[U-Boot] [PATCH 1/1] OMAP3: Add support for the OMAP3 IGEP module.

Enric Balletbo i Serra eballetbo at gmail.com
Tue Oct 12 00:23:16 CEST 2010


The IGEP module is a low-power, high performance production-ready
system-on-module (SOM) based on TI's OMAP3 family.The IGEP module
solution based upon TI OMAP3 provides a low-power/low-cost platform
for a variety of consumer/industrial/medical devices.

Signed-off-by: Enric Balletbo i Serra <eballetbo at gmail.com>
---
 MAINTAINERS                    |    1 +
 MAKEALL                        |    1 +
 board/isee/igep0030/Makefile   |   49 +++++++++
 board/isee/igep0030/config.mk  |   34 +++++++
 board/isee/igep0030/igep0030.c |   71 +++++++++++++
 board/isee/igep0030/igep0030.h |  147 +++++++++++++++++++++++++++
 boards.cfg                     |    1 +
 include/configs/igep0030.h     |  215 ++++++++++++++++++++++++++++++++++++++++
 8 files changed, 519 insertions(+), 0 deletions(-)
 create mode 100644 board/isee/igep0030/Makefile
 create mode 100644 board/isee/igep0030/config.mk
 create mode 100644 board/isee/igep0030/igep0030.c
 create mode 100644 board/isee/igep0030/igep0030.h
 create mode 100644 include/configs/igep0030.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 99728ae..5581080 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -821,6 +821,7 @@ Alex Z
 Enric Balletbo i Serra <eballetbo at iseebcn.com>
 
 	igep0020	ARM ARMV7 (OMAP3xx SoC)
+	igep0030	ARM ARMV7 (OMAP3xx SoC)
 
 -------------------------------------------------------------------------
 
diff --git a/MAKEALL b/MAKEALL
index 78dce8b..a241181 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -491,6 +491,7 @@ LIST_ARMV7="		\
 	am3517_evm		\
 	devkit8000		\
 	igep0020		\
+	igep0030		\
 	mx51evk			\
 	omap3_beagle		\
 	omap3_overo		\
diff --git a/board/isee/igep0030/Makefile b/board/isee/igep0030/Makefile
new file mode 100644
index 0000000..cfc0411
--- /dev/null
+++ b/board/isee/igep0030/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= igep0030.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/isee/igep0030/config.mk b/board/isee/igep0030/config.mk
new file mode 100644
index 0000000..35865e0
--- /dev/null
+++ b/board/isee/igep0030/config.mk
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2009
+# ISEE 2007 SL, <www.iseebcn.com>
+#
+# IGEP0030 uses OMAP3 (ARM-CortexA8) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80008000
+
diff --git a/board/isee/igep0030/igep0030.c b/board/isee/igep0030/igep0030.c
new file mode 100644
index 0000000..9244259
--- /dev/null
+++ b/board/isee/igep0030/igep0030.c
@@ -0,0 +1,71 @@
+/*
+ * (C) Copyright 2010
+ * ISEE 2007 SL, <www.iseebcn.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <twl4030.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+#include "igep0030.h"
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+	/* board id for Linux */
+	gd->bd->bi_arch_number = MACH_TYPE_IGEP0030;
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	return 0;
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts
+ */
+int misc_init_r(void)
