[U-Boot] [RFC] [PATCH V2] arm: arm926ejs: use ELF relocations

Reinhard Meyer u-boot at emk-elektronik.de
Tue Oct 5 09:23:01 CEST 2010


Dear Wolfgang Denk, dear Albert Aribaud,
> 
> Initial Test reports:
> 
> File Size with Heiko's patch: 244k
> U-Boot works.
> 
> File size with Albert's V2 patch: 255k
> U-Boot stops at:
> U-Boot 2010.09-00113-g3c5eeb8-dirty (Oct 05 2010 - 10:04:25)
> 
> CPU: AT91SAM9XE
> Crystal frequency:   18.432 MHz
> CPU clock        :  198.656 MHz
> Master clock     :   99.328 MHz
> I2C:   ready
> DRAM:  64 MiB
> <dead here>
> 
> File size with Wolfgang's patch: 244k (strange!)
<brown paper bag>
Sorry, I did not look close enough to see that Wolfgang's
Patch does not add anything for ARM926!
</brown paper bag>

Remains the fact that Albert's V2 dies after printing the DRAM -
that is probably during relocation :)

> I only added #define CONFIG_RELOC_FIXUP_WORKS to my board config
> (compared to the Heiko-version).
> Did I miss to change anything else.
 
Best Regards,
Reinhard




More information about the U-Boot mailing list