[U-Boot] [PATCH] Crash in env_relocate_spec() of env_mmc.c

Steve Sakoman sakoman at gmail.com
Fri Oct 8 15:39:37 CEST 2010


On Fri, Oct 8, 2010 at 1:03 AM, Stefano Babic <sbabic at denx.de> wrote:
> mmc_initialize is not called at the startup if the
> relocation takes place and the environment is stored
> into a MMC card.
>
> Signed-off-by: Stefano Babic <sbabic at denx.de>
> ---
>  arch/arm/lib/board.c |   10 +++++-----
>  common/env_mmc.c     |   11 +++++------
>  2 files changed, 10 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
> index 5f2dfd0..704ddcb 100644
> --- a/arch/arm/lib/board.c
> +++ b/arch/arm/lib/board.c
> @@ -775,6 +775,11 @@ void board_init_r (gd_t *id, ulong dest_addr)
>        nand_init();            /* go init the NAND */
>  #endif
>
> +#ifdef CONFIG_GENERIC_MMC
> +       puts ("MMC:   ");
> +       mmc_initialize (bd);
> +#endif
> +
>  #if defined(CONFIG_CMD_ONENAND)
>        onenand_init();
>  #endif
> @@ -854,11 +859,6 @@ extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
>        board_late_init ();
>  #endif
>
> -#ifdef CONFIG_GENERIC_MMC
> -       puts ("MMC:   ");
> -       mmc_initialize (gd->bd);
> -#endif
> -
>  #ifdef CONFIG_BITBANGMII
>        bb_miiphy_init();
>  #endif

I think it might make more sense to put the MMC ifdef after the
onenand code so that it doesn't split the nand/onenand grouping.
Otherwise it matches what I did.

> diff --git a/common/env_mmc.c b/common/env_mmc.c
> index 14203b6..cb7c448 100644
> --- a/common/env_mmc.c
> +++ b/common/env_mmc.c
> @@ -130,24 +130,23 @@ void env_relocate_spec(void)
>  {
>  #if !defined(ENV_IS_EMBEDDED)
>        struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
> +       char buf[CONFIG_ENV_SIZE];
>
>        if (init_mmc_for_env(mmc))
>                return;
>
> -       if (read_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, env_ptr))
> -               return use_default();
> -
> -       if (crc32(0, env_ptr->data, ENV_SIZE) != env_ptr->crc)
> +       if (read_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, buf))
>                return use_default();

This is a void function and shouldn't have a return value.  I fixed
this in my version.

>
>        gd->env_valid = 1;

I removed this in my version, probably an error to do that though :-)

> +
> +       env_import(buf, 1);
>  #endif
>  }
>
>  #if !defined(ENV_IS_EMBEDDED)
>  static void use_default()
>  {
> -       puts ("*** Warning - bad CRC or MMC, using default environment\n\n");
> -       set_default_env();
> +       set_default_env("*** Warning - bad CRC or MMC, using default environment\n\n");

I previously submitted a patch to fix this and Wolfgang sent an email
saying that it had been applied.

>  }
>  #endif
> --
> 1.6.3.3
>
>

I'll revise my patch to add the missing gd->env_valid = 1; and re-test.

Steve


More information about the U-Boot mailing list