[U-Boot] [PATCH 02/21] PXA: pxa-regs.h cleanup
Marek Vasut
marek.vasut at gmail.com
Sat Oct 16 21:36:31 CEST 2010
Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
---
arch/arm/cpu/pxa/cpu.c | 28 +-
arch/arm/cpu/pxa/i2c.c | 69 +-
arch/arm/cpu/pxa/pxafb.c | 64 +-
arch/arm/cpu/pxa/timer.c | 7 +-
arch/arm/cpu/pxa/usb.c | 61 +-
arch/arm/include/asm/arch-pxa/hardware.h | 61 +-
arch/arm/include/asm/arch-pxa/pxa-regs.h | 2688 ++++++++++++++++--------------
board/colibri_pxa270/colibri_pxa270.c | 33 +-
board/cradle/cradle.c | 5 +-
board/cradle/lowlevel_init.S | 4 +-
board/csb226/csb226.c | 13 +-
board/delta/delta.c | 37 +-
board/delta/nand.c | 110 +-
board/innokom/innokom.c | 14 +-
board/pxa255_idp/pxa_idp.c | 27 +-
board/trizepsiv/conxs.c | 33 +-
board/vpac270/vpac270.c | 37 +-
board/wepep250/wepep250.c | 11 +-
board/zipitz2/zipitz2.c | 33 +-
board/zylonite/nand.c | 110 +-
drivers/mmc/pxa_mmc.c | 98 +-
drivers/serial/serial_pxa.c | 94 +-
include/configs/cradle.h | 2 -
include/configs/delta.h | 1 +
include/configs/zylonite.h | 1 +
25 files changed, 1911 insertions(+), 1730 deletions(-)
diff --git a/arch/arm/cpu/pxa/cpu.c b/arch/arm/cpu/pxa/cpu.c
index 800d120..330d013 100644
--- a/arch/arm/cpu/pxa/cpu.c
+++ b/arch/arm/cpu/pxa/cpu.c
@@ -30,10 +30,11 @@
* CPU specific code
*/
-#include <common.h>
-#include <command.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
#include <asm/system.h>
+#include <command.h>
+#include <common.h>
static void cache_flush(void);
@@ -71,17 +72,22 @@ void set_GPIO_mode(int gpio_mode)
{
int gpio = gpio_mode & GPIO_MD_MASK_NR;
int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
- int gafr;
+ int val;
+
+ /* This below changes direction setting of GPIO "gpio" */
+ val = readl(GPDR(gpio));
if (gpio_mode & GPIO_MD_MASK_DIR)
- {
- GPDR(gpio) |= GPIO_bit(gpio);
- }
+ val |= GPIO_bit(gpio);
else
- {
- GPDR(gpio) &= ~GPIO_bit(gpio);
- }
- gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
- GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2));
+ val &= ~GPIO_bit(gpio);
+
+ writel(val, GPDR(gpio));
+
+ /* This below updates only AF of GPIO "gpio" */
+ val = readl(GAFR(gpio));
+ val &= ~(0x3 << (((gpio) & 0xf) * 2));
+ val |= fn << (((gpio) & 0xf) * 2);
+ writel(val, GAFR(gpio));
}
#endif /* CONFIG_CPU_MONAHANS */
diff --git a/arch/arm/cpu/pxa/i2c.c b/arch/arm/cpu/pxa/i2c.c
index 6b72ba1..7aa49ae 100644
--- a/arch/arm/cpu/pxa/i2c.c
+++ b/arch/arm/cpu/pxa/i2c.c
@@ -33,6 +33,7 @@
/* FIXME: this file is PXA255 specific! What about other XScales? */
#include <common.h>
+#include <asm/io.h>
#ifdef CONFIG_HARD_I2C
@@ -93,19 +94,21 @@ struct i2c_msg {
static void i2c_reset( void )
{
- ICR &= ~ICR_IUE; /* disable unit */
- ICR |= ICR_UR; /* reset the unit */
+ writel(readl(ICR) & ~ICR_IUE, ICR); /* disable unit */
+ writel(readl(ICR) | ICR_UR, ICR); /* reset the unit */
udelay(100);
- ICR &= ~ICR_IUE; /* disable unit */
+ writel(readl(ICR) & ~ICR_IUE, ICR); /* disable unit */
#ifdef CONFIG_CPU_MONAHANS
- CKENB |= (CKENB_4_I2C); /* | CKENB_1_PWM1 | CKENB_0_PWM0); */
+ /* | CKENB_1_PWM1 | CKENB_0_PWM0); */
+ writel(readl(CKENB) | (CKENB_4_I2C), CKENB);
#else /* CONFIG_CPU_MONAHANS */
- CKEN |= CKEN14_I2C; /* set the global I2C clock on */
+ /* set the global I2C clock on */
+ writel(readl(CKEN) | CKEN14_I2C, CKEN);
#endif
- ISAR = I2C_PXA_SLAVE_ADDR; /* set our slave address */
- ICR = I2C_ICR_INIT; /* set control register values */
- ISR = I2C_ISR_INIT; /* set clear interrupt bits */
- ICR |= ICR_IUE; /* enable unit */
+ writel(I2C_PXA_SLAVE_ADDR, ISAR); /* set our slave address */
+ writel(I2C_ICR_INIT, ICR); /* set control reg values */
+ writel(I2C_ISR_INIT, ISR); /* set clear interrupt bits */
+ writel(readl(ICR) | ICR_IUE, ICR); /* enable unit */
udelay(100);
}
@@ -159,22 +162,26 @@ int i2c_transfer(struct i2c_msg *msg)
goto transfer_error_bus_busy;
/* start transmission */
- ICR &= ~ICR_START;
- ICR &= ~ICR_STOP;
- IDBR = msg->data;
- if (msg->condition == I2C_COND_START) ICR |= ICR_START;
- if (msg->condition == I2C_COND_STOP) ICR |= ICR_STOP;
- if (msg->acknack == I2C_ACKNAK_SENDNAK) ICR |= ICR_ACKNAK;
- if (msg->acknack == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
- ICR &= ~ICR_ALDIE;
- ICR |= ICR_TB;
+ writel(readl(ICR) & ~ICR_START, ICR);
+ writel(readl(ICR) & ~ICR_STOP, ICR);
+ writel(msg->data, IDBR);
+ if (msg->condition == I2C_COND_START)
+ writel(readl(ICR) | ICR_START, ICR);
+ if (msg->condition == I2C_COND_STOP)
+ writel(readl(ICR) | ICR_STOP, ICR);
+ if (msg->acknack == I2C_ACKNAK_SENDNAK)
+ writel(readl(ICR) | ICR_ACKNAK, ICR);
+ if (msg->acknack == I2C_ACKNAK_SENDACK)
+ writel(readl(ICR) & ~ICR_ACKNAK, ICR);
+ writel(readl(ICR) & ~ICR_ALDIE, ICR);
+ writel(readl(ICR) | ICR_TB, ICR);
/* transmit register empty? */
if (!i2c_isr_set_cleared(ISR_ITE,0))
goto transfer_error_transmit_timeout;
/* clear 'transmit empty' state */
- ISR |= ISR_ITE;
+ writel(readl(ISR) | ISR_ITE, ISR);
/* wait for ACK from slave */
if (msg->acknack == I2C_ACKNAK_WAITACK)
@@ -189,23 +196,27 @@ int i2c_transfer(struct i2c_msg *msg)
goto transfer_error_bus_busy;
/* start receive */
- ICR &= ~ICR_START;
- ICR &= ~ICR_STOP;
- if (msg->condition == I2C_COND_START) ICR |= ICR_START;
- if (msg->condition == I2C_COND_STOP) ICR |= ICR_STOP;
- if (msg->acknack == I2C_ACKNAK_SENDNAK) ICR |= ICR_ACKNAK;
- if (msg->acknack == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
- ICR &= ~ICR_ALDIE;
- ICR |= ICR_TB;
+ writel(readl(ICR) & ~ICR_START, ICR);
+ writel(readl(ICR) & ~ICR_STOP, ICR);
+ if (msg->condition == I2C_COND_START)
+ writel(readl(ICR) | ICR_START, ICR);
+ if (msg->condition == I2C_COND_STOP)
+ writel(readl(ICR) | ICR_STOP, ICR);
+ if (msg->acknack == I2C_ACKNAK_SENDNAK)
+ writel(readl(ICR) | ICR_ACKNAK, ICR);
+ if (msg->acknack == I2C_ACKNAK_SENDACK)
+ writel(readl(ICR) & ~ICR_ACKNAK, ICR);
+ writel(readl(ICR) & ~ICR_ALDIE, ICR);
+ writel(readl(ICR) | ICR_TB, ICR);
/* receive register full? */
if (!i2c_isr_set_cleared(ISR_IRF,0))
goto transfer_error_receive_timeout;
- msg->data = IDBR;
+ msg->data = readl(IDBR);
/* clear 'receive empty' state */
- ISR |= ISR_IRF;
+ writel(readl(ISR) | ISR_IRF, ISR);
break;
diff --git a/arch/arm/cpu/pxa/pxafb.c b/arch/arm/cpu/pxa/pxafb.c
index 50e9cc0..cb004b2 100644
--- a/arch/arm/cpu/pxa/pxafb.c
+++ b/arch/arm/cpu/pxa/pxafb.c
@@ -35,6 +35,7 @@
#include <stdio_dev.h>
#include <lcd.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
/* #define DEBUG */
@@ -377,12 +378,14 @@ static void pxafb_setup_gpio (vidinfo_t *vid)
{
debug("Setting GPIO for 4 bit data\n");
/* bits 58-61 */
- GPDR1 |= (0xf << 26);
- GAFR1_U = (GAFR1_U & ~(0xff << 20)) | (0xaa << 20);
+ writel(readl(GPDR1) | (0xf << 26), GPDR1);
+ writel((readl(GAFR1_U) & ~(0xff << 20)) | (0xaa << 20),
+ GAFR1_U);
/* bits 74-77 */
- GPDR2 |= (0xf << 10);
- GAFR2_L = (GAFR2_L & ~(0xff << 20)) | (0xaa << 20);
+ writel(readl(GPDR2) | (0xf << 10), GPDR2);
+ writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20),
+ GAFR2_L);
}
/* 8 bit interface */
@@ -391,15 +394,17 @@ static void pxafb_setup_gpio (vidinfo_t *vid)
{
debug("Setting GPIO for 8 bit data\n");
/* bits 58-65 */
- GPDR1 |= (0x3f << 26);
- GPDR2 |= (0x3);
+ writel(readl(GPDR1) | (0x3f << 26), GPDR1);
+ writel(readl(GPDR2) | (0x3), GPDR2);
- GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20);
- GAFR2_L = (GAFR2_L & ~0xf) | (0xa);
+ writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20),
+ GAFR1_U);
+ writel((readl(GAFR2_L) & ~0xf) | (0xa), GAFR2_L);
/* bits 74-77 */
- GPDR2 |= (0xf << 10);
- GAFR2_L = (GAFR2_L & ~(0xff << 20)) | (0xaa << 20);
+ writel(readl(GPDR2) | (0xf << 10), GPDR2);
+ writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20),
+ GAFR2_L);
}
/* 16 bit interface */
@@ -407,11 +412,12 @@ static void pxafb_setup_gpio (vidinfo_t *vid)
{
debug("Setting GPIO for 16 bit data\n");
/* bits 58-77 */
- GPDR1 |= (0x3f << 26);
- GPDR2 |= 0x00003fff;
+ writel(readl(GPDR1) | (0x3f << 26), GPDR1);
+ writel(readl(GPDR2) | 0x00003fff, GPDR2);
- GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20);
- GAFR2_L = (GAFR2_L & 0xf0000000) | 0x0aaaaaaa;
+ writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20),
+ GAFR1_U);
+ writel((readl(GAFR2_L) & 0xf0000000) | 0x0aaaaaaa, GAFR2_L);
}
else
{
@@ -425,26 +431,26 @@ static void pxafb_enable_controller (vidinfo_t *vid)
debug("Enabling LCD controller\n");
/* Sequence from 11.7.10 */
- LCCR3 = vid->pxa.reg_lccr3;
- LCCR2 = vid->pxa.reg_lccr2;
- LCCR1 = vid->pxa.reg_lccr1;
- LCCR0 = vid->pxa.reg_lccr0 & ~LCCR0_ENB;
- FDADR0 = vid->pxa.fdadr0;
- FDADR1 = vid->pxa.fdadr1;
- LCCR0 |= LCCR0_ENB;
+ writel(vid->pxa.reg_lccr3, LCCR3);
+ writel(vid->pxa.reg_lccr2, LCCR2);
+ writel(vid->pxa.reg_lccr1, LCCR1);
+ writel(vid->pxa.reg_lccr0 & ~LCCR0_ENB, LCCR0);
+ writel(vid->pxa.fdadr0, FDADR0);
+ writel(vid->pxa.fdadr1, FDADR1);
+ writel(readl(LCCR0) | LCCR0_ENB, LCCR0);
#ifdef CONFIG_CPU_MONAHANS
- CKENA |= CKENA_1_LCD;
+ writel(readl(CKENA) | CKENA_1_LCD, CKENA);
#else
- CKEN |= CKEN16_LCD;
+ writel(readl(CKEN) | CKEN16_LCD, CKEN);
#endif
- debug("FDADR0 = 0x%08x\n", (unsigned int)FDADR0);
- debug("FDADR1 = 0x%08x\n", (unsigned int)FDADR1);
- debug("LCCR0 = 0x%08x\n", (unsigned int)LCCR0);
- debug("LCCR1 = 0x%08x\n", (unsigned int)LCCR1);
- debug("LCCR2 = 0x%08x\n", (unsigned int)LCCR2);
- debug("LCCR3 = 0x%08x\n", (unsigned int)LCCR3);
+ debug("FDADR0 = 0x%08x\n", readl(FDADR0));
+ debug("FDADR1 = 0x%08x\n", readl(FDADR1));
+ debug("LCCR0 = 0x%08x\n", readl(LCCR0));
+ debug("LCCR1 = 0x%08x\n", readl(LCCR1));
+ debug("LCCR2 = 0x%08x\n", readl(LCCR2));
+ debug("LCCR3 = 0x%08x\n", readl(LCCR3));
}
static int pxafb_init (vidinfo_t *vid)
diff --git a/arch/arm/cpu/pxa/timer.c b/arch/arm/cpu/pxa/timer.c
index 8d0f826..ec950c7 100644
--- a/arch/arm/cpu/pxa/timer.c
+++ b/arch/arm/cpu/pxa/timer.c
@@ -26,8 +26,9 @@
* MA 02111-1307 USA
*/
-#include <common.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
+#include <common.h>
#include <div64.h>
#ifdef CONFIG_USE_IRQ
@@ -86,7 +87,7 @@ void __udelay (unsigned long usec)
void reset_timer_masked (void)
{
- OSCR = 0;
+ writel(0, OSCR);
}
ulong get_timer_masked (void)
@@ -113,7 +114,7 @@ void udelay_masked (unsigned long usec)
*/
unsigned long long get_ticks(void)
{
- return OSCR;
+ return readl(OSCR);
}
/*
diff --git a/arch/arm/cpu/pxa/usb.c b/arch/arm/cpu/pxa/usb.c
index bd718a6..0311d5e 100644
--- a/arch/arm/cpu/pxa/usb.c
+++ b/arch/arm/cpu/pxa/usb.c
@@ -27,86 +27,79 @@
# if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
#include <usb.h>
int usb_cpu_init(void)
{
#if defined(CONFIG_CPU_MONAHANS)
/* Enable USB host clock. */
- CKENA |= (CKENA_2_USBHOST | CKENA_20_UDC);
+ writel(readl(CKENA) | CKENA_2_USBHOST | CKENA_20_UDC, CKENA);
udelay(100);
#endif
#if defined(CONFIG_PXA27X)
/* Enable USB host clock. */
- CKEN |= CKEN10_USBHOST;
+ writel(readl(CKEN) | CKEN10_USBHOST, CKEN);
#endif
#if defined(CONFIG_CPU_MONAHANS)
/* Configure Port 2 for Host (USB Client Registers) */
- UP2OCR = 0x3000c;
+ writel(0x3000c, UP2OCR);
#endif
- UHCHR |= UHCHR_FHR;
+ writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
wait_ms(11);
- UHCHR &= ~UHCHR_FHR;
+ writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
- UHCHR |= UHCHR_FSBIR;
- while (UHCHR & UHCHR_FSBIR)
+ writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
+ while (readl(UHCHR) & UHCHR_FSBIR)
udelay(1);
#if defined(CONFIG_CPU_MONAHANS)
- UHCHR &= ~UHCHR_SSEP0;
+ writel(readl(UHCHR) & ~UHCHR_SSEP0, UHCHR);
#endif
#if defined(CONFIG_PXA27X)
- UHCHR &= ~UHCHR_SSEP2;
+ writel(readl(UHCHR) & ~UHCHR_SSEP2, UHCHR);
#endif
- UHCHR &= ~UHCHR_SSEP1;
- UHCHR &= ~UHCHR_SSE;
+ writel(readl(UHCHR) & ~(UHCHR_SSEP1 | UHCHR_SSE), UHCHR);
return 0;
}
int usb_cpu_stop(void)
{
- UHCHR |= UHCHR_FHR;
+ writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
udelay(11);
- UHCHR &= ~UHCHR_FHR;
+ writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
- UHCCOMS |= 1;
+ writel(readl(UHCCOMS) | UHCHR_FHR, UHCCOMS);
udelay(10);
#if defined(CONFIG_CPU_MONAHANS)
- UHCHR |= UHCHR_SSEP0;
+ writel(readl(UHCHR) | UHCHR_SSEP0, UHCHR);
#endif
#if defined(CONFIG_PXA27X)
- UHCHR |= UHCHR_SSEP2;
+ writel(readl(UHCHR) | UHCHR_SSEP2, UHCHR);
#endif
- UHCHR |= UHCHR_SSEP1;
- UHCHR |= UHCHR_SSE;
-
- return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
- UHCHR |= UHCHR_FHR;
- udelay(11);
- UHCHR &= ~UHCHR_FHR;
-
- UHCCOMS |= 1;
- udelay(10);
+ writel(readl(UHCHR) | UHCHR_SSEP1 | UHCHR_SSE, UHCHR);
#if defined(CONFIG_CPU_MONAHANS)
- UHCHR |= UHCHR_SSEP0;
