[U-Boot] [PATCH v2 0/4] get at91rm9200ek working with ARM relocation

[Reinhard Meyer]

Dear Andreas Bießmann,
> Dear all,
>
> this is mostly a copy of
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/89888
>
> This series have two relevant changes. Cause of defining the weak symbol
> board_reset the previous patch 'arm920t: fix linker skript for -pie linking'
> is not longer needed. So 'arm920t/at91/reset: board_reset: define weak symbol'
> is a replacement for that one.
> And second integrate the suggestion of Reinhard Meyer in
> 'arm920t/at91/timer: replace bss variables by gd'.
>
> Andreas Bießmann (4):
>    at91rm9200ek: add configure target for RAM boot
>    MAKEALL: fix AT91
>    arm920t/at91/reset: board_reset: define weak symbol
>    arm920t/at91/timer: replace bss variables by gd
>
>   MAKEALL                            |   18 +++---------------
>   arch/arm/cpu/arm920t/at91/reset.c  |    8 +++++---
>   arch/arm/cpu/arm920t/at91/timer.c  |   29 ++++++++++++++---------------
>   arch/arm/include/asm/global_data.h |    1 +
>   board/atmel/at91rm9200ek/config.mk |    2 --
>   boards.cfg                         |    3 ++-
>   include/configs/at91rm9200ek.h     |   16 ++++++++++++++++
>   7 files changed, 41 insertions(+), 36 deletions(-)
>   delete mode 100644 board/atmel/at91rm9200ek/config.mk

Does that base on current u-boot/master?
I will pull current master, and rebase at91,at91-next on it, also delete the then
obsolete two patches currently at at91. Then your patches will be applied.

Best Regards,
Reinhard