[U-Boot] [PATCHv2] mpc83xx: Make it boot again

[Joakim Tjernlund]

Kim Phillips <kim.phillips at freescale.com> wrote on 2010/11/28 17:31:25:
>
> On Tue, 23 Nov 2010 12:38:57 -0600
> Scott Wood <scottwood at freescale.com> wrote:
>
> > On Tue, 23 Nov 2010 19:16:01 +0100
> > Joakim Tjernlund <joakim.tjernlund at transmode.se> wrote:
> >
> > > Could we have an ACK before relese please?
> > >
> > > > After the removal of COLD/WARM start flags my mpc8321
> > > > board didn't boot anymore.
> > > > Trial and error suggests that map/remap_flash_by_xxx needs
> > > > to wait after updating LBLAWAR1 to make sure the the change has
> > > > reached the HW before continuing with the code that depends on it.
> > > > Final fix suggested by Scott Wood.
> > > >
> > > > Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund at transmode.se>
> > > > ---
> > > >
> > > >  v2: Final adjustmenst based on inpt from Scott Wood.
> > > >  arch/powerpc/cpu/mpc83xx/start.S |    8 ++++++++
> > > >  1 files changed, 8 insertions(+), 0 deletions(-)
> >
> > ACK
> >
> > -Scott
>
> applied.

BTW, there was one named
   powerpc: fix mpc8315erdb and mpc8313erdb NAND linker script
which I think you should consider. I don't really care as
I don't use these boards, I just noticed it by chance.

 Jocke