[U-Boot] [GIT PULL] Pull request: u-boot-imx

[Wolfgang Denk]

Dear Stefano Babic,

In message <4CAD8492.3000702 at denx.de> you wrote:
> Hi Wolfgang,
> 
> please pull from u-boot-imx.
> 
> The following changes since commit 2e6e1772c0e34871769be4aef79748fe3e47d953:
>   Wolfgang Denk (1):
>         Merge branch 'next' of /home/wd/git/u-boot/next
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-imx master
> 
> Stefano Babic (10):
>       Use common function to set GPIOs for MX3 and MX5
>       ARM: Use syslib functions for all CORTEXA8
>       MX51: Added pins definition to set up pads
>       MX51: add structure to access System Reset Controller
>       MXC: Add watchdog support to serial driver
>       MX51: Drop unused header file for mx51evk
>       MXC: Correct SPI_CPOL setting in SPI driver
>       MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51
>       MX51: Register definitions cannot be included in board config file
>       MX51: Support for TTECH vision2 board
> 
>  MAINTAINERS                                        |    1 +
>  arch/arm/cpu/armv7/Makefile                        |    3 +-
>  arch/arm/cpu/armv7/omap-common/Makefile            |    1 -
>  arch/arm/cpu/armv7/{omap-common => }/syslib.c      |    0
>  arch/arm/include/asm/arch-mx31/mx31-regs.h         |   14 +-
>  arch/arm/include/asm/arch-mx31/mx31.h              |   25 -
>  arch/arm/include/asm/arch-mx51/imx-regs.h          |   26 +-
>  arch/arm/include/asm/arch-mx51/mx51_pins.h         |   44 ++
>  arch/arm/include/asm/arch-mx51/sys_proto.h         |    1 +
>  board/davedenx/qong/qong.c                         |   29 +-
>  board/freescale/mx51evk/mx51evk.c                  |    2 -
>  board/ttcontrol/vision2/Makefile                   |   48 ++
>  board/ttcontrol/vision2/config.mk                  |   25 +
>  board/ttcontrol/vision2/imximage_hynix.cfg         |  209 ++++++
>  board/ttcontrol/vision2/vision2.c                  |  711
> ++++++++++++++++++++
>  boards.cfg                                         |    1 +
>  drivers/gpio/Makefile                              |    2 +-
>  drivers/gpio/{mx31_gpio.c => mxc_gpio.c}           |   47 +-
>  drivers/misc/fsl_pmic.c                            |   10 +-
>  drivers/serial/serial_mxc.c                        |    7 +-
>  drivers/spi/mxc_spi.c                              |  168 ++++--
>  include/configs/imx31_litekit.h                    |    4 +-
>  include/configs/imx31_phycore.h                    |    2 +-
>  include/configs/mx31ads.h                          |    4 +-
>  include/configs/mx31pdk.h                          |    4 +-
>  include/configs/mx51evk.h                          |    2 +-
>  include/configs/qong.h                             |    6 +-
>  include/configs/vision2.h                          |  214 ++++++
>  include/mc13892.h                                  |    3 +
>  .../mx51evk/mx51evk.h => include/mxc_gpio.h        |   50 +-
>  30 files changed, 1510 insertions(+), 153 deletions(-)
>  rename arch/arm/cpu/armv7/{omap-common => }/syslib.c (100%)
>  create mode 100644 board/ttcontrol/vision2/Makefile
>  create mode 100644 board/ttcontrol/vision2/config.mk
>  create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg
>  create mode 100644 board/ttcontrol/vision2/vision2.c
>  rename drivers/gpio/{mx31_gpio.c => mxc_gpio.c} (63%)
>  create mode 100644 include/configs/vision2.h
>  rename board/freescale/mx51evk/mx51evk.h => include/mxc_gpio.h (54%)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Though a program be but three lines long,
someday it will have to be maintained."
- The Tao of Programming