+ /* Disable USB host clock. */
+ writel(readl(CKENA) & ~(CKENA_2_USBHOST | CKENA_20_UDC), CKENA);
+ udelay(100);
#endif
#if defined(CONFIG_PXA27X)
- UHCHR |= UHCHR_SSEP2;
+ /* Disable USB host clock. */
+ writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
#endif
- UHCHR |= UHCHR_SSEP1;
- UHCHR |= UHCHR_SSE;
return 0;
}
+int usb_cpu_init_fail(void)
+{
+ return usb_cpu_stop();
+}
+
# endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) */
#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/arch/arm/include/asm/arch-pxa/hardware.h b/arch/arm/include/asm/arch-pxa/hardware.h
index c8c479a..44b800f 100644
--- a/arch/arm/include/asm/arch-pxa/hardware.h
+++ b/arch/arm/include/asm/arch-pxa/hardware.h
@@ -21,6 +21,19 @@
#include <linux/config.h>
#include <asm/mach-types.h>
+/*
+ * Define CONFIG_CPU_MONAHANS in case some CPU of the PXA3xx family is selected.
+ * PXA300/310/320 all have distinct register mappings in some cases, that's why
+ * the exact CPU has to be selected. CONFIG_CPU_MONAHANS is a helper for common
+ * drivers and compatibility glue with old source then.
+ */
+#ifndef CONFIG_CPU_MONAHANS
+#if defined(CONFIG_CPU_PXA300) || \
+ defined(CONFIG_CPU_PXA310) || \
+ defined(CONFIG_CPU_PXA320)
+#define CONFIG_CPU_MONAHANS
+#endif
+#endif
/*
* These are statically mapped PCMCIA IO space for designs using it as a
@@ -51,54 +64,6 @@
* 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff
*/
-/* FIXME: Only this does work for u-boot... find out why... [RS] */
-#define UBOOT_REG_FIX 1
-
-#ifndef UBOOT_REG_FIX
-#ifndef __ASSEMBLY__
-
-#define io_p2v(x) ( ((x) | 0xbe000000) ^ (~((x) >> 1) & 0x06000000) )
-#define io_v2p( x ) ( ((x) & 0x41ffffff) ^ ( ((x) & 0x06000000) << 1) )
-
-/*
- * This __REG() version gives the same results as the one above, except
- * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers. It's a shame that gcc
- * doesn't guess this by itself.
- */
-#include <asm/types.h>
-typedef struct { volatile u32 offset[4096]; } __regbase;
-# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
-# define __REG(x) __REGP(io_p2v(x))
-#endif
-
-/* Let's kick gcc's ass again... */
-# define __REG2(x,y) \
- ( __builtin_constant_p(y) ? (__REG((x) + (y))) \
- : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
-
-# define __PREG(x) (io_v2p((u32)&(x)))
-
-#else
-
-# define __REG(x) io_p2v(x)
-# define __PREG(x) io_v2p(x)
-
-# undef io_p2v
-# undef __REG
-# ifndef __ASSEMBLY__
-# define io_p2v(PhAdd) (PhAdd)
-# define __REG(x) (*((volatile u32 *)io_p2v(x)))
-# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
-# else
-# define __REG(x) (x)
-# ifdef CONFIG_CPU_MONAHANS /* Hack to make this work with mona's pxa-regs.h */
-# define __REG_2(x) (x)
-# define __REG_3(x) (x)
-# endif
-# endif
-#endif /* UBOOT_REG_FIX */
-
#include "pxa-regs.h"
#ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/arch-pxa/pxa-regs.h b/arch/arm/include/asm/arch-pxa/pxa-regs.h
index d442fb0..65a387f 100644
--- a/arch/arm/include/asm/arch-pxa/pxa-regs.h
+++ b/arch/arm/include/asm/arch-pxa/pxa-regs.h
@@ -93,42 +93,42 @@ typedef void (*ExcpHndlr) (void) ;
/*
* DMA Controller
*/
-#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */
-#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */
-#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */
-#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */
-#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */
-#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */
-#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */
-#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */
-#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */
-#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */
-#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */
-#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */
-#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */
-#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */
-#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */
-#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */
-#ifdef CONFIG_CPU_MONAHANS
-#define DCSR16 __REG(0x40000040) /* DMA Control / Status Register for Channel 16 */
-#define DCSR17 __REG(0x40000044) /* DMA Control / Status Register for Channel 17 */
-#define DCSR18 __REG(0x40000048) /* DMA Control / Status Register for Channel 18 */
-#define DCSR19 __REG(0x4000004c) /* DMA Control / Status Register for Channel 19 */
-#define DCSR20 __REG(0x40000050) /* DMA Control / Status Register for Channel 20 */
-#define DCSR21 __REG(0x40000054) /* DMA Control / Status Register for Channel 21 */
-#define DCSR22 __REG(0x40000058) /* DMA Control / Status Register for Channel 22 */
-#define DCSR23 __REG(0x4000005c) /* DMA Control / Status Register for Channel 23 */
-#define DCSR24 __REG(0x40000060) /* DMA Control / Status Register for Channel 24 */
-#define DCSR25 __REG(0x40000064) /* DMA Control / Status Register for Channel 25 */
-#define DCSR26 __REG(0x40000068) /* DMA Control / Status Register for Channel 26 */
-#define DCSR27 __REG(0x4000006c) /* DMA Control / Status Register for Channel 27 */
-#define DCSR28 __REG(0x40000070) /* DMA Control / Status Register for Channel 28 */
-#define DCSR29 __REG(0x40000074) /* DMA Control / Status Register for Channel 29 */
-#define DCSR30 __REG(0x40000078) /* DMA Control / Status Register for Channel 30 */
-#define DCSR31 __REG(0x4000007c) /* DMA Control / Status Register for Channel 31 */
-#endif /* CONFIG_CPU_MONAHANS */
-
-#define DCSR(x) __REG2(0x40000000, (x) << 2)
+#define DCSR0 0x40000000 /* DMA Control / Status Register for Channel 0 */
+#define DCSR1 0x40000004 /* DMA Control / Status Register for Channel 1 */
+#define DCSR2 0x40000008 /* DMA Control / Status Register for Channel 2 */
+#define DCSR3 0x4000000c /* DMA Control / Status Register for Channel 3 */
+#define DCSR4 0x40000010 /* DMA Control / Status Register for Channel 4 */
+#define DCSR5 0x40000014 /* DMA Control / Status Register for Channel 5 */
+#define DCSR6 0x40000018 /* DMA Control / Status Register for Channel 6 */
+#define DCSR7 0x4000001c /* DMA Control / Status Register for Channel 7 */
+#define DCSR8 0x40000020 /* DMA Control / Status Register for Channel 8 */
+#define DCSR9 0x40000024 /* DMA Control / Status Register for Channel 9 */
+#define DCSR10 0x40000028 /* DMA Control / Status Register for Channel 10 */
+#define DCSR11 0x4000002c /* DMA Control / Status Register for Channel 11 */
+#define DCSR12 0x40000030 /* DMA Control / Status Register for Channel 12 */
+#define DCSR13 0x40000034 /* DMA Control / Status Register for Channel 13 */
+#define DCSR14 0x40000038 /* DMA Control / Status Register for Channel 14 */
+#define DCSR15 0x4000003c /* DMA Control / Status Register for Channel 15 */
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define DCSR16 0x40000040 /* DMA Control / Status Register for Channel 16 */
+#define DCSR17 0x40000044 /* DMA Control / Status Register for Channel 17 */
+#define DCSR18 0x40000048 /* DMA Control / Status Register for Channel 18 */
+#define DCSR19 0x4000004c /* DMA Control / Status Register for Channel 19 */
+#define DCSR20 0x40000050 /* DMA Control / Status Register for Channel 20 */
+#define DCSR21 0x40000054 /* DMA Control / Status Register for Channel 21 */
+#define DCSR22 0x40000058 /* DMA Control / Status Register for Channel 22 */
+#define DCSR23 0x4000005c /* DMA Control / Status Register for Channel 23 */
+#define DCSR24 0x40000060 /* DMA Control / Status Register for Channel 24 */
+#define DCSR25 0x40000064 /* DMA Control / Status Register for Channel 25 */
+#define DCSR26 0x40000068 /* DMA Control / Status Register for Channel 26 */
+#define DCSR27 0x4000006c /* DMA Control / Status Register for Channel 27 */
+#define DCSR28 0x40000070 /* DMA Control / Status Register for Channel 28 */
+#define DCSR29 0x40000074 /* DMA Control / Status Register for Channel 29 */
+#define DCSR30 0x40000078 /* DMA Control / Status Register for Channel 30 */
+#define DCSR31 0x4000007c /* DMA Control / Status Register for Channel 31 */
+#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+
+#define DCSR(x) (0x40000000 | ((x) << 2))
#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
@@ -150,52 +150,52 @@ typedef void (*ExcpHndlr) (void) ;
#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
-#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
-
-#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */
-#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */
-#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */
-#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */
-#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */
-#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */
-#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */
-#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */
-#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */
-#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */
-#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */
-#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */
-#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */
-#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */
-#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */
-#define DRCMR15 __REG(0x4000013c) /* Reserved */
-#define DRCMR16 __REG(0x40000140) /* Reserved */
-#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */
-#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */
-#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */
-#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */
-#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */
-#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */
-#define DRCMR23 __REG(0x4000015c) /* Reserved */
-#define DRCMR24 __REG(0x40000160) /* Reserved */
-#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */
-#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */
-#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */
-#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */
-#define DRCMR29 __REG(0x40000174) /* Reserved */
-#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */
-#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */
-#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */
-#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */
-#define DRCMR34 __REG(0x40000188) /* Reserved */
-#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */
-#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */
-#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */
-#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */
-#define DRCMR39 __REG(0x4000019C) /* Reserved */
-
-#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */
-#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */
-#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */
+#define DINT 0x400000f0 /* DMA Interrupt Register */
+
+#define DRCMR0 0x40000100 /* Request to Channel Map Register for DREQ 0 */
+#define DRCMR1 0x40000104 /* Request to Channel Map Register for DREQ 1 */
+#define DRCMR2 0x40000108 /* Request to Channel Map Register for I2S receive Request */
+#define DRCMR3 0x4000010c /* Request to Channel Map Register for I2S transmit Request */
+#define DRCMR4 0x40000110 /* Request to Channel Map Register for BTUART receive Request */
+#define DRCMR5 0x40000114 /* Request to Channel Map Register for BTUART transmit Request. */
+#define DRCMR6 0x40000118 /* Request to Channel Map Register for FFUART receive Request */
+#define DRCMR7 0x4000011c /* Request to Channel Map Register for FFUART transmit Request */
+#define DRCMR8 0x40000120 /* Request to Channel Map Register for AC97 microphone Request */
+#define DRCMR9 0x40000124 /* Request to Channel Map Register for AC97 modem receive Request */
+#define DRCMR10 0x40000128 /* Request to Channel Map Register for AC97 modem transmit Request */
+#define DRCMR11 0x4000012c /* Request to Channel Map Register for AC97 audio receive Request */
+#define DRCMR12 0x40000130 /* Request to Channel Map Register for AC97 audio transmit Request */
+#define DRCMR13 0x40000134 /* Request to Channel Map Register for SSP receive Request */
+#define DRCMR14 0x40000138 /* Request to Channel Map Register for SSP transmit Request */
+#define DRCMR15 0x4000013c /* Reserved */
+#define DRCMR16 0x40000140 /* Reserved */
+#define DRCMR17 0x40000144 /* Request to Channel Map Register for ICP receive Request */
+#define DRCMR18 0x40000148 /* Request to Channel Map Register for ICP transmit Request */