+{
+	twl4030_power_init();
+
+	dieid_num_r();
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_DEFAULT();
+}
diff --git a/board/isee/igep0030/igep0030.h b/board/isee/igep0030/igep0030.h
new file mode 100644
index 0000000..b7ce5aa
--- /dev/null
+++ b/board/isee/igep0030/igep0030.h
@@ -0,0 +1,147 @@
+/*
+ * (C) Copyright 2010
+ * ISEE 2007 SL, <www.iseebcn.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _IGEP0030_H_
+#define _IGEP0030_H_
+
+const omap3_sysinfo sysinfo = {
+	DDR_STACKED,
+	"OMAP3 IGEP module",
+	"ONENAND",
+};
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN   - Pull type selection is active
+ * M0   - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+
+#define MUX_DEFAULT()\
+	MUX_VAL(CP(SDRC_D0),        (IEN  | PTD | DIS | M0)) /* SDRC_D0 */\
+	MUX_VAL(CP(SDRC_D1),        (IEN  | PTD | DIS | M0)) /* SDRC_D1 */\
+	MUX_VAL(CP(SDRC_D2),        (IEN  | PTD | DIS | M0)) /* SDRC_D2 */\
+	MUX_VAL(CP(SDRC_D3),        (IEN  | PTD | DIS | M0)) /* SDRC_D3 */\
+	MUX_VAL(CP(SDRC_D4),        (IEN  | PTD | DIS | M0)) /* SDRC_D4 */\
+	MUX_VAL(CP(SDRC_D5),        (IEN  | PTD | DIS | M0)) /* SDRC_D5 */\
+	MUX_VAL(CP(SDRC_D6),        (IEN  | PTD | DIS | M0)) /* SDRC_D6 */\
+	MUX_VAL(CP(SDRC_D7),        (IEN  | PTD | DIS | M0)) /* SDRC_D7 */\
+	MUX_VAL(CP(SDRC_D8),        (IEN  | PTD | DIS | M0)) /* SDRC_D8 */\
+	MUX_VAL(CP(SDRC_D9),        (IEN  | PTD | DIS | M0)) /* SDRC_D9 */\
+	MUX_VAL(CP(SDRC_D10),       (IEN  | PTD | DIS | M0)) /* SDRC_D10 */\
+	MUX_VAL(CP(SDRC_D11),       (IEN  | PTD | DIS | M0)) /* SDRC_D11 */\
+	MUX_VAL(CP(SDRC_D12),       (IEN  | PTD | DIS | M0)) /* SDRC_D12 */\
+	MUX_VAL(CP(SDRC_D13),       (IEN  | PTD | DIS | M0)) /* SDRC_D13 */\
+	MUX_VAL(CP(SDRC_D14),       (IEN  | PTD | DIS | M0)) /* SDRC_D14 */\
+	MUX_VAL(CP(SDRC_D15),       (IEN  | PTD | DIS | M0)) /* SDRC_D15 */\
+	MUX_VAL(CP(SDRC_D16),       (IEN  | PTD | DIS | M0)) /* SDRC_D16 */\
+	MUX_VAL(CP(SDRC_D17),       (IEN  | PTD | DIS | M0)) /* SDRC_D17 */\
+	MUX_VAL(CP(SDRC_D18),       (IEN  | PTD | DIS | M0)) /* SDRC_D18 */\
+	MUX_VAL(CP(SDRC_D19),       (IEN  | PTD | DIS | M0)) /* SDRC_D19 */\
+	MUX_VAL(CP(SDRC_D20),       (IEN  | PTD | DIS | M0)) /* SDRC_D20 */\
+	MUX_VAL(CP(SDRC_D21),       (IEN  | PTD | DIS | M0)) /* SDRC_D21 */\
+	MUX_VAL(CP(SDRC_D22),       (IEN  | PTD | DIS | M0)) /* SDRC_D22 */\
+	MUX_VAL(CP(SDRC_D23),       (IEN  | PTD | DIS | M0)) /* SDRC_D23 */\
+	MUX_VAL(CP(SDRC_D24),       (IEN  | PTD | DIS | M0)) /* SDRC_D24 */\
+	MUX_VAL(CP(SDRC_D25),       (IEN  | PTD | DIS | M0)) /* SDRC_D25 */\
+	MUX_VAL(CP(SDRC_D26),       (IEN  | PTD | DIS | M0)) /* SDRC_D26 */\
+	MUX_VAL(CP(SDRC_D27),       (IEN  | PTD | DIS | M0)) /* SDRC_D27 */\
+	MUX_VAL(CP(SDRC_D28),       (IEN  | PTD | DIS | M0)) /* SDRC_D28 */\
+	MUX_VAL(CP(SDRC_D29),       (IEN  | PTD | DIS | M0)) /* SDRC_D29 */\
+	MUX_VAL(CP(SDRC_D30),       (IEN  | PTD | DIS | M0)) /* SDRC_D30 */\
+	MUX_VAL(CP(SDRC_D31),       (IEN  | PTD | DIS | M0)) /* SDRC_D31 */\
+	MUX_VAL(CP(SDRC_CLK),       (IEN  | PTD | DIS | M0)) /* SDRC_CLK */\
