[U-Boot] [PATCH 1/3] Build: Add "board options" column to boards.cfg

Wolfgang Denk wd at denx.de
Mon Oct 11 11:45:08 CEST 2010


From: Marek Vasut <marek.vasut at gmail.com>

There are some boards where it's currently not possible to detect all
board information at runtime, therefore a new column was added to
boards.cfg .

This column can contain multiple options: a board configuration name,
optionally followed by a colon (':') and a list of options, which are
separated by comma (',').

In case of simple options like '256M_U_BOOT', these expand to
"#define CONFIG_MK_256M_U_BOOT 1" in config.h . In case of
assignments like 'RAM=8192', these expand to "#define CONFIG_MK_RAM
8192" in config.h .

Example:

	FOO:HAS_BAR,BAZ=64

means:
	- the name of the board config file is include/configs/FOO.h
	- the generated file include/config.h will contain these
	  lines:

		#define CONFIG_HAS_BAR  1
		#define CONFIG_BAZ  64

Signed-off-by: Marek Vasut <marek.vasut at gmail.com>

[wd at denx.de: edited commit message; added code to deal with an
optional board configuration name]

Signed-off-by: Wolfgang Denk <wd at denx.de>
---
 boards.cfg |    4 ++--
 mkconfig   |   34 +++++++++++++++++++++++++++++-----
 2 files changed, 31 insertions(+), 7 deletions(-)

diff --git a/boards.cfg b/boards.cfg
index 91d75d3..1f44525 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -17,8 +17,8 @@
 #
 #	:.,$! sort -f -k2,2 -k3,3 -k6,6 -k5,5 -k1,1
 #
-# Target	ARCH	CPU		Board name	Vendor		SoC
-###########################################################################
+# Target	ARCH	CPU		Board name	Vendor		SoC		Options
+###############################################################################################
 
 qong		arm	arm1136		-		davedenx	mx31
 mx31ads		arm	arm1136		-		freescale	mx31
diff --git a/mkconfig b/mkconfig
index b661071..f3054ce 100755
--- a/mkconfig
+++ b/mkconfig
@@ -5,7 +5,7 @@
 #
 # Parameters:  Target  Architecture  CPU  Board [VENDOR] [SOC]
 #
-# (C) 2002-2006 DENX Software Engineering, Wolfgang Denk <wd at denx.de>
+# (C) 2002-2010 DENX Software Engineering, Wolfgang Denk <wd at denx.de>
 #
 
 APPEND=no	# Default: Create new config file
@@ -17,6 +17,7 @@ cpu=""
 board=""
 vendor=""
 soc=""
+options=""
 
 if [ \( $# -eq 2 \) -a \( "$1" = "-A" \) ] ; then
 	# Automatic mode
@@ -41,11 +42,12 @@ while [ $# -gt 0 ] ; do
 done
 
 [ $# -lt 4 ] && exit 1
-[ $# -gt 6 ] && exit 1
+[ $# -gt 7 ] && exit 1
 
+# Strip all options and/or _config suffixes
 CONFIG_NAME="${1%_config}"
 
-[ "${BOARD_NAME}" ] || BOARD_NAME="${CONFIG_NAME}"
+[ "${BOARD_NAME}" ] || BOARD_NAME="${1%_config}"
 
 arch="$2"
 cpu="$3"
@@ -56,13 +58,34 @@ else
 fi
 [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
 [ $# -gt 5 ] && [ "$6" != "-" ] && soc="$6"
+[ $# -gt 6 ] && [ "$7" != "-" ] && {
+	# check if we have a board config name in the options field
+	# the options field mave have a board config name and a list
+	# of options, both separated by a colon (':'); the options are
+	# separated by commas (',').
+	#
+	# Check for board name
+	tmp="${7%:*}"
+	if [ "$tmp" ] ; then
+		CONFIG_NAME="$tmp"
+	fi
+	# Check if we only have a colon...
+	if [ "${tmp}" != "$7" ] ; then
+		options=${7#*:}
+		TARGETS="`echo ${options} | sed 's:,: :g'` ${TARGETS}"
+	fi
+}
 
 if [ "${ARCH}" -a "${ARCH}" != "${arch}" ]; then
 	echo "Failed: \$ARCH=${ARCH}, should be '${arch}' for ${BOARD_NAME}" 1>&2
 	exit 1
 fi
 
-echo "Configuring for ${BOARD_NAME} board..."
+if [ "$options" ] ; then
+	echo "Configuring for ${BOARD_NAME} - Board: ${CONFIG_NAME}, Options: ${options}"
+else
+	echo "Configuring for ${BOARD_NAME} board..."
+fi
 
 #
 # Create link to architecture specific headers
@@ -126,7 +149,8 @@ fi
 echo "/* Automatically generated - do not edit */" >>config.h
 
 for i in ${TARGETS} ; do
-	echo "#define CONFIG_MK_${i} 1" >>config.h ;
+	i="`echo ${i} | sed '/=/ {s/=/\t/;q } ; { s/$/\t1/ }'`"
+	echo "#define CONFIG_MK_${i}" >>config.h ;
 done
 
 cat << EOF >> config.h
-- 
1.7.2.3



More information about the U-Boot mailing list