[U-Boot] [PATCH V3] mvsata_ide: adjust port init sequence

[Prafulla Wadaskar]

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de 
> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Albert Aribaud
> Sent: Wednesday, September 08, 2010 11:01 PM
> To: u-boot at lists.denx.de
> Subject: [U-Boot] [PATCH V3] mvsata_ide: adjust port init sequence
> 
> mvsata_ide_initialize_port(): adjust init sequence (SStatus
> should be checked only after all writes to SControl) and
> return success/failure to ide_preinit().
> 
> Also, as some tests showed init durations in the hundreds
> of us, raise the time-out to 01 ms to be on the safe side.
> 
> Signed-off-by: Albert Aribaud <albert.aribaud at free.fr>
> ---
> PATCH HISTORY
> 
> V1	Initial patch.
> V2	Fixed wrong placement of comment.
> 	Fixed wrong description (was 01 ms, should have been 10).
> 	Added Signed-off-by.
> V3	Replaced return status values with symbolic names.
> 	Made error status values negative.
> 	Renamed 'tout' to 'timeleft' for clarity.
> 	Replaced ternary '?:' operator with '!' and if.
> 
> Patch was run through checkscript.pl with 0 errors and warnings.
> 
>  drivers/block/mvsata_ide.c |   42 
> +++++++++++++++++++++++++++++++++---------
>  1 files changed, 33 insertions(+), 9 deletions(-)
> 

Applied to u-boot-marvell.git master branch

Regards.
Prafulla . .