+	MUX_VAL(CP(SDRC_DQS0),      (IEN  | PTD | DIS | M0)) /* SDRC_DQS0 */\
+	MUX_VAL(CP(SDRC_DQS1),      (IEN  | PTD | DIS | M0)) /* SDRC_DQS1 */\
+	MUX_VAL(CP(SDRC_DQS2),      (IEN  | PTD | DIS | M0)) /* SDRC_DQS2 */\
+	MUX_VAL(CP(SDRC_DQS3),      (IEN  | PTD | DIS | M0)) /* SDRC_DQS3 */\
+	MUX_VAL(CP(GPMC_A1),        (IDIS | PTD | DIS | M0)) /* GPMC_A1 */\
+	MUX_VAL(CP(GPMC_A2),        (IDIS | PTD | DIS | M0)) /* GPMC_A2 */\
+	MUX_VAL(CP(GPMC_A3),        (IDIS | PTD | DIS | M0)) /* GPMC_A3 */\
+	MUX_VAL(CP(GPMC_A4),        (IDIS | PTD | DIS | M0)) /* GPMC_A4 */\
+	MUX_VAL(CP(GPMC_A5),        (IDIS | PTD | DIS | M0)) /* GPMC_A5 */\
+	MUX_VAL(CP(GPMC_A6),        (IDIS | PTD | DIS | M0)) /* GPMC_A6 */\
+	MUX_VAL(CP(GPMC_A7),        (IDIS | PTD | DIS | M0)) /* GPMC_A7 */\
+	MUX_VAL(CP(GPMC_A8),        (IDIS | PTD | DIS | M0)) /* GPMC_A8 */\
+	MUX_VAL(CP(GPMC_A9),        (IDIS | PTD | DIS | M0)) /* GPMC_A9 */\
+	MUX_VAL(CP(GPMC_A10),       (IDIS | PTD | DIS | M0)) /* GPMC_A10 */\
+	MUX_VAL(CP(GPMC_D0),        (IEN  | PTD | DIS | M0)) /* GPMC_D0 */\
+	MUX_VAL(CP(GPMC_D1),        (IEN  | PTD | DIS | M0)) /* GPMC_D1 */\
+	MUX_VAL(CP(GPMC_D2),        (IEN  | PTD | DIS | M0)) /* GPMC_D2 */\
+	MUX_VAL(CP(GPMC_D3),        (IEN  | PTD | DIS | M0)) /* GPMC_D3 */\
+	MUX_VAL(CP(GPMC_D4),        (IEN  | PTD | DIS | M0)) /* GPMC_D4 */\
+	MUX_VAL(CP(GPMC_D5),        (IEN  | PTD | DIS | M0)) /* GPMC_D5 */\
+	MUX_VAL(CP(GPMC_D6),        (IEN  | PTD | DIS | M0)) /* GPMC_D6 */\
+	MUX_VAL(CP(GPMC_D7),        (IEN  | PTD | DIS | M0)) /* GPMC_D7 */\
+	MUX_VAL(CP(GPMC_D8),        (IEN  | PTD | DIS | M0)) /* GPMC_D8 */\
+	MUX_VAL(CP(GPMC_D9),        (IEN  | PTD | DIS | M0)) /* GPMC_D9 */\
+	MUX_VAL(CP(GPMC_D10),       (IEN  | PTD | DIS | M0)) /* GPMC_D10 */\
+	MUX_VAL(CP(GPMC_D11),       (IEN  | PTD | DIS | M0)) /* GPMC_D11 */\
+	MUX_VAL(CP(GPMC_D12),       (IEN  | PTD | DIS | M0)) /* GPMC_D12 */\
+	MUX_VAL(CP(GPMC_D13),       (IEN  | PTD | DIS | M0)) /* GPMC_D13 */\
+	MUX_VAL(CP(GPMC_D14),       (IEN  | PTD | DIS | M0)) /* GPMC_D14 */\
+	MUX_VAL(CP(GPMC_D15),       (IEN  | PTD | DIS | M0)) /* GPMC_D15 */\
+	MUX_VAL(CP(GPMC_NCS0),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS0 */\
+	MUX_VAL(CP(GPMC_NCS1),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS1 */\
+	MUX_VAL(CP(GPMC_NCS2),      (IDIS | PTU | EN  | M0)) /* GPIO_nCS2 */\
+	MUX_VAL(CP(GPMC_NCS3),      (IDIS | PTU | EN  | M0)) /* GPIO_nCS3 */\
+	MUX_VAL(CP(GPMC_NCS4),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS4 */\
+	MUX_VAL(CP(GPMC_NCS5),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS5 */\
+	MUX_VAL(CP(GPMC_NCS6),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS6 */\
+	MUX_VAL(CP(GPMC_NCS7),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS7 */\
+	MUX_VAL(CP(GPMC_CLK),       (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\
+	MUX_VAL(CP(GPMC_NADV_ALE),  (IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE*/\
+	MUX_VAL(CP(GPMC_NOE),       (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\
+	MUX_VAL(CP(GPMC_NWE),       (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\
