[U-Boot] [PATCH 0/3] new BSP for at91rm9200ek

[Andreas Bießmann]

This patch series introduce new board support for at91rm9200ek.
The derived code is now converted to new at91 code. Arm relocation is also
implemented.

There where some tradeoffs regarding device support. Currently the code basis
does not support all devices supported before. This includes
 a) remove support for dataflash since i can not test it (yet, should follow
    in some weeks)
 b) preloader support is disabled since NOR booting does not need any first
    stage loader
 c) MMC/SD-card is currently not supported (but was not before)

Next steps are:
 - get dataflash running
 - remove at91rm9200_usart driver (should merge with atmel_usart)
 - support MMC/SD-Card (also merge with current AT91/AVR32 implementation)
 - merge emac/macb

Andreas Bießmann (3):
  at91rm9200ek: convert to at91
  at91rm9200: enable USB support
  at91rm9200ek: enbable USB support

 MAINTAINERS                               |    4 +
 arch/arm/include/asm/arch-at91/hardware.h |    1 +
 board/atmel/at91rm9200ek/Makefile         |    1 -
 board/atmel/at91rm9200ek/at91rm9200ek.c   |   58 ++-----
 board/atmel/at91rm9200ek/config.mk        |    3 +-
 board/atmel/at91rm9200ek/led.c            |   58 ++++----
 board/atmel/at91rm9200ek/misc.c           |   50 ------
 boards.cfg                                |    2 +-
 include/configs/at91rm9200ek.h            |  233 ++++++++---------------------
 9 files changed, 118 insertions(+), 292 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/misc.c

-- 
1.7.3.1