[U-Boot] Pull request: u-boot-arm

Wolfgang Denk wd at denx.de
Wed Oct 13 21:00:26 CEST 2010


In message <20101013184030.B935C1365CC at gemini.denx.de> you wrote:
> The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:
>
>   Merge branch 'master' of git://git.denx.de/u-boot-x86 (2010-10-11 10:00:34 +0200)
>
> are available in the git repository at:
>
>   git://git.denx.de/u-boot-arm.git master
>
> Albert Aribaud (6):
>       arm: bugfix: replace ble with blo in start.S files
>       orion5x: fix relocation-incompatible code
>       mvsata_ide: adjust port init sequence
>       orion5x: optimize window size computation
>       mvsata_ide: adjust port init sequence
>       orion5x: optimize window size computation
>
> Alexander Stein (1):
>       at91: Add arch_preboot_os which disables PIT in a faster way
>
> Andreas Bießmann (6):
>       at91_emac.c: fix 'Warning: eth device name has a space!'
>       at91_emac.c: poll for IDLE when writing PHY
>       at91_emac.h: fix typo in register definition
>       atmel_usart: change register access to C structure
>       arch/arm/include/asm/sizes.h: cleanups
>       board/armltd/integrator/split_by_variant.sh: fix 'echo -n'
>
> Ben Gardiner (1):
>       ARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOC
>
> Heiko Schocher (1):
>       ARM: relocation: fix typo in comment
>
> Matt Waddel (2):
>       ARMV7: Versatile Express Coretile CortexA9x4 support
>       ARMV7: Fixed baudrate setting in pl01x driver
>
> Prafulla Wadaskar (8):
>       Kirkwood: print_cpuinfo fixed for valid devid revid
>       Kirkwood: dram_init is moved to dram.c
>       kirkwood: added common config file mv-common.h
>       Kirkwood: Changes specific to ARM relocation support
>       Kirkwood: print_cpuinfo fixed for valid devid revid
>       Kirkwood: dram_init is moved to dram.c
>       kirkwood: added common config file mv-common.h
>       Kirkwood: Changes specific to ARM relocation support
>
> Reinhard Meyer (1):
>       AT91: convert cpu.c to struct SoC access
>
> Stefano Babic (10):
>       Use common function to set GPIOs for MX3 and MX5
>       ARM: Use syslib functions for all CORTEXA8
>       MX51: Added pins definition to set up pads
>       MX51: add structure to access System Reset Controller
>       MXC: Add watchdog support to serial driver
>       MX51: Drop unused header file for mx51evk
>       MXC: Correct SPI_CPOL setting in SPI driver
>       MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51
>       MX51: Register definitions cannot be included in board config file
>       MX51: Support for TTECH vision2 board
>
> Wolfgang Denk (3):
>       Merge branch 'master' of git://git.denx.de/u-boot-imx
>       Merge branch 'at91' of git://git.denx.de/u-boot-atmel
>       Merge branch 'master' of git://git.denx.de/u-boot-marvell
>
>  MAINTAINERS                                        |    5 +
>  MAKEALL                                            |    1 +
>  arch/arm/cpu/arm1136/start.S                       |    8 +-
>  arch/arm/cpu/arm1176/start.S                       |   10 +-
>  arch/arm/cpu/arm720t/start.S                       |   10 +-
>  arch/arm/cpu/arm920t/start.S                       |   10 +-
>  arch/arm/cpu/arm925t/start.S                       |   10 +-
>  arch/arm/cpu/arm926ejs/at91/cpu.c                  |   48 +-
>  arch/arm/cpu/arm926ejs/kirkwood/cpu.c              |   34 +-
>  arch/arm/cpu/arm926ejs/kirkwood/dram.c             |   38 +
>  arch/arm/cpu/arm926ejs/orion5x/cpu.c               |  112 ++--
>  arch/arm/cpu/arm926ejs/orion5x/timer.c             |    6 +-
>  arch/arm/cpu/arm926ejs/start.S                     |   10 +-
>  arch/arm/cpu/arm946es/start.S                      |    8 +-
>  arch/arm/cpu/arm_intcm/start.S                     |   10 +-
>  arch/arm/cpu/armv7/Makefile                        |    3 +-
>  arch/arm/cpu/armv7/omap-common/Makefile            |    1 -
>  arch/arm/cpu/armv7/start.S                         |    8 +-
>  arch/arm/cpu/armv7/{omap-common => }/syslib.c      |    0
>  arch/arm/cpu/ixp/start.S                           |   10 +-
>  arch/arm/cpu/lh7a40x/start.S                       |   11 +-
>  arch/arm/cpu/pxa/start.S                           |    8 +-
>  arch/arm/cpu/s3c44b0/start.S                       |   12 +-
>  arch/arm/cpu/sa1100/start.S                        |   10 +-
>  arch/arm/include/asm/arch-arm925t/sizes.h          |   50 --
>  arch/arm/include/asm/arch-arm926ejs/sizes.h        |   51 --
>  arch/arm/include/asm/arch-armv7/sysctrl.h          |   70 ++
>  .../arm/include/asm/arch-armv7/systimer.h          |   54 +-
>  .../arm/include/asm/arch-armv7/wdt.h               |   57 +-
>  arch/arm/include/asm/arch-at91/at91_emac.h         |    2 +-
>  arch/arm/include/asm/arch-kirkwood/cpu.h           |    2 +
>  arch/arm/include/asm/arch-mx31/mx31-regs.h         |   14 +-
>  arch/arm/include/asm/arch-mx31/mx31.h              |   25 -
>  arch/arm/include/asm/arch-mx51/imx-regs.h          |   26 +-
>  arch/arm/include/asm/arch-mx51/mx51_pins.h         |   44 ++
>  arch/arm/include/asm/arch-mx51/sys_proto.h         |    1 +
>  arch/arm/include/asm/arch-omap/sizes.h             |   52 --
