[U-Boot] [PATCH 0/5] da850evm NAND support

Ben Gardiner bengardiner at nanometrics.ca
Tue Oct 12 18:57:57 CEST 2010


This patch series adds NAND support to the da850evm. The support is in the
spirit of that found in the omap-l1 and u-boot-davinci trees where NAND support
can be enabled with the addition of a single '#define CONFIG_USE_NAND' to the 
top of the include/configs/da850evm.h file. Pinmux entries are added for NAND
so that NAND is usable even when the boot mode is not from NAND. Also the 
mtdpart, ubi and ubifs commands are proposed to be added to the NAND support 
because of their importance when using NAND.

Ben Gardiner (5):
  davinci_nand, trivial : use symbolic ECC start command
  da850evm : enable NAND even when not in NAND boot mode
  da850evm: setup the NAND flash timings
  da850evm: setup NAND support under CONFIG_USE_NAND
  da850evm: add mtdpart and ubi commands with NAND support

 board/davinci/da8xxevm/da850evm.c |   40 +++++++++++++++++++++++++++++++++++++
 drivers/mtd/nand/davinci_nand.c   |    3 +-
 include/configs/da850evm.h        |   37 ++++++++++++++++++++++++++++++++++
 3 files changed, 79 insertions(+), 1 deletions(-)


More information about the U-Boot mailing list