[U-Boot] [PATCH] ppc4xx: Enable NOR flash support in sequoia_ramboot target
Stefan Roese
sr at denx.de
Mon Oct 11 15:50:10 CEST 2010
Until now, the Sequoia RAM-booting image disabled NOR flash support
as this image was mainly created for NAND-only boards. This patch
now enables NOR flash support for this RAM-booting version as well.
Signed-off-by: Stefan Roese <sr at denx.de>
---
board/amcc/sequoia/sequoia.c | 6 ++++--
include/configs/amcc-common.h | 11 -----------
2 files changed, 4 insertions(+), 13 deletions(-)
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index c523bca..b518aa7 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -155,7 +155,8 @@ int misc_init_r(void)
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
gd->bd->bi_flashoffset = 0;
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
+ defined(CONFIG_SYS_RAMBOOT)
mtdcr(EBC0_CFGADDR, PB3CR);
#else
mtdcr(EBC0_CFGADDR, PB0CR);
@@ -163,7 +164,8 @@ int misc_init_r(void)
pbcr = mfdcr(EBC0_CFGDATA);
size_val = ffs(gd->bd->bi_flashsize) - 21;
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
+ defined(CONFIG_SYS_RAMBOOT)
mtdcr(EBC0_CFGADDR, PB3CR);
#else
mtdcr(EBC0_CFGADDR, PB0CR);
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 9c53d37..3f7eb62 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -81,17 +81,6 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
-#if defined(CONFIG_SYS_RAMBOOT)
-/*
- * Disable NOR FLASH commands on RAM-booting version. One main reason for this
- * RAM-booting version is boards with NAND and without NOR. This image can
- * be used for initial NAND programming.
- */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-#endif
-
/*
* Miscellaneous configurable options
*/
--
1.7.3.1
More information about the U-Boot
mailing list