+	MUX_VAL(CP(GPMC_NBE0_CLE),  (IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE*/\
+	MUX_VAL(CP(GPMC_NBE1),      (IEN  | PTD | DIS | M0)) /* GPMC_nBE1 */\
+	MUX_VAL(CP(GPMC_NWP),       (IEN  | PTD | DIS | M0)) /* GPMC_nWP */\
+	MUX_VAL(CP(GPMC_WAIT0),     (IEN  | PTU | EN  | M0)) /* GPMC_WAIT0 */\
+	MUX_VAL(CP(MMC1_CLK),       (IDIS | PTU | EN  | M0)) /* MMC1_CLK */\
+	MUX_VAL(CP(MMC1_CMD),       (IEN  | PTU | EN  | M0)) /* MMC1_CMD */\
+	MUX_VAL(CP(MMC1_DAT0),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT0 */\
+	MUX_VAL(CP(MMC1_DAT1),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT1 */\
+	MUX_VAL(CP(MMC1_DAT2),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT2 */\
+	MUX_VAL(CP(MMC1_DAT3),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT3 */\
+	MUX_VAL(CP(UART1_TX),       (IDIS | PTD | DIS | M0)) /* UART1_TX */\
+	MUX_VAL(CP(UART1_RX),       (IEN  | PTD | DIS | M0)) /* UART1_RX */\
+	MUX_VAL(CP(UART3_TX_IRTX),  (IDIS | PTD | DIS | M0)) /* UART3_TX */\
+	MUX_VAL(CP(UART3_RX_IRRX),  (IEN  | PTD | DIS | M0)) /* UART3_RX */\
+	MUX_VAL(CP(I2C1_SCL),       (IEN  | PTU | EN  | M0)) /* I2C1_SCL */\
+	MUX_VAL(CP(I2C1_SDA),       (IEN  | PTU | EN  | M0)) /* I2C1_SDA */\
+	MUX_VAL(CP(I2C4_SCL),       (IEN  | PTU | EN  | M0)) /* I2C4_SCL */\
+	MUX_VAL(CP(I2C4_SDA),       (IEN  | PTU | EN  | M0)) /* I2C4_SDA */\
+	MUX_VAL(CP(SYS_32K),        (IEN  | PTD | DIS | M0)) /* SYS_32K */\
+	MUX_VAL(CP(SYS_BOOT0),      (IEN  | PTD | DIS | M4)) /* GPIO_2 */\
+	MUX_VAL(CP(SYS_BOOT1),      (IEN  | PTD | DIS | M4)) /* GPIO_3 */\
+	MUX_VAL(CP(SYS_BOOT2),      (IEN  | PTD | DIS | M4)) /* GPIO_4 */\
+	MUX_VAL(CP(SYS_BOOT3),      (IEN  | PTD | DIS | M4)) /* GPIO_5 */\
+	MUX_VAL(CP(SYS_BOOT4),      (IEN  | PTD | DIS | M4)) /* GPIO_6 */\
+	MUX_VAL(CP(SYS_BOOT5),      (IEN  | PTD | DIS | M4)) /* GPIO_7 */\
+	MUX_VAL(CP(SYS_BOOT6),      (IEN  | PTD | DIS | M4)) /* GPIO_8 */\
+	MUX_VAL(CP(SDRC_CKE0),      (IDIS | PTU | EN  | M0)) /* SDRC_CKE0 */\
+	MUX_VAL(CP(SDRC_CKE1),      (IDIS | PTU | EN  | M0)) /* SDRC_CKE1 */
+#endif
diff --git a/boards.cfg b/boards.cfg
index 6f8db44..eaa5ea0 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -263,6 +263,7 @@ omap4_sdp4430	arm	armv7		sdp4430		ti		omap4
 am3517_evm	arm	armv7		am3517evm	logicpd		omap3
 devkit8000	arm	armv7		devkit8000	timll		omap3
 igep0020	arm	armv7		igep0020	isee		omap3
+igep0030	arm	armv7		igep0030	isee		omap3
 s5p_goni	arm	armv7		goni		samsung		s5pc1xx
 smdkc100	arm	armv7		smdkc100	samsung		s5pc1xx
 ixdpg425	arm	ixp
diff --git a/include/configs/igep0030.h b/include/configs/igep0030.h
new file mode 100644
index 0000000..5e2e0ed
--- /dev/null
+++ b/include/configs/igep0030.h
@@ -0,0 +1,215 @@
+/*
+ * (C) Copyright 2010
+ * ISEE 2007 SL, <www.iseebcn.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
+#define CONFIG_OMAP		1	/* in a TI OMAP core */
+#define CONFIG_OMAP34XX		1	/* which is a 34XX */
+#define CONFIG_OMAP3430		1	/* which is in a 3430 */
+#define CONFIG_OMAP3_IGEP0030	1	/* working with IGEP0030 */
+