+#define DRCMR19 0x4000014c /* Request to Channel Map Register for STUART receive Request */
+#define DRCMR20 0x40000150 /* Request to Channel Map Register for STUART transmit Request */
+#define DRCMR21 0x40000154 /* Request to Channel Map Register for MMC receive Request */
+#define DRCMR22 0x40000158 /* Request to Channel Map Register for MMC transmit Request */
+#define DRCMR23 0x4000015c /* Reserved */
+#define DRCMR24 0x40000160 /* Reserved */
+#define DRCMR25 0x40000164 /* Request to Channel Map Register for USB endpoint 1 Request */
+#define DRCMR26 0x40000168 /* Request to Channel Map Register for USB endpoint 2 Request */
+#define DRCMR27 0x4000016C /* Request to Channel Map Register for USB endpoint 3 Request */
+#define DRCMR28 0x40000170 /* Request to Channel Map Register for USB endpoint 4 Request */
+#define DRCMR29 0x40000174 /* Reserved */
+#define DRCMR30 0x40000178 /* Request to Channel Map Register for USB endpoint 6 Request */
+#define DRCMR31 0x4000017C /* Request to Channel Map Register for USB endpoint 7 Request */
+#define DRCMR32 0x40000180 /* Request to Channel Map Register for USB endpoint 8 Request */
+#define DRCMR33 0x40000184 /* Request to Channel Map Register for USB endpoint 9 Request */
+#define DRCMR34 0x40000188 /* Reserved */
+#define DRCMR35 0x4000018C /* Request to Channel Map Register for USB endpoint 11 Request */
+#define DRCMR36 0x40000190 /* Request to Channel Map Register for USB endpoint 12 Request */
+#define DRCMR37 0x40000194 /* Request to Channel Map Register for USB endpoint 13 Request */
+#define DRCMR38 0x40000198 /* Request to Channel Map Register for USB endpoint 14 Request */
+#define DRCMR39 0x4000019C /* Reserved */
+
+#define DRCMR68 0x40001110 /* Request to Channel Map Register for Camera FIFO 0 Request */
+#define DRCMR69 0x40001114 /* Request to Channel Map Register for Camera FIFO 1 Request */
+#define DRCMR70 0x40001118 /* Request to Channel Map Register for Camera FIFO 2 Request */
#define DRCMRRXSADR DRCMR2
#define DRCMRTXSADR DRCMR3
@@ -220,75 +220,75 @@ typedef void (*ExcpHndlr) (void) ;
#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
#define DRCMR_CHLNUM 0x0f /* mask for Channel Number (read / write) */
-#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */
-#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */
-#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */
-#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */
-#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */
-#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */
-#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */
-#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */
-#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */
-#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */
-#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */
-#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */
-#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */
-#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */
-#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */
-#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */
-#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */
-#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */
-#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */
-#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */
-#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */
-#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */
-#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */
-#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */
-#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */
-#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */
-#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */
-#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */
-#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */
-#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */
-#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */
-#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */
-#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */
-#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */
-#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */
-#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */
-#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */
-#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */
-#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */
-#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */
-#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */
-#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */
-#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */
-#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */
-#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */
-#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */
-#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */
-#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */
-#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */
-#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */
-#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */
-#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */
-#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */
-#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */
-#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */
-#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */
-#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */
-#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */
-#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */
-#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */
-#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */
-#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */
-#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */
-#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */
-
-#define DDADR(x) __REG2(0x40000200, (x) << 4)
-#define DSADR(x) __REG2(0x40000204, (x) << 4)
-#define DTADR(x) __REG2(0x40000208, (x) << 4)
-#define DCMD(x) __REG2(0x4000020c, (x) << 4)
+#define DDADR0 0x40000200 /* DMA Descriptor Address Register Channel 0 */
+#define DSADR0 0x40000204 /* DMA Source Address Register Channel 0 */
+#define DTADR0 0x40000208 /* DMA Target Address Register Channel 0 */
+#define DCMD0 0x4000020c /* DMA Command Address Register Channel 0 */
+#define DDADR1 0x40000210 /* DMA Descriptor Address Register Channel 1 */
+#define DSADR1 0x40000214 /* DMA Source Address Register Channel 1 */
+#define DTADR1 0x40000218 /* DMA Target Address Register Channel 1 */
+#define DCMD1 0x4000021c /* DMA Command Address Register Channel 1 */
+#define DDADR2 0x40000220 /* DMA Descriptor Address Register Channel 2 */
+#define DSADR2 0x40000224 /* DMA Source Address Register Channel 2 */
+#define DTADR2 0x40000228 /* DMA Target Address Register Channel 2 */
+#define DCMD2 0x4000022c /* DMA Command Address Register Channel 2 */
+#define DDADR3 0x40000230 /* DMA Descriptor Address Register Channel 3 */
+#define DSADR3 0x40000234 /* DMA Source Address Register Channel 3 */
+#define DTADR3 0x40000238 /* DMA Target Address Register Channel 3 */
+#define DCMD3 0x4000023c /* DMA Command Address Register Channel 3 */
+#define DDADR4 0x40000240 /* DMA Descriptor Address Register Channel 4 */
+#define DSADR4 0x40000244 /* DMA Source Address Register Channel 4 */
+#define DTADR4 0x40000248 /* DMA Target Address Register Channel 4 */
+#define DCMD4 0x4000024c /* DMA Command Address Register Channel 4 */
+#define DDADR5 0x40000250 /* DMA Descriptor Address Register Channel 5 */
+#define DSADR5 0x40000254 /* DMA Source Address Register Channel 5 */
+#define DTADR5 0x40000258 /* DMA Target Address Register Channel 5 */
+#define DCMD5 0x4000025c /* DMA Command Address Register Channel 5 */
+#define DDADR6 0x40000260 /* DMA Descriptor Address Register Channel 6 */
+#define DSADR6 0x40000264 /* DMA Source Address Register Channel 6 */
+#define DTADR6 0x40000268 /* DMA Target Address Register Channel 6 */
+#define DCMD6 0x4000026c /* DMA Command Address Register Channel 6 */
+#define DDADR7 0x40000270 /* DMA Descriptor Address Register Channel 7 */
+#define DSADR7 0x40000274 /* DMA Source Address Register Channel 7 */
+#define DTADR7 0x40000278 /* DMA Target Address Register Channel 7 */
+#define DCMD7 0x4000027c /* DMA Command Address Register Channel 7 */
+#define DDADR8 0x40000280 /* DMA Descriptor Address Register Channel 8 */
+#define DSADR8 0x40000284 /* DMA Source Address Register Channel 8 */
+#define DTADR8 0x40000288 /* DMA Target Address Register Channel 8 */
+#define DCMD8 0x4000028c /* DMA Command Address Register Channel 8 */
+#define DDADR9 0x40000290 /* DMA Descriptor Address Register Channel 9 */
+#define DSADR9 0x40000294 /* DMA Source Address Register Channel 9 */
+#define DTADR9 0x40000298 /* DMA Target Address Register Channel 9 */
+#define DCMD9 0x4000029c /* DMA Command Address Register Channel 9 */
+#define DDADR10 0x400002a0 /* DMA Descriptor Address Register Channel 10 */
+#define DSADR10 0x400002a4 /* DMA Source Address Register Channel 10 */
+#define DTADR10 0x400002a8 /* DMA Target Address Register Channel 10 */
+#define DCMD10 0x400002ac /* DMA Command Address Register Channel 10 */
+#define DDADR11 0x400002b0 /* DMA Descriptor Address Register Channel 11 */
+#define DSADR11 0x400002b4 /* DMA Source Address Register Channel 11 */
+#define DTADR11 0x400002b8 /* DMA Target Address Register Channel 11 */
+#define DCMD11 0x400002bc /* DMA Command Address Register Channel 11 */
+#define DDADR12 0x400002c0 /* DMA Descriptor Address Register Channel 12 */
+#define DSADR12 0x400002c4 /* DMA Source Address Register Channel 12 */
+#define DTADR12 0x400002c8 /* DMA Target Address Register Channel 12 */
+#define DCMD12 0x400002cc /* DMA Command Address Register Channel 12 */
+#define DDADR13 0x400002d0 /* DMA Descriptor Address Register Channel 13 */
+#define DSADR13 0x400002d4 /* DMA Source Address Register Channel 13 */
+#define DTADR13 0x400002d8 /* DMA Target Address Register Channel 13 */
+#define DCMD13 0x400002dc /* DMA Command Address Register Channel 13 */
+#define DDADR14 0x400002e0 /* DMA Descriptor Address Register Channel 14 */
+#define DSADR14 0x400002e4 /* DMA Source Address Register Channel 14 */
+#define DTADR14 0x400002e8 /* DMA Target Address Register Channel 14 */
+#define DCMD14 0x400002ec /* DMA Command Address Register Channel 14 */
+#define DDADR15 0x400002f0 /* DMA Descriptor Address Register Channel 15 */
+#define DSADR15 0x400002f4 /* DMA Source Address Register Channel 15 */
+#define DTADR15 0x400002f8 /* DMA Target Address Register Channel 15 */
+#define DCMD15 0x400002fc /* DMA Command Address Register Channel 15 */
+
+#define DDADR(x) (0x40000200 | ((x) << 4))
+#define DSADR(x) (0x40000204 | ((x) << 4))
+#define DTADR(x) (0x40000208 | ((x) << 4))
+#define DCMD(x) (0x4000020c | ((x) << 4))
#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
#define DDADR_STOP (1 << 0) /* Stop (read / write) */
@@ -313,56 +313,57 @@ typedef void (*ExcpHndlr) (void) ;
#define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
#define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4)
+/******************************************************************************/
/*
* UARTs
*/
/* Full Function UART (FFUART) */
#define FFUART FFRBR
-#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
-#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
-#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
-#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
-#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
-#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
-#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
-#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
-#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
-#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
-#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
-#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+#define FFRBR 0x40100000 /* Receive Buffer Register (read only) */
+#define FFTHR 0x40100000 /* Transmit Holding Register (write only) */
+#define FFIER 0x40100004 /* Interrupt Enable Register (read/write) */
+#define FFIIR 0x40100008 /* Interrupt ID Register (read only) */
+#define FFFCR 0x40100008 /* FIFO Control Register (write only) */
