[U-Boot] [PATCH] ppc4xx: Flush complete dcache in relocate_code()

[Stefan Roese]

When the cache is enabled in SDRAM we need to flush not only the global
data area but also the bd_info struct in relocate_code. This patch now
flushed the complete dcache (all dcache lines) via flush_dcache() instead
of adding a flush_dcache_range() call for bd_info since this is faster.

Signed-off-by: Stefan Roese <sr at denx.de>
---
 arch/powerpc/cpu/ppc4xx/start.S |   13 +++++++------
 1 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
index d77272c..99822d7 100644
--- a/arch/powerpc/cpu/ppc4xx/start.S
+++ b/arch/powerpc/cpu/ppc4xx/start.S
@@ -1391,8 +1391,8 @@ in32r:
 relocate_code:
 #if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS)
 	/*
-	 * We need to flush the initial global data (gd_t) before the dcache
-	 * will be invalidated.
+	 * We need to flush the initial global data (gd_t) and bd_info
+	 * before the dcache will be invalidated.
 	 */
 
 	/* Save registers */
@@ -1400,10 +1400,11 @@ relocate_code:
 	mr	r10, r4
 	mr	r11, r5
 
-	/* Flush initial global data range */
-	mr	r3, r4
-	addi	r4, r4, GENERATED_GBL_DATA_SIZE at l
-	bl	flush_dcache_range
+	/*
+	 * Flush complete dcache, this is faster than flushing the
+	 * ranges for global_data and bd_info instead.
+	 */
+	bl	flush_dcache
 
 #if defined(CONFIG_SYS_INIT_DCACHE_CS)
 	/*
-- 
1.7.3.2