+#define CONFIG_SDRC	/* The chip has SDRC controller */
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_DISPLAY_BOARDINFO	1
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_REVISION_TAG		1
+
+/*
+ * NS16550 Configuration
+ */
+
+#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+
+/* select serial console configuration */
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CONFIG_SERIAL3			3
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600, 115200}
+#define CONFIG_MMC			1
+#define CONFIG_OMAP3_MMC		1
+#define CONFIG_DOS_PARTITION		1
+
+/* DDR  */
+#define CONFIG_OMAP3_NUMONYX_DDR	1
+
+/* USB */
+#define CONFIG_MUSB_UDC			1
+#define CONFIG_USB_OMAP3		1
+#define CONFIG_TWL4030_USB		1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE		1
+#define CONFIG_USB_TTY			1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID		0x0451
+#define CONFIG_USBD_PRODUCTID		0x5678
+#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME	"IGEP"
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+#define CONFIG_CMD_FAT		/* FAT support			*/
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+#define CONFIG_CMD_MMC		/* MMC support			*/
+#define CONFIG_CMD_ONENAND	/* ONENAND support		*/
+#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands	*/
+#define CONFIG_MTD_DEVICE
+
+#undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
+#undef CONFIG_CMD_IMLS		/* List all found images	*/
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C			1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_DRIVER_OMAP34XX_I2C	1
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER		1
+
+/* Environment information */
+#define CONFIG_BOOTCOMMAND \
+	"mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0"
+
+#define CONFIG_BOOTDELAY		3
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"usbtty=cdc_acm\0"
+
+#define CONFIG_AUTO_COMPLETE		1
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		"U-Boot # "
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
+								/* works on */
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
+					0x01F00000) /* 31MB */
+
+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
+							/* load address */
+
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
+
+/*
+ * Physical Memory Map
+ *
+ */
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
+#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 meg */
+#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C		1
+
+/*
+ * FLASH and environment organization
+ */
+
+#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M /* Configure the PISMO */
+
+#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
+
+#define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
+
+#define CONFIG_ENV_IS_IN_ONENAND	1
+#define CONFIG_ENV_SIZE			(512 << 10) /* Total Size Environment */
+#define CONFIG_ENV_ADDR			ONENAND_ENV_OFFSET
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* bytes for initial data */
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
+
+#endif /* __CONFIG_H */
-- 
1.7.1



More information about the U-Boot mailing list