+#define FFLCR 0x4010000C /* Line Control Register (read/write) */
+#define FFMCR 0x40100010 /* Modem Control Register (read/write) */
+#define FFLSR 0x40100014 /* Line Status Register (read only) */
+#define FFMSR 0x40100018 /* Modem Status Register (read only) */
+#define FFSPR 0x4010001C /* Scratch Pad Register (read/write) */
+#define FFISR 0x40100020 /* Infrared Selection Register (read/write) */
+#define FFDLL 0x40100000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH 0x40100004 /* Divisor Latch High Register (DLAB = 1) (read/write) */
/* Bluetooth UART (BTUART) */
#define BTUART BTRBR
-#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
-#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
-#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
-#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
-#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
-#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
-#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
-#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
-#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
-#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
-#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
-#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+#define BTRBR 0x40200000 /* Receive Buffer Register (read only) */
+#define BTTHR 0x40200000 /* Transmit Holding Register (write only) */
+#define BTIER 0x40200004 /* Interrupt Enable Register (read/write) */
+#define BTIIR 0x40200008 /* Interrupt ID Register (read only) */
+#define BTFCR 0x40200008 /* FIFO Control Register (write only) */
+#define BTLCR 0x4020000C /* Line Control Register (read/write) */
+#define BTMCR 0x40200010 /* Modem Control Register (read/write) */
+#define BTLSR 0x40200014 /* Line Status Register (read only) */
+#define BTMSR 0x40200018 /* Modem Status Register (read only) */
+#define BTSPR 0x4020001C /* Scratch Pad Register (read/write) */
+#define BTISR 0x40200020 /* Infrared Selection Register (read/write) */
+#define BTDLL 0x40200000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH 0x40200004 /* Divisor Latch High Register (DLAB = 1) (read/write) */
/* Standard UART (STUART) */
#define STUART STRBR
-#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
-#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
-#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
-#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
-#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
-#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
-#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
-#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
-#define STMSR __REG(0x40700018) /* Reserved */
-#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
-#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
-#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+#define STRBR 0x40700000 /* Receive Buffer Register (read only) */
+#define STTHR 0x40700000 /* Transmit Holding Register (write only) */
+#define STIER 0x40700004 /* Interrupt Enable Register (read/write) */
+#define STIIR 0x40700008 /* Interrupt ID Register (read only) */
+#define STFCR 0x40700008 /* FIFO Control Register (write only) */
+#define STLCR 0x4070000C /* Line Control Register (read/write) */
+#define STMCR 0x40700010 /* Modem Control Register (read/write) */
+#define STLSR 0x40700014 /* Line Status Register (read only) */
+#define STMSR 0x40700018 /* Reserved */
+#define STSPR 0x4070001C /* Scratch Pad Register (read/write) */
+#define STISR 0x40700020 /* Infrared Selection Register (read/write) */
+#define STDLL 0x40700000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH 0x40700004 /* Divisor Latch High Register (DLAB = 1) (read/write) */
#define IER_DMAE (1 << 7) /* DMA Requests Enable */
#define IER_UUE (1 << 6) /* UART Unit Enable */
@@ -408,7 +409,7 @@ typedef void (*ExcpHndlr) (void) ;
#define LSR_OE (1 << 1) /* Overrun Error */
#define LSR_DR (1 << 0) /* Data Ready */
-#define MCR_LOOP (1 << 4) */
+#define MCR_LOOP (1 << 4) /* */
#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
#define MCR_RTS (1 << 1) /* Request to Send */
@@ -423,6 +424,7 @@ typedef void (*ExcpHndlr) (void) ;
#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
+/******************************************************************************/
/*
* IrSR (Infrared Selection Register)
*/
@@ -456,17 +458,25 @@ typedef void (*ExcpHndlr) (void) ;
/*
* I2C registers
*/
-#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */
-#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */
-#define ICR __REG(0x40301690) /* I2C Control Register - ICR */
-#define ISR __REG(0x40301698) /* I2C Status Register - ISR */
-#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */
-
-#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */
-#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */
-#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */
-#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */
-#define PWRISAR __REG(0x40f001A0) /* Power I2C Slave Address Register-ISAR */
+#define IBMR 0x40301680 /* I2C Bus Monitor Register - IBMR */
+#define IDBR 0x40301688 /* I2C Data Buffer Register - IDBR */
+#define ICR 0x40301690 /* I2C Control Register - ICR */
+#define ISR 0x40301698 /* I2C Status Register - ISR */
+#define ISAR 0x403016A0 /* I2C Slave Address Register - ISAR */
+
+#ifdef CONFIG_CPU_MONAHANS
+#define PWRIBMR 0x40f500C0 /* Power I2C Bus Monitor Register-IBMR */
+#define PWRIDBR 0x40f500C4 /* Power I2C Data Buffer Register-IDBR */
+#define PWRICR 0x40f500C8 /* Power I2C Control Register - ICR */
+#define PWRISR 0x40f500CC /* Power I2C Status Register - ISR */
+#define PWRISAR 0x40f500D0 /* Power I2C Slave Address Register-ISAR */
+#else
+#define PWRIBMR 0x40f00180 /* Power I2C Bus Monitor Register-IBMR */
+#define PWRIDBR 0x40f00188 /* Power I2C Data Buffer Register-IDBR */
+#define PWRICR 0x40f00190 /* Power I2C Control Register - ICR */
+#define PWRISR 0x40f00198 /* Power I2C Status Register - ISR */
+#define PWRISAR 0x40f001A0 /* Power I2C Slave Address Register-ISAR */
+#endif
/* ----- Control register bits ---------------------------------------- */
@@ -507,28 +517,27 @@ typedef void (*ExcpHndlr) (void) ;
/* FIXME the audio defines collide w/ the SA1111 defines. I don't like these
* short defines because there is too much chance of namespace collision
*/
-/*#define SACR0 __REG(0x40400000) / Global Control Register */
-/*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */
-/*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
-/*#define SAIMR __REG(0x40400014) / Serial Audio Interrupt Mask Register */
-/*#define SAICR __REG(0x40400018) / Serial Audio Interrupt Clear Register */
-/*#define SADIV __REG(0x40400060) / Audio Clock Divider Register. */
-/*#define SADR __REG(0x40400080) / Serial Audio Data Register (TX and RX FIFO access Register). */
-
+#define SACR0 0x40400000 /* Global Control Register */
+#define SACR1 0x40400004 /* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0 0x4040000C /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR 0x40400014 /* Serial Audio Interrupt Mask Register */
+#define SAICR 0x40400018 /* Serial Audio Interrupt Clear Register */
+#define SADIV 0x40400060 /* Audio Clock Divider Register. */
+#define SADR 0x40400080 /* Serial Audio Data Register (TX and RX FIFO access Register). */
/*
* AC97 Controller registers
*/
-#define POCR __REG(0x40500000) /* PCM Out Control Register */
+#define POCR 0x40500000 /* PCM Out Control Register */
#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define PICR __REG(0x40500004) /* PCM In Control Register */
+#define PICR 0x40500004 /* PCM In Control Register */
#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define MCCR __REG(0x40500008) /* Mic In Control Register */
+#define MCCR 0x40500008 /* Mic In Control Register */
#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define GCR __REG(0x4050000C) /* Global Control Register */
+#define GCR 0x4050000C /* Global Control Register */
#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
@@ -540,16 +549,16 @@ typedef void (*ExcpHndlr) (void) ;
#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
-#define POSR __REG(0x40500010) /* PCM Out Status Register */
+#define POSR 0x40500010 /* PCM Out Status Register */
#define POSR_FIFOE (1 << 4) /* FIFO error */
-#define PISR __REG(0x40500014) /* PCM In Status Register */
+#define PISR 0x40500014 /* PCM In Status Register */
#define PISR_FIFOE (1 << 4) /* FIFO error */
-#define MCSR __REG(0x40500018) /* Mic In Status Register */
+#define MCSR 0x40500018 /* Mic In Status Register */
#define MCSR_FIFOE (1 << 4) /* FIFO error */
-#define GSR __REG(0x4050001C) /* Global Status Register */
+#define GSR 0x4050001C /* Global Status Register */
#define GSR_CDONE (1 << 19) /* Command Done */
#define GSR_SDONE (1 << 18) /* Status Done */
#define GSR_RDCS (1 << 15) /* Read Completion Status */
@@ -567,38 +576,38 @@ typedef void (*ExcpHndlr) (void) ;
#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
-#define CAR __REG(0x40500020) /* CODEC Access Register */
+#define CAR 0x40500020 /* CODEC Access Register */
#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
-#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
-#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
+#define PCDR 0x40500040 /* PCM FIFO Data Register */
+#define MCDR 0x40500060 /* Mic-in FIFO Data Register */
-#define MOCR __REG(0x40500100) /* Modem Out Control Register */
+#define MOCR 0x40500100 /* Modem Out Control Register */
#define MOCR_FEIE (1 << 3) /* FIFO Error */
-#define MICR __REG(0x40500108) /* Modem In Control Register */
+#define MICR 0x40500108 /* Modem In Control Register */
#define MICR_FEIE (1 << 3) /* FIFO Error */
-#define MOSR __REG(0x40500110) /* Modem Out Status Register */
+#define MOSR 0x40500110 /* Modem Out Status Register */
#define MOSR_FIFOE (1 << 4) /* FIFO error */
-#define MISR __REG(0x40500118) /* Modem In Status Register */
+#define MISR 0x40500118 /* Modem In Status Register */
#define MISR_FIFOE (1 << 4) /* FIFO error */
-#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
+#define MODR 0x40500140 /* Modem FIFO Data Register */
-#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
-#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
-#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
-#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
+#define PAC_REG_BASE 0x40500200 /* Primary Audio Codec */
+#define SAC_REG_BASE 0x40500300 /* Secondary Audio Codec */
+#define PMC_REG_BASE 0x40500400 /* Primary Modem Codec */
+#define SMC_REG_BASE 0x40500500 /* Secondary Modem Codec */
/*
* USB Device Controller
*/
-#ifdef CONFIG_PXA27X
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-#define UDCCR __REG(0x40600000) /* UDC Control Register */
+#define UDCCR 0x40600000 /* UDC Control Register */
#define UDCCR_UDE (1 << 0) /* UDC enable */
#define UDCCR_UDA (1 << 1) /* UDC active */
#define UDCCR_RSM (1 << 2) /* Device resume */
@@ -623,7 +632,7 @@ typedef void (*ExcpHndlr) (void) ;
#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface Setting Number */
#define UDCCR_AAISN_S 5
-#define UDCCS0 __REG(0x40600100) /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0 0x40600100 /* UDC Endpoint 0 Control/Status Register */
#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
#define UDCCS0_IPR (1 << 1) /* IN packet ready */
#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
@@ -634,9 +643,9 @@ typedef void (*ExcpHndlr) (void) ;
#define UDCCS0_SA (1 << 7) /* Setup active */
/* Bulk IN - Endpoint 1,6,11 */
-#define UDCCS1 __REG(0x40600104) /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */
+#define UDCCS1 0x40600104 /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS6 0x40600028 /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS11 0x4060003C /* UDC Endpoint 11 (IN) Control/Status Register */
#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
@@ -647,9 +656,9 @@ typedef void (*ExcpHndlr) (void) ;
#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
/* Bulk OUT - Endpoint 2,7,12 */
-#define UDCCS2 __REG(0x40600108) /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */
+#define UDCCS2 0x40600108 /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7 0x4060002C /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS12 0x40600040 /* UDC Endpoint 12 (OUT) Control/Status Register */
#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
