[U-Boot] v2010-rc2: OMAP3 broken
Hiremath, Vaibhav
hvaibhav at ti.com
Mon Nov 29 14:23:04 CET 2010
> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> On Behalf Of Hiremath, Vaibhav
> Sent: Monday, November 29, 2010 6:50 PM
> To: Wolfgang Denk; u-boot at lists.denx.de
> Subject: Re: [U-Boot] v2010-rc2: OMAP3 broken
>
>
> > -----Original Message-----
> > From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> > On Behalf Of Wolfgang Denk
> > Sent: Monday, November 29, 2010 6:19 PM
> > To: u-boot at lists.denx.de
> > Subject: [U-Boot] v2010-rc2: OMAP3 broken
> >
> > Hi,
> >
> > it seems that commit 566d49a3f has broken OMAP3 - at least beagle and
> > devkit8000 hang in or after relocation.
> >
> [Hiremath, Vaibhav] AM3517 also used to hangs in relocate_code function.
>
>
>
> > The culprit is this the "$(sort $(LIBS)) in Makefile, i. e. the
> > following change will unbreak the boards:
> >
> > @@ -263,7 +263,7 @@ ifeq ($(SOC),s5pc2xx)
> > LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
> > endif
> >
> > -LIBS := $(addprefix $(obj),$(sort $(LIBS)))
> > +LIBS := $(addprefix $(obj),$(LIBS))
> > .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
> >
> > LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o
> >
> >
> [Hiremath, Vaibhav] The above patch works for me as well.
>
> > Unfortunately we need the sort to avoild duplicate listing of libs /
> > objects on PowerPC. And I don;t understand yet how this change can
> > cause such an affect.
> >
> > Any help welcome.
> >
> [Hiremath, Vaibhav] I can put my debug observations here,
>
>
> The system is hanging at
>
> fixrel:
> /* relative fix: increase location by offset */
> ldr r1, [r0]
>
[Hiremath, Vaibhav] pasting error, the actual place is
fixnext:
str r1, [r0]
Thanks,
Vaibhav
> Here the value of r0 is relocation offset and not an address.
>
> fixloop:
> ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
> add r0, r0, r9 /* r0 <- location to fix up in RAM */
>
> In the above two instructions, load from [r2] is coming as 0, causing
> reference to invalid address (relocation offset).
>
> After applying your patch, the value from above load instruction comes as
> 0x80008020, which further gets added to offset (valid address).
>
>
> I hope this might give you some pointers, and I am not an expert on
> makefile, so not sure about relation between library sort and above
> finding.
>
> Thanks,
> Vaibhav
> > Best regards,
> >
> > Wolfgang Denk
> >
> > --
> > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> > It seems intuitively obvious to me, which means that it might be
> > wrong. -- Chris Torek
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
More information about the U-Boot
mailing list