[U-Boot] [PATCH V2 1/3] Kirkwood: dram_init is moved to dram.c
Prafulla Wadaskar
prafulla at marvell.com
Tue Oct 12 07:02:35 CEST 2010
> -----Original Message-----
> From: Prafulla Wadaskar [mailto:prafulla at marvell.com]
> Sent: Thursday, October 07, 2010 8:29 PM
> To: u-boot at lists.denx.de
> Cc: Prabhanjan Sarnaik; Ashish Karkare; Prafulla Wadaskar
> Subject: [PATCH V2 1/3] Kirkwood: dram_init is moved to dram.c
>
> For all Kirkwood boards so far dram_init function is duplicated
> dram_init function is moved to dram.c and relevant code from all
> board specific files removed
>
> If any board needs specific dram init handling than standard one,
> then, a macro CONFIG_SYS_BOARD_DRAM_INIT should be defined in
> board config header file and the dram_init function can be put
> in board specific source file
> For ex. keymile boards
>
> Signed-off-by: Prafulla Wadaskar <prafulla at marvell.com>
> ---
> Changelog
> v2:
> dram_init only performed for consecutive memory
> removed CONFIG_SYS_WITHOUT_RELOC dependency
> dram_init_banksize added to avoid re-configuration of dram bank 0
>
> arch/arm/cpu/arm926ejs/kirkwood/dram.c | 38
> +++++++++++++++++++++++
> board/Marvell/guruplug/guruplug.c | 11 ------
> board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 11 ------
> board/Marvell/openrd_base/openrd_base.c | 11 ------
> board/Marvell/rd6281a/rd6281a.c | 11 ------
> board/Marvell/sheevaplug/sheevaplug.c | 11 ------
> include/configs/keymile-common.h | 1 +
> 7 files changed, 39 insertions(+), 55 deletions(-)
>
Applied to u-boot-marvell.git master branch
Regards.
Prafulla . .
More information about the U-Boot
mailing list