@@ -660,9 +669,9 @@ typedef void (*ExcpHndlr) (void) ;
#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
/* Isochronous IN - Endpoint 3,8,13 */
-#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */
+#define UDCCS3 0x4060001C /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8 0x40600030 /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS13 0x40600044 /* UDC Endpoint 13 (IN) Control/Status Register */
#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
@@ -671,9 +680,9 @@ typedef void (*ExcpHndlr) (void) ;
#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
/* Isochronous OUT - Endpoint 4,9,14 */
-#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */
+#define UDCCS4 0x40600020 /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9 0x40600034 /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS14 0x40600048 /* UDC Endpoint 14 (OUT) Control/Status Register */
#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
@@ -683,9 +692,9 @@ typedef void (*ExcpHndlr) (void) ;
#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
/* Interrupt IN - Endpoint 5,10,15 */
-#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+#define UDCCS5 0x40600024 /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10 0x40600038 /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS15 0x4060004C /* UDC Endpoint 15 (Interrupt) Control/Status Register */
#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
@@ -695,32 +704,32 @@ typedef void (*ExcpHndlr) (void) ;
#define UDCCS_INT_FST (1 << 5) /* Force stall */
#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
-#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */
-#define UFNRL __REG(0x40600014) /* UDC Frame Number Register Low */
-#define UBCR2 __REG(0x40600208) /* UDC Byte Count Reg 2 */
-#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */
-#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */
-#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */
-#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */
-#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */
-#define UDDR0 __REG(0x40600300) /* UDC Endpoint 0 Data Register */
-#define UDDR1 __REG(0x40600304) /* UDC Endpoint 1 Data Register */
-#define UDDR2 __REG(0x40600308) /* UDC Endpoint 2 Data Register */
-#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */
-#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */
-#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */
-#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */
-#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */
-#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */
-#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */
-#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */
-#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */
-#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */
-#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */
-#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */
-#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */
-
-#define UICR0 __REG(0x40600004) /* UDC Interrupt Control Register 0 */
+#define UFNRH 0x40600060 /* UDC Frame Number Register High */
+#define UFNRL 0x40600014 /* UDC Frame Number Register Low */
+#define UBCR2 0x40600208 /* UDC Byte Count Reg 2 */
+#define UBCR4 0x4060006c /* UDC Byte Count Reg 4 */
+#define UBCR7 0x40600070 /* UDC Byte Count Reg 7 */
+#define UBCR9 0x40600074 /* UDC Byte Count Reg 9 */
+#define UBCR12 0x40600078 /* UDC Byte Count Reg 12 */
+#define UBCR14 0x4060007c /* UDC Byte Count Reg 14 */
+#define UDDR0 0x40600300 /* UDC Endpoint 0 Data Register */
+#define UDDR1 0x40600304 /* UDC Endpoint 1 Data Register */
+#define UDDR2 0x40600308 /* UDC Endpoint 2 Data Register */
+#define UDDR3 0x40600200 /* UDC Endpoint 3 Data Register */
+#define UDDR4 0x40600400 /* UDC Endpoint 4 Data Register */
+#define UDDR5 0x406000A0 /* UDC Endpoint 5 Data Register */
+#define UDDR6 0x40600600 /* UDC Endpoint 6 Data Register */
+#define UDDR7 0x40600680 /* UDC Endpoint 7 Data Register */
+#define UDDR8 0x40600700 /* UDC Endpoint 8 Data Register */
+#define UDDR9 0x40600900 /* UDC Endpoint 9 Data Register */
+#define UDDR10 0x406000C0 /* UDC Endpoint 10 Data Register */
+#define UDDR11 0x40600B00 /* UDC Endpoint 11 Data Register */
+#define UDDR12 0x40600B80 /* UDC Endpoint 12 Data Register */
+#define UDDR13 0x40600C00 /* UDC Endpoint 13 Data Register */
+#define UDDR14 0x40600E00 /* UDC Endpoint 14 Data Register */
+#define UDDR15 0x406000E0 /* UDC Endpoint 15 Data Register */
+
+#define UICR0 0x40600004 /* UDC Interrupt Control Register 0 */
#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
@@ -731,7 +740,7 @@ typedef void (*ExcpHndlr) (void) ;
#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
-#define UICR1 __REG(0x40600008) /* UDC Interrupt Control Register 1 */
+#define UICR1 0x40600008 /* UDC Interrupt Control Register 1 */
#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
@@ -742,7 +751,7 @@ typedef void (*ExcpHndlr) (void) ;
#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
-#define USIR0 __REG(0x4060000C) /* UDC Status Interrupt Register 0 */
+#define USIR0 0x4060000C /* UDC Status Interrupt Register 0 */
#define USIR0_IR0 (1 << 0) /* Interrup request ep 0 */
#define USIR0_IR1 (1 << 2) /* Interrup request ep 1 */
@@ -753,7 +762,7 @@ typedef void (*ExcpHndlr) (void) ;
#define USIR0_IR6 (1 << 6) /* Interrup request ep 6 */
#define USIR0_IR7 (1 << 7) /* Interrup request ep 7 */
-#define USIR1 __REG(0x40600010) /* UDC Status Interrupt Register 1 */
+#define USIR1 0x40600010 /* UDC Status Interrupt Register 1 */
#define USIR1_IR8 (1 << 0) /* Interrup request ep 8 */
#define USIR1_IR9 (1 << 1) /* Interrup request ep 9 */
@@ -765,8 +774,8 @@ typedef void (*ExcpHndlr) (void) ;
#define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */
-#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */
-#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */
+#define UDCICR0 0x40600004 /* UDC Interrupt Control Register0 */
+#define UDCICR1 0x40600008 /* UDC Interrupt Control Register1 */
#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
@@ -777,8 +786,8 @@ typedef void (*ExcpHndlr) (void) ;
#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
-#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
-#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+#define UDCISR0 0x4060000C /* UDC Interrupt Status Register 0 */
+#define UDCISR1 0x40600010 /* UDC Interrupt Status Register 1 */
#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCISR1_IRCC (1 << 31) /* IntEn - Configuration Change */
#define UDCISR1_IRSOF (1 << 30) /* IntEn - Start of Frame */
@@ -787,8 +796,8 @@ typedef void (*ExcpHndlr) (void) ;
#define UDCISR1_IRRS (1 << 27) /* IntEn - Reset */
-#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
-#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
+#define UDCFNR 0x40600014 /* UDC Frame Number Register */
+#define UDCOTGICR 0x40600018 /* UDC On-The-Go interrupt control */
#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt Rising Edge Interrupt Enable */
#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt Falling Edge Interrupt Enable */
@@ -804,7 +813,7 @@ typedef void (*ExcpHndlr) (void) ;
#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge Interrupt Enable */
#define UDCCSN(x) __REG2(0x40600100, (x) << 2)
-#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+#define UDCCSR0 0x40600100 /* UDC Control/Status register - Endpoint 0 */
#define UDCCSR0_SA (1 << 7) /* Setup Active */
#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
@@ -815,29 +824,29 @@ typedef void (*ExcpHndlr) (void) ;
#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
-#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
-#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
-#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
-#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
-#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
-#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
-#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
-#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
-#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
-#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
-#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
-#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
-#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
-#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
-#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
-#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
-#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
-#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
-#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
-#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
-#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
-#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
-#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
+#define UDCCSRA 0x40600104 /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB 0x40600108 /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC 0x4060010C /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD 0x40600110 /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE 0x40600114 /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF 0x40600118 /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG 0x4060011C /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH 0x40600120 /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI 0x40600124 /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ 0x40600128 /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK 0x4060012C /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL 0x40600130 /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM 0x40600134 /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN 0x40600138 /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP 0x4060013C /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ 0x40600140 /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR 0x40600144 /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS 0x40600148 /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT 0x4060014C /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU 0x40600150 /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV 0x40600154 /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW 0x40600158 /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX 0x4060015C /* UDC Control/Status register - Endpoint X */
#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
@@ -852,81 +861,81 @@ typedef void (*ExcpHndlr) (void) ;
#define UDCCSR_FS (1 << 0) /* FIFO needs service */
#define UDCBCN(x) __REG2(0x40600200, (x)<<2)
-#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */
-#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */
-#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */
-#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */
-#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */
-#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */
-#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */
-#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */
-#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */
-#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */
-#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */
-#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */
-#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */
-#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */
-#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */
-#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */
-#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */
-#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */
-#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */
-#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */
-#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */
-#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */
-#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */
-#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */
+#define UDCBCR0 0x40600200 /* Byte Count Register - EP0 */
+#define UDCBCRA 0x40600204 /* Byte Count Register - EPA */
+#define UDCBCRB 0x40600208 /* Byte Count Register - EPB */
+#define UDCBCRC 0x4060020C /* Byte Count Register - EPC */
+#define UDCBCRD 0x40600210 /* Byte Count Register - EPD */