>  arch/arm/include/asm/arch-omap24xx/omap2420.h      |    2 +-
>  arch/arm/include/asm/arch-omap24xx/sizes.h         |   49 --
>  arch/arm/include/asm/arch-orion5x/cpu.h            |    1 +
>  arch/arm/include/asm/sizes.h                       |    5 +-
>  board/Marvell/guruplug/guruplug.c                  |   11 -
>  board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c    |   11 -
>  board/Marvell/openrd_base/openrd_base.c            |   11 -
>  board/Marvell/rd6281a/rd6281a.c                    |   11 -
>  board/Marvell/sheevaplug/sheevaplug.c              |   11 -
>  board/armltd/integrator/split_by_variant.sh        |  129 ++--
>  board/armltd/vexpress/Makefile                     |   49 ++
>  board/armltd/vexpress/ca9x4_ct_vxp.c               |  220 ++++++
>  board/armltd/vexpress/config.mk                    |   23 +
>  board/armltd/vexpress/u-boot.lds                   |   65 ++
>  board/davedenx/qong/qong.c                         |   29 +-
>  board/freescale/mx51evk/mx51evk.c                  |    2 -
>  board/ttcontrol/vision2/Makefile                   |   48 ++
>  board/ttcontrol/vision2/config.mk                  |   25 +
>  board/ttcontrol/vision2/imximage_hynix.cfg         |  209 ++++++
>  board/ttcontrol/vision2/vision2.c                  |  711 ++++++++++++++++> ++++
>  boards.cfg                                         |    2 +
>  drivers/block/mvsata_ide.c                         |   42 +-
>  drivers/gpio/Makefile                              |    2 +-
>  drivers/gpio/{mx31_gpio.c => mxc_gpio.c}           |   47 +-
>  drivers/misc/fsl_pmic.c                            |   10 +-
>  drivers/net/at91_emac.c                            |   22 +-
>  drivers/serial/atmel_usart.c                       |   36 +-
>  drivers/serial/atmel_usart.h                       |   56 +-
>  drivers/serial/serial_mxc.c                        |    7 +-
>  drivers/serial/serial_pl01x.c                      |   93 +--
>  drivers/spi/mxc_spi.c                              |  168 ++++--
>  include/configs/ca9x4_ct_vxp.h                     |  196 ++++++
>  include/configs/da850evm.h                         |    1 -
>  include/configs/guruplug.h                         |  103 +---
>  include/configs/h2_p2_dbg_board.h                  |    2 +-
>  include/configs/imx27lite-common.h                 |    3 +-
>  include/configs/imx31_litekit.h                    |    4 +-
>  include/configs/imx31_phycore.h                    |    2 +-
>  include/configs/keymile-common.h                   |    1 +
>  include/configs/km_arm.h                           |    2 +-
>  include/configs/mv-common.h                        |  230 +++++++
>  include/configs/mv88f6281gtw_ge.h                  |  120 +---
>  include/configs/mx31ads.h                          |    4 +-
>  include/configs/mx31pdk.h                          |    4 +-
>  include/configs/mx51evk.h                          |    2 +-
>  include/configs/omap1510.h                         |    2 +-
>  include/configs/omap3_beagle.h                     |    3 +-
>  include/configs/omap730.h                          |    2 +-
>  include/configs/openrd_base.h                      |  146 +----
>  include/configs/qong.h                             |    9 +-
>  include/configs/rd6281a.h                          |  101 +---
>  include/configs/sheevaplug.h                       |  104 +---
>  include/configs/tx25.h                             |    3 +-
>  include/configs/vision2.h                          |  214 ++++++
>  include/mc13892.h                                  |    3 +
>  .../mx51evk/mx51evk.h => include/mxc_gpio.h        |   50 +-
>  93 files changed, 2904 insertions(+), 1345 deletions(-)
>  rename arch/arm/cpu/armv7/{omap-common => }/syslib.c (100%)
>  delete mode 100644 arch/arm/include/asm/arch-arm925t/sizes.h
>  delete mode 100644 arch/arm/include/asm/arch-arm926ejs/sizes.h
>  create mode 100644 arch/arm/include/asm/arch-armv7/sysctrl.h
>  copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv> 7/systimer.h (55%)
>  copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv> 7/wdt.h (55%)
>  delete mode 100644 arch/arm/include/asm/arch-omap/sizes.h
>  delete mode 100644 arch/arm/include/asm/arch-omap24xx/sizes.h
>  create mode 100644 board/armltd/vexpress/Makefile
>  create mode 100644 board/armltd/vexpress/ca9x4_ct_vxp.c
>  create mode 100644 board/armltd/vexpress/config.mk
>  create mode 100644 board/armltd/vexpress/u-boot.lds
>  create mode 100644 board/ttcontrol/vision2/Makefile
>  create mode 100644 board/ttcontrol/vision2/config.mk
>  create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg
>  create mode 100644 board/ttcontrol/vision2/vision2.c
>  rename drivers/gpio/{mx31_gpio.c => mxc_gpio.c} (63%)
>  create mode 100644 include/configs/ca9x4_ct_vxp.h
>  create mode 100644 include/configs/mv-common.h
>  create mode 100644 include/configs/vision2.h
>  rename board/freescale/mx51evk/mx51evk.h => include/mxc_gpio.h (54%)

Applied.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Stupidity, like virtue, is its own reward.


More information about the U-Boot mailing list