mailing list