+#define UDCBCRE 0x40600214 /* Byte Count Register - EPE */
+#define UDCBCRF 0x40600218 /* Byte Count Register - EPF */
+#define UDCBCRG 0x4060021C /* Byte Count Register - EPG */
+#define UDCBCRH 0x40600220 /* Byte Count Register - EPH */
+#define UDCBCRI 0x40600224 /* Byte Count Register - EPI */
+#define UDCBCRJ 0x40600228 /* Byte Count Register - EPJ */
+#define UDCBCRK 0x4060022C /* Byte Count Register - EPK */
+#define UDCBCRL 0x40600230 /* Byte Count Register - EPL */
+#define UDCBCRM 0x40600234 /* Byte Count Register - EPM */
+#define UDCBCRN 0x40600238 /* Byte Count Register - EPN */
+#define UDCBCRP 0x4060023C /* Byte Count Register - EPP */
+#define UDCBCRQ 0x40600240 /* Byte Count Register - EPQ */
+#define UDCBCRR 0x40600244 /* Byte Count Register - EPR */
+#define UDCBCRS 0x40600248 /* Byte Count Register - EPS */
+#define UDCBCRT 0x4060024C /* Byte Count Register - EPT */
+#define UDCBCRU 0x40600250 /* Byte Count Register - EPU */
+#define UDCBCRV 0x40600254 /* Byte Count Register - EPV */
+#define UDCBCRW 0x40600258 /* Byte Count Register - EPW */
+#define UDCBCRX 0x4060025C /* Byte Count Register - EPX */
#define UDCDN(x) __REG2(0x40600300, (x)<<2)
-#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */
-#define UDCDRA __REG(0x40600304) /* Data Register - EPA */
-#define UDCDRB __REG(0x40600308) /* Data Register - EPB */
-#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */
-#define UDCDRD __REG(0x40600310) /* Data Register - EPD */
-#define UDCDRE __REG(0x40600314) /* Data Register - EPE */
-#define UDCDRF __REG(0x40600318) /* Data Register - EPF */
-#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */
-#define UDCDRH __REG(0x40600320) /* Data Register - EPH */
-#define UDCDRI __REG(0x40600324) /* Data Register - EPI */
-#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */
-#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */
-#define UDCDRL __REG(0x40600330) /* Data Register - EPL */
-#define UDCDRM __REG(0x40600334) /* Data Register - EPM */
-#define UDCDRN __REG(0x40600338) /* Data Register - EPN */
-#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */
-#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */
-#define UDCDRR __REG(0x40600344) /* Data Register - EPR */
-#define UDCDRS __REG(0x40600348) /* Data Register - EPS */
-#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */
-#define UDCDRU __REG(0x40600350) /* Data Register - EPU */
-#define UDCDRV __REG(0x40600354) /* Data Register - EPV */
-#define UDCDRW __REG(0x40600358) /* Data Register - EPW */
-#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */
+#define UDCDR0 0x40600300 /* Data Register - EP0 */
+#define UDCDRA 0x40600304 /* Data Register - EPA */
+#define UDCDRB 0x40600308 /* Data Register - EPB */
+#define UDCDRC 0x4060030C /* Data Register - EPC */
+#define UDCDRD 0x40600310 /* Data Register - EPD */
+#define UDCDRE 0x40600314 /* Data Register - EPE */
+#define UDCDRF 0x40600318 /* Data Register - EPF */
+#define UDCDRG 0x4060031C /* Data Register - EPG */
+#define UDCDRH 0x40600320 /* Data Register - EPH */
+#define UDCDRI 0x40600324 /* Data Register - EPI */
+#define UDCDRJ 0x40600328 /* Data Register - EPJ */
+#define UDCDRK 0x4060032C /* Data Register - EPK */
+#define UDCDRL 0x40600330 /* Data Register - EPL */
+#define UDCDRM 0x40600334 /* Data Register - EPM */
+#define UDCDRN 0x40600338 /* Data Register - EPN */
+#define UDCDRP 0x4060033C /* Data Register - EPP */
+#define UDCDRQ 0x40600340 /* Data Register - EPQ */
+#define UDCDRR 0x40600344 /* Data Register - EPR */
+#define UDCDRS 0x40600348 /* Data Register - EPS */
+#define UDCDRT 0x4060034C /* Data Register - EPT */
+#define UDCDRU 0x40600350 /* Data Register - EPU */
+#define UDCDRV 0x40600354 /* Data Register - EPV */
+#define UDCDRW 0x40600358 /* Data Register - EPW */
+#define UDCDRX 0x4060035C /* Data Register - EPX */
#define UDCCN(x) __REG2(0x40600400, (x)<<2)
-#define UDCCRA __REG(0x40600404) /* Configuration register EPA */
-#define UDCCRB __REG(0x40600408) /* Configuration register EPB */
-#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */
-#define UDCCRD __REG(0x40600410) /* Configuration register EPD */
-#define UDCCRE __REG(0x40600414) /* Configuration register EPE */
-#define UDCCRF __REG(0x40600418) /* Configuration register EPF */
-#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */
-#define UDCCRH __REG(0x40600420) /* Configuration register EPH */
-#define UDCCRI __REG(0x40600424) /* Configuration register EPI */
-#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */
-#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */
-#define UDCCRL __REG(0x40600430) /* Configuration register EPL */
-#define UDCCRM __REG(0x40600434) /* Configuration register EPM */
-#define UDCCRN __REG(0x40600438) /* Configuration register EPN */
-#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */
-#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */
-#define UDCCRR __REG(0x40600444) /* Configuration register EPR */
-#define UDCCRS __REG(0x40600448) /* Configuration register EPS */
-#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */
-#define UDCCRU __REG(0x40600450) /* Configuration register EPU */
-#define UDCCRV __REG(0x40600454) /* Configuration register EPV */
-#define UDCCRW __REG(0x40600458) /* Configuration register EPW */
-#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */
+#define UDCCRA 0x40600404 /* Configuration register EPA */
+#define UDCCRB 0x40600408 /* Configuration register EPB */
+#define UDCCRC 0x4060040C /* Configuration register EPC */
+#define UDCCRD 0x40600410 /* Configuration register EPD */
+#define UDCCRE 0x40600414 /* Configuration register EPE */
+#define UDCCRF 0x40600418 /* Configuration register EPF */
+#define UDCCRG 0x4060041C /* Configuration register EPG */
+#define UDCCRH 0x40600420 /* Configuration register EPH */
+#define UDCCRI 0x40600424 /* Configuration register EPI */
+#define UDCCRJ 0x40600428 /* Configuration register EPJ */
+#define UDCCRK 0x4060042C /* Configuration register EPK */
+#define UDCCRL 0x40600430 /* Configuration register EPL */
+#define UDCCRM 0x40600434 /* Configuration register EPM */
+#define UDCCRN 0x40600438 /* Configuration register EPN */
+#define UDCCRP 0x4060043C /* Configuration register EPP */
+#define UDCCRQ 0x40600440 /* Configuration register EPQ */
+#define UDCCRR 0x40600444 /* Configuration register EPR */
+#define UDCCRS 0x40600448 /* Configuration register EPS */
+#define UDCCRT 0x4060044C /* Configuration register EPT */
+#define UDCCRU 0x40600450 /* Configuration register EPU */
+#define UDCCRV 0x40600454 /* Configuration register EPV */
+#define UDCCRW 0x40600458 /* Configuration register EPW */
+#define UDCCRX 0x4060045C /* Configuration register EPX */
#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
#define UDCCONR_CN_S (25)
@@ -959,38 +968,39 @@ typedef void (*ExcpHndlr) (void) ;
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+/******************************************************************************/
/*
* USB Host Controller
*/
#define OHCI_REGS_BASE 0x4C000000 /* required for ohci driver */
-#define UHCREV __REG(0x4C000000)
-#define UHCHCON __REG(0x4C000004)
-#define UHCCOMS __REG(0x4C000008)
-#define UHCINTS __REG(0x4C00000C)
-#define UHCINTE __REG(0x4C000010)
-#define UHCINTD __REG(0x4C000014)
-#define UHCHCCA __REG(0x4C000018)
-#define UHCPCED __REG(0x4C00001C)
-#define UHCCHED __REG(0x4C000020)
-#define UHCCCED __REG(0x4C000024)
-#define UHCBHED __REG(0x4C000028)
-#define UHCBCED __REG(0x4C00002C)
-#define UHCDHEAD __REG(0x4C000030)
-#define UHCFMI __REG(0x4C000034)
-#define UHCFMR __REG(0x4C000038)
-#define UHCFMN __REG(0x4C00003C)
-#define UHCPERS __REG(0x4C000040)
-#define UHCLST __REG(0x4C000044)
-#define UHCRHDA __REG(0x4C000048)
-#define UHCRHDB __REG(0x4C00004C)
-#define UHCRHS __REG(0x4C000050)
-#define UHCRHPS1 __REG(0x4C000054)
-#define UHCRHPS2 __REG(0x4C000058)
-#define UHCRHPS3 __REG(0x4C00005C)
-#define UHCSTAT __REG(0x4C000060)
-#define UHCHR __REG(0x4C000064)
-#define UHCHIE __REG(0x4C000068)
-#define UHCHIT __REG(0x4C00006C)
+#define UHCREV 0x4C000000
+#define UHCHCON 0x4C000004
+#define UHCCOMS 0x4C000008
+#define UHCINTS 0x4C00000C
+#define UHCINTE 0x4C000010
+#define UHCINTD 0x4C000014
+#define UHCHCCA 0x4C000018
+#define UHCPCED 0x4C00001C
+#define UHCCHED 0x4C000020
+#define UHCCCED 0x4C000024
+#define UHCBHED 0x4C000028
+#define UHCBCED 0x4C00002C
+#define UHCDHEAD 0x4C000030
+#define UHCFMI 0x4C000034
+#define UHCFMR 0x4C000038
+#define UHCFMN 0x4C00003C
+#define UHCPERS 0x4C000040
+#define UHCLST 0x4C000044
+#define UHCRHDA 0x4C000048
+#define UHCRHDB 0x4C00004C
+#define UHCRHS 0x4C000050
+#define UHCRHPS1 0x4C000054
+#define UHCRHPS2 0x4C000058
+#define UHCRHPS3 0x4C00005C
+#define UHCSTAT 0x4C000060
+#define UHCHR 0x4C000064
+#define UHCHIE 0x4C000068
+#define UHCHIT 0x4C00006C
#define UHCHR_FSBIR (1<<0)
#define UHCHR_FHR (1<<1)
@@ -1011,9 +1021,7 @@ typedef void (*ExcpHndlr) (void) ;
#define UHCHIE_HBAIE (1<<8)
#define UHCHIE_RWIE (1<<7)
-#if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
-#define UP2OCR __REG(0x40600020)
-#endif
+#define UP2OCR 0x40600020
#define UP2OCR_HXOE (1<<17)
#define UP2OCR_HXS (1<<16)
@@ -1029,36 +1037,37 @@ typedef void (*ExcpHndlr) (void) ;
#define UP2OCR_CPVPE (1<<1)
#define UP2OCR_CPVEN (1<<0)
-#endif
+#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+/******************************************************************************/
/*
* Fast Infrared Communication Port
*/
-#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
-#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
-#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
-#define ICDR __REG(0x4080000c) /* ICP Data Register */
-#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
-#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
+#define ICCR0 0x40800000 /* ICP Control Register 0 */
+#define ICCR1 0x40800004 /* ICP Control Register 1 */
+#define ICCR2 0x40800008 /* ICP Control Register 2 */
+#define ICDR 0x4080000c /* ICP Data Register */
+#define ICSR0 0x40800014 /* ICP Status Register 0 */
+#define ICSR1 0x40800018 /* ICP Status Register 1 */
/*
* Real Time Clock
*/
-#define RCNR __REG(0x40900000) /* RTC Count Register */
-#define RTAR __REG(0x40900004) /* RTC Alarm Register */
-#define RTSR __REG(0x40900008) /* RTC Status Register */
-#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
-#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */
-#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */
-#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */
-#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */
-#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */
-#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */
-#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
-#define RDCR __REG(0x40900010) /* RTC Day Count Register. */
-#define RYCR __REG(0x40900014) /* RTC Year Count Register. */
-#define SWCR __REG(0x40900028) /* Stopwatch Count Register */
-#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */
+#define RCNR 0x40900000 /* RTC Count Register */
+#define RTAR 0x40900004 /* RTC Alarm Register */
+#define RTSR 0x40900008 /* RTC Status Register */
+#define RTTR 0x4090000C /* RTC Timer Trim Register */
+#define RDAR1 0x40900018 /* Wristwatch Day Alarm Reg 1 */
+#define RDAR2 0x40900020 /* Wristwatch Day Alarm Reg 2 */
+#define RYAR1 0x4090001C /* Wristwatch Year Alarm Reg 1 */
+#define RYAR2 0x40900024 /* Wristwatch Year Alarm Reg 2 */
+#define SWAR1 0x4090002C /* Stopwatch Alarm Register 1 */
+#define SWAR2 0x40900030 /* Stopwatch Alarm Register 2 */
+#define PIAR 0x40900038 /* Periodic Interrupt Alarm Register */
+#define RDCR 0x40900010 /* RTC Day Count Register. */
+#define RYCR 0x40900014 /* RTC Year Count Register. */
+#define SWCR 0x40900028 /* Stopwatch Count Register */
+#define RTCPICR 0x40900034 /* Periodic Interrupt Counter Register */
#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */
#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */
@@ -1068,48 +1077,48 @@ typedef void (*ExcpHndlr) (void) ;
#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
#define RTSR_AL (1 << 0) /* RTC alarm detected */
+/******************************************************************************/
/*
* OS Timer & Match Registers
*/
-#define OSMR0 __REG(0x40A00000) /* OS Timer Match Register 0 */
-#define OSMR1 __REG(0x40A00004) /* OS Timer Match Register 1 */
-#define OSMR2 __REG(0x40A00008) /* OS Timer Match Register 2 */
-#define OSMR3 __REG(0x40A0000C) /* OS Timer Match Register 3 */
-#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
-#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
-#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
-#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
+#define OSMR0 0x40A00000 /* OS Timer Match Register 0 */
+#define OSMR1 0x40A00004 /* OS Timer Match Register 1 */
+#define OSMR2 0x40A00008 /* OS Timer Match Register 2 */
+#define OSMR3 0x40A0000C /* OS Timer Match Register 3 */
+#define OSCR 0x40A00010 /* OS Timer Counter Register */
+#define OSSR 0x40A00014 /* OS Timer Status Register */
+#define OWER 0x40A00018 /* OS Timer Watchdog Enable Register */
+#define OIER 0x40A0001C /* OS Timer Interrupt Enable Register */
-#ifdef CONFIG_CPU_MONAHANS
-#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register 4 */
-#define OSCR5 __REG(0x40A00044) /* OS Timer Counter Register 5 */
-#define OSCR6 __REG(0x40A00048) /* OS Timer Counter Register 6 */
-#define OSCR7 __REG(0x40A0004C) /* OS Timer Counter Register 7 */
-#define OSCR8 __REG(0x40A00050) /* OS Timer Counter Register 8 */
-#define OSCR9 __REG(0x40A00054) /* OS Timer Counter Register 9 */
-#define OSCR10 __REG(0x40A00058) /* OS Timer Counter Register 10 */
-#define OSCR11 __REG(0x40A0005C) /* OS Timer Counter Register 11 */
-
-#define OSMR4 __REG(0x40A00080) /* OS Timer Match Register 4 */
-#define OSMR5 __REG(0x40A00084) /* OS Timer Match Register 5 */
-#define OSMR6 __REG(0x40A00088) /* OS Timer Match Register 6 */
-#define OSMR7 __REG(0x40A0008C) /* OS Timer Match Register 7 */
-#define OSMR8 __REG(0x40A00090) /* OS Timer Match Register 8 */
-#define OSMR9 __REG(0x40A00094) /* OS Timer Match Register 9 */
-#define OSMR10 __REG(0x40A00098) /* OS Timer Match Register 10 */
-#define OSMR11 __REG(0x40A0009C) /* OS Timer Match Register 11 */
-
-#define OMCR4 __REG(0x40A000C0) /* OS Match Control Register 4 */
-#define OMCR5 __REG(0x40A000C4) /* OS Match Control Register 5 */
-#define OMCR6 __REG(0x40A000C8) /* OS Match Control Register 6 */
-#define OMCR7 __REG(0x40A000CC) /* OS Match Control Register 7 */
-#define OMCR8 __REG(0x40A000D0) /* OS Match Control Register 8 */
-#define OMCR9 __REG(0x40A000D4) /* OS Match Control Register 9 */
-#define OMCR10 __REG(0x40A000D8) /* OS Match Control Register 10 */
-#define OMCR11 __REG(0x40A000DC) /* OS Match Control Register 11 */
-
-#define OSCR_CLK_FREQ 3250 /* kHz = 3.25 MHz */
-#endif /* CONFIG_CPU_MONAHANS */
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define OSCR4 0x40A00040 /* OS Timer Counter Register 4 */
+#define OSCR5 0x40A00044 /* OS Timer Counter Register 5 */
+#define OSCR6 0x40A00048 /* OS Timer Counter Register 6 */
+#define OSCR7 0x40A0004C /* OS Timer Counter Register 7 */
+#define OSCR8 0x40A00050 /* OS Timer Counter Register 8 */
+#define OSCR9 0x40A00054 /* OS Timer Counter Register 9 */
+#define OSCR10 0x40A00058 /* OS Timer Counter Register 10 */
+#define OSCR11 0x40A0005C /* OS Timer Counter Register 11 */
+
+#define OSMR4 0x40A00080 /* OS Timer Match Register 4 */
+#define OSMR5 0x40A00084 /* OS Timer Match Register 5 */
+#define OSMR6 0x40A00088 /* OS Timer Match Register 6 */
+#define OSMR7 0x40A0008C /* OS Timer Match Register 7 */
+#define OSMR8 0x40A00090 /* OS Timer Match Register 8 */
+#define OSMR9 0x40A00094 /* OS Timer Match Register 9 */
+#define OSMR10 0x40A00098 /* OS Timer Match Register 10 */
+#define OSMR11 0x40A0009C /* OS Timer Match Register 11 */
+
+#define OMCR4 0x40A000C0 /* OS Match Control Register 4 */
+#define OMCR5 0x40A000C4 /* OS Match Control Register 5 */
+#define OMCR6 0x40A000C8 /* OS Match Control Register 6 */
+#define OMCR7 0x40A000CC /* OS Match Control Register 7 */
+#define OMCR8 0x40A000D0 /* OS Match Control Register 8 */
+#define OMCR9 0x40A000D4 /* OS Match Control Register 9 */
+#define OMCR10 0x40A000D8 /* OS Match Control Register 10 */
+#define OMCR11 0x40A000DC /* OS Match Control Register 11 */
+
+#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
#define OSSR_M4 (1 << 4) /* Match status channel 4 */
#define OSSR_M3 (1 << 3) /* Match status channel 3 */
@@ -1125,321 +1134,696 @@ typedef void (*ExcpHndlr) (void) ;
#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
+#define OSCR_CLK_FREQ 3250
+
+/******************************************************************************/
/*
- * Pulse Width Modulator
+ * Core Clock
*/
-#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */
-#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */
-#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */
-#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1 Control Register */
-#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */
-#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */
+#if defined(CONFIG_CPU_MONAHANS)
+#define ACCR 0x41340000 /* Application Subsystem Clock Configuration Register */
+#define ACSR 0x41340004 /* Application Subsystem Clock Status Register */
+#define AICSR 0x41340008 /* Application Subsystem Interrupt Control/Status Register */
+#define CKENA 0x4134000C /* A Clock Enable Register */
+#define CKENB 0x41340010 /* B Clock Enable Register */
+#define AC97_DIV 0x41340014 /* AC97 clock divisor value register */
+
+#define ACCR_SMC_MASK 0x03800000 /* Static Memory Controller Frequency Select */
+#define ACCR_SRAM_MASK 0x000c0000 /* SRAM Controller Frequency Select */
+#define ACCR_FC_MASK 0x00030000 /* Frequency Change Frequency Select */
+#define ACCR_HSIO_MASK 0x0000c000 /* High Speed IO Frequency Select */
+#define ACCR_DDR_MASK 0x00003000 /* DDR Memory Controller Frequency Select */
+#define ACCR_XN_MASK 0x00000700 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define ACCR_XL_MASK 0x0000001f /* Crystal Frequency to Memory Frequency Multiplier */
+#define ACCR_XPDIS (1 << 31)
+#define ACCR_SPDIS (1 << 30)
+#define ACCR_13MEND1 (1 << 27)
+#define ACCR_D0CS (1 << 26)
+#define ACCR_13MEND2 (1 << 21)
+#define ACCR_PCCE (1 << 11)
+
+#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */
+#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */
+#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */
+#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */
+#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */
+#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */
+#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */
+#define CKENA_23_STUART (1 << 23) /* STUART Unit Clock Enable */
+#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */
+#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */
+#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */
+#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */
+#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */
+#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */
+#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */
+#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */
+#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */
+#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */
+#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */
+#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */
+#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */
+#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */
+#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */
+#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */
+#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */
+#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */
+#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */
+#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */
+
+#define CKENB_9_SYSBUS2 (1 << 9) /* System bus 2 */
+#define CKENB_8_1WIRE (1 << 8) /* One Wire Interface Unit Clock Enable */
+#define CKENB_7_GPIO (1 << 7) /* GPIO Clock Enable */
+#define CKENB_6_IRQ (1 << 6) /* Interrupt Controller Clock Enable */
+#define CKENB_4_I2C (1 << 4) /* I2C Unit Clock Enable */
+#define CKENB_1_PWM1 (1 << 1) /* PWM2 & PWM3 Clock Enable */
+#define CKENB_0_PWM0 (1 << 0) /* PWM0 & PWM1 Clock Enable */
+
+#else /* if defined CONFIG_CPU_MONAHANS */
+
+#define CCCR 0x41300000 /* Core Clock Configuration Register */
+#define CKEN 0x41300004 /* Clock Enable Register */
+#define OSCC 0x41300008 /* Oscillator Configuration Register */
+#define CCSR 0x4130000C /* Core Clock Status Register */
+
+#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */
+#define CKEN22_MEMC (1 << 22) /* Memory Controler */
+#define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */
+#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */
+#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */
+#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */
+#define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */
+#define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */
+#define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */
+#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */
+
+#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#if !defined(CONFIG_PXA27X)
+#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
+#endif
+#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */
+#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */
+#define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */
+#define CKEN21_MEMSTK (1 << 21) /* Memory Stick Host Controller */
+#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */
+#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */
+#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */
+#define CKEN17_MSL (1 << 17) /* MSL Unit Clock Enable */
+#define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */
+#define CKEN15_PWRI2C (1 << 15) /* PWR I2C Unit Clock Enable */
+#define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */
+#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */
+#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */
+#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */
+#if defined(CONFIG_PXA27X)
+#define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */
+#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */
+#endif
+#define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */
+#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */
+#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */
+#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */
+#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */
+#define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */
+#define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */
+#define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */
+
+#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
+
+#if !defined(CONFIG_PXA27X)
+#define CCCR_L09 (0x1F)
+#define CCCR_L27 (0x1)
+#define CCCR_L32 (0x2)
+#define CCCR_L36 (0x3)
+#define CCCR_L40 (0x4)
+#define CCCR_L45 (0x5)
+
+#define CCCR_M1 (0x1 << 5)
+#define CCCR_M2 (0x2 << 5)
+#define CCCR_M4 (0x3 << 5)
-#define PWM_CTRL2 __REG(0x40B00010) /* PWM 2 Control Register */
-#define PWM_PWDUTY2 __REG(0x40B00014) /* PWM 2 Duty Cycle Register */
-#define PWM_PERVAL2 __REG(0x40B00018) /* PWM 2 Period Control Register */
+#define CCCR_N10 (0x2 << 7)
+#define CCCR_N15 (0x3 << 7)
+#define CCCR_N20 (0x4 << 7)
+#define CCCR_N25 (0x5 << 7)
+#define CCCR_N30 (0x6 << 7)
+#endif
-#define PWM_CTRL3 __REG(0x40C00010) /* PWM 3 Control Register */
-#define PWM_PWDUTY3 __REG(0x40C00014) /* PWM 3 Duty Cycle Register */
-#define PWM_PERVAL3 __REG(0x40C00018) /* PWM 3 Period Control Register */
+#endif /* CONFIG_CPU_MONAHANS */
+/******************************************************************************/
/*
- * Interrupt Controller
+ * Pulse Width Modulator
*/
-#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
-#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
-#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
-#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
-#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
-#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
+#define PWM_CTRL0 0x40B00000 /* PWM 0 Control Register */
+#define PWM_PWDUTY0 0x40B00004 /* PWM 0 Duty Cycle Register */
+#define PWM_PERVAL0 0x40B00008 /* PWM 0 Period Control Register */
-#ifdef CONFIG_CPU_MONAHANS
-#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */
-/* Missing: 32 Interrupt priority registers
- * These are the same as beneath for PXA27x: maybe can be merged if
- * GPIO Stuff is same too.
+#define PWM_CTRL1 0x40C00000 /* PWM 1 Control Register */
+#define PWM_PWDUTY1 0x40C00004 /* PWM 1 Duty Cycle Register */
+#define PWM_PERVAL1 0x40C00008 /* PWM 1 Period Control Register */
+
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define PWM_CTRL2 0x40B00010 /* PWM 2 Control Register */
+#define PWM_PWDUTY2 0x40B00014 /* PWM 2 Duty Cycle Register */
+#define PWM_PERVAL2 0x40B00018 /* PWM 2 Period Control Register */
+
+#define PWM_CTRL3 0x40C00010 /* PWM 3 Control Register */
+#define PWM_PWDUTY3 0x40C00014 /* PWM 3 Duty Cycle Register */
+#define PWM_PERVAL3 0x40C00018 /* PWM 3 Period Control Register */
+#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+
+/*
+ * Interrupt Controller
*/
-#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
-#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
-#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
-/* Missing: 2 Interrupt priority registers */
-#endif /* CONFIG_CPU_MONAHANS */
+#define ICIP 0x40D00000 /* Interrupt Controller IRQ Pending Register */
+#define ICMR 0x40D00004 /* Interrupt Controller Mask Register */
+#define ICLR 0x40D00008 /* Interrupt Controller Level Register */
+#define ICFP 0x40D0000C /* Interrupt Controller FIQ Pending Register */
+#define ICPR 0x40D00010 /* Interrupt Controller Pending Register */
+#define ICCR 0x40D00014 /* Interrupt Controller Control Register */
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define ICHP 0x40D00018 /* Interrupt Controller Highest Priority Register */
+#define ICIP2 0x40D0009C /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2 0x40D000A0 /* Interrupt Controller Mask Register 2 */
+#define ICLR2 0x40D000A4 /* Interrupt Controller Level Register 2 */
+#define ICFP2 0x40D000A8 /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2 0x40D000AC /* Interrupt Controller Pending Register 2 */
+#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+
+/******************************************************************************/
/*
* General Purpose I/O
*/
-#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
-#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
-#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
+#define GPLR0 0x40E00000 /* GPIO Pin-Level Register GPIO<31:0> */
+#define GPLR1 0x40E00004 /* GPIO Pin-Level Register GPIO<63:32> */
+#define GPLR2 0x40E00008 /* GPIO Pin-Level Register GPIO<80:64> */
-#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */
-#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */
-#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */
+#define GPDR0 0x40E0000C /* GPIO Pin Direction Register GPIO<31:0> */
+#define GPDR1 0x40E00010 /* GPIO Pin Direction Register GPIO<63:32> */
+#define GPDR2 0x40E00014 /* GPIO Pin Direction Register GPIO<80:64> */
-#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */
-#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */
-#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */
+#define GPSR0 0x40E00018 /* GPIO Pin Output Set Register GPIO<31:0> */
+#define GPSR1 0x40E0001C /* GPIO Pin Output Set Register GPIO<63:32> */
+#define GPSR2 0x40E00020 /* GPIO Pin Output Set Register GPIO<80:64> */
-#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */
-#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */
-#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */
+#define GPCR0 0x40E00024 /* GPIO Pin Output Clear Register GPIO<31:0> */
+#define GPCR1 0x40E00028 /* GPIO Pin Output Clear Register GPIO <63:32> */
+#define GPCR2 0x40E0002C /* GPIO Pin Output Clear Register GPIO <80:64> */
-#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */
-#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */
-#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */
+#define GRER0 0x40E00030 /* GPIO Rising-Edge Detect Register GPIO<31:0> */
+#define GRER1 0x40E00034 /* GPIO Rising-Edge Detect Register GPIO<63:32> */
+#define GRER2 0x40E00038 /* GPIO Rising-Edge Detect Register GPIO<80:64> */
-#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */
-#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */
+#define GFER0 0x40E0003C /* GPIO Falling-Edge Detect Register GPIO<31:0> */
+#define GFER1 0x40E00040 /* GPIO Falling-Edge Detect Register GPIO<63:32> */
+#define GFER2 0x40E00044 /* GPIO Falling-Edge Detect Register GPIO<80:64> */
-#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */
-#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */
-#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */
+#define GEDR0 0x40E00048 /* GPIO Edge Detect Status Register GPIO<31:0> */
+#define GEDR1 0x40E0004C /* GPIO Edge Detect Status Register GPIO<63:32> */
+#define GEDR2 0x40E00050 /* GPIO Edge Detect Status Register GPIO<80:64> */
+
+#define GAFR0_L 0x40E00054 /* GPIO Alternate Function Select Register GPIO<15:0> */
+#define GAFR0_U 0x40E00058 /* GPIO Alternate Function Select Register GPIO<31:16> */
+#define GAFR1_L 0x40E0005C /* GPIO Alternate Function Select Register GPIO<47:32> */
+#define GAFR1_U 0x40E00060 /* GPIO Alternate Function Select Register GPIO<63:48> */
+#define GAFR2_L 0x40E00064 /* GPIO Alternate Function Select Register GPIO<79:64> */
+#define GAFR2_U 0x40E00068 /* GPIO Alternate Function Select Register GPIO 80 */
+
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define GPLR3 0x40E00100 /* GPIO Pin-Level Register GPIO<127:96> */
+#define GPDR3 0x40E0010C /* GPIO Pin Direction Register GPIO<127:96> */
+#define GPSR3 0x40E00118 /* GPIO Pin Output Set Register GPIO<127:96> */
+#define GPCR3 0x40E00124 /* GPIO Pin Output Clear Register GPIO<127:96> */
+#define GRER3 0x40E00130 /* GPIO Rising-Edge Detect Register GPIO<127:96> */
+#define GFER3 0x40E0013C /* GPIO Falling-Edge Detect Register GPIO<127:96> */
+#define GEDR3 0x40E00148 /* GPIO Edge Detect Status Register GPIO<127:96> */
+#define GAFR3_L 0x40E0006C /* GPIO Alternate Function Select Register GPIO<111:96> */
+#define GAFR3_U 0x40E00070 /* GPIO Alternate Function Select Register GPIO<127:112> */
+#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
#ifdef CONFIG_CPU_MONAHANS
-#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */
-#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */
-#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-#define GSDR0 __REG(0x40E00400) /* Bit-wise Set of GPDR[31:0] */
-#define GSDR1 __REG(0x40E00404) /* Bit-wise Set of GPDR[63:32] */
-#define GSDR2 __REG(0x40E00408) /* Bit-wise Set of GPDR[95:64] */
-#define GSDR3 __REG(0x40E0040C) /* Bit-wise Set of GPDR[127:96] */
-
-#define GCDR0 __REG(0x40E00420) /* Bit-wise Clear of GPDR[31:0] */
-#define GCDR1 __REG(0x40E00424) /* Bit-wise Clear of GPDR[63:32] */
-#define GCDR2 __REG(0x40E00428) /* Bit-wise Clear of GPDR[95:64] */
-#define GCDR3 __REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */
-
-#define GSRER0 __REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */
-#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */
-#define GSRER2 __REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */
-#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */
-
-#define GCRER0 __REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */
-#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */
-#define GCRER2 __REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */
-#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */
-
-#define GSFER0 __REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */
-#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */
-#define GSFER2 __REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */
-#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */
-
-#define GCFER0 __REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */
-#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */
-#define GCFER2 __REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */
-#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */
-
-#define GSDR(x) __REG2(0x40E00400, ((x) & 0x60) >> 3)
-#define GCDR(x) __REG2(0x40E00420, ((x) & 0x60) >> 3)
-
-/* Multi-funktion Pin Registers, uncomplete, only:
- * - GPIO
- * - Data Flash DF_* pins defined.
+#define GSDR0 0x40E00400 /* Bit-wise Set of GPDR[31:0] */
+#define GSDR1 0x40E00404 /* Bit-wise Set of GPDR[63:32] */
+#define GSDR2 0x40E00408 /* Bit-wise Set of GPDR[95:64] */
+#define GSDR3 0x40E0040C /* Bit-wise Set of GPDR[127:96] */
+
+#define GCDR0 0x40E00420 /* Bit-wise Clear of GPDR[31:0] */
+#define GCDR1 0x40E00424 /* Bit-wise Clear of GPDR[63:32] */
+#define GCDR2 0x40E00428 /* Bit-wise Clear of GPDR[95:64] */
+#define GCDR3 0x40E0042C /* Bit-wise Clear of GPDR[127:96] */
+
+#define GSRER0 0x40E00440 /* Set Rising Edge Det. Enable [31:0] */
+#define GSRER1 0x40E00444 /* Set Rising Edge Det. Enable [63:32] */
+#define GSRER2 0x40E00448 /* Set Rising Edge Det. Enable [95:64] */
+#define GSRER3 0x40E0044C /* Set Rising Edge Det. Enable [127:96] */
+
+#define GCRER0 0x40E00460 /* Clear Rising Edge Det. Enable [31:0] */
+#define GCRER1 0x40E00464 /* Clear Rising Edge Det. Enable [63:32] */
+#define GCRER2 0x40E00468 /* Clear Rising Edge Det. Enable [95:64] */
+#define GCRER3 0x40E0046C /* Clear Rising Edge Det. Enable[127:96] */
+
+#define GSFER0 0x40E00480 /* Set Falling Edge Det. Enable [31:0] */
+#define GSFER1 0x40E00484 /* Set Falling Edge Det. Enable [63:32] */
+#define GSFER2 0x40E00488 /* Set Falling Edge Det. Enable [95:64] */
+#define GSFER3 0x40E0048C /* Set Falling Edge Det. Enable[127:96] */
+
+#define GCFER0 0x40E004A0 /* Clr Falling Edge Det. Enable [31:0] */
+#define GCFER1 0x40E004A4 /* Clr Falling Edge Det. Enable [63:32] */
+#define GCFER2 0x40E004A8 /* Clr Falling Edge Det. Enable [95:64] */
+#define GCFER3 0x40E004AC /* Clr Falling Edge Det. Enable[127:96] */
+
+#define GSDR(x) (0x40E00400 | ((x) & 0x60) >> 3)
+#define GCDR(x) (0x40E00420 | ((x) & 0x60) >> 3)
+#endif
+
+#define _GPLR(x) (0x40E00000 + (((x) & 0x60) >> 3))
+#define _GPDR(x) (0x40E0000C + (((x) & 0x60) >> 3))
+#define _GPSR(x) (0x40E00018 + (((x) & 0x60) >> 3))
+#define _GPCR(x) (0x40E00024 + (((x) & 0x60) >> 3))
+#define _GRER(x) (0x40E00030 + (((x) & 0x60) >> 3))
+#define _GFER(x) (0x40E0003C + (((x) & 0x60) >> 3))
+#define _GEDR(x) (0x40E00048 + (((x) & 0x60) >> 3))
+#define _GAFR(x) (0x40E00054 + (((x) & 0x70) >> 2))
+
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define GPLR(x) (((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3))
+#define GPDR(x) (((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3))
+#define GPSR(x) (((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3))
+#define GPCR(x) (((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3))
+#define GRER(x) (((((x) & 0x7f) < 96) ? _GRER(x) : GRER3))
+#define GFER(x) (((((x) & 0x7f) < 96) ? _GFER(x) : GFER3))
+#define GEDR(x) (((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3))
+#define GAFR(x) (((((x) & 0x7f) < 96) ? _GAFR(x) : \
+ ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)))
+#else
+#define GPLR(x) _GPLR(x)
+#define GPDR(x) _GPDR(x)
+#define GPSR(x) _GPSR(x)
+#define GPCR(x) _GPCR(x)
+#define GRER(x) _GRER(x)
+#define GFER(x) _GFER(x)
+#define GEDR(x) _GEDR(x)
+#define GAFR(x) _GAFR(x)
+#endif
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+
+/******************************************************************************/
+/*
+ * Multi-function Pin Registers:
*/
-#define GPIO0 __REG(0x40e10124)
-#define GPIO1 __REG(0x40e10128)
-#define GPIO2 __REG(0x40e1012c)
-#define GPIO3 __REG(0x40e10130)
-#define GPIO4 __REG(0x40e10134)
-#define nXCVREN __REG(0x40e10138)
-
-#define DF_CLE_NOE __REG(0x40e10204)
-#define DF_ALE_WE1 __REG(0x40e10208)
-
-#define DF_SCLK_E __REG(0x40e10210)
-#define nBE0 __REG(0x40e10214)
-#define nBE1 __REG(0x40e10218)
-#define DF_ALE_WE2 __REG(0x40e1021c)
-#define DF_INT_RnB __REG(0x40e10220)
-#define DF_nCS0 __REG(0x40e10224)
-#define DF_nCS1 __REG(0x40e10228)
-#define DF_nWE __REG(0x40e1022c)
-#define DF_nRE __REG(0x40e10230)
-#define nLUA __REG(0x40e10234)
-#define nLLA __REG(0x40e10238)
-#define DF_ADDR0 __REG(0x40e1023c)
-#define DF_ADDR1 __REG(0x40e10240)