[U-Boot] [PATCH] Disable unused chip-select for DDR controller interleaving

[York Sun]

When DDR controller interleaving is eabled and less than all bank (chip-select)
interleaving is seletected, the unused chip-select should be disabled.

Signed-off-by: York Sun <yorksun at freescale.com>
---
 arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c |   13 ++++++++++---
 1 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index e82082e..e981262 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -1184,6 +1184,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 	unsigned int sr_it;
 	unsigned int zq_en;
 	unsigned int wrlvl_en;
+	int cs_en = 1;
 
 	memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t));
 
@@ -1250,16 +1251,20 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 			 * and each controller uses rank interleaving within
 			 * itself. Therefore the starting and ending address
 			 * on each controller is twice the amount present on
-			 * each controller.
+			 * each controller.When
 			 */
 			unsigned long long ctlr_density = 0;
 			switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
 			case FSL_DDR_CS0_CS1:
 			case FSL_DDR_CS0_CS1_AND_CS2_CS3:
 				ctlr_density = dimm_params[0].rank_density * 2;
+				if (i > 1)
+					cs_en = 0;
 				break;
 			case FSL_DDR_CS2_CS3:
 				ctlr_density = dimm_params[0].rank_density;
+				if (i > 0)
+					cs_en = 0;
 				break;
 			case FSL_DDR_CS0_CS1_CS2_CS3:
 				/*
@@ -1379,8 +1384,10 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 			);
 
 		debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
-		set_csn_config(dimm_number, i, ddr, popts, dimm_params);
-		set_csn_config_2(i, ddr);
+		if (cs_en) {
+			set_csn_config(dimm_number, i, ddr, popts, dimm_params);
+			set_csn_config_2(i, ddr);
+		}
 	}
 
 	set_ddr_eor(ddr, popts);
-- 
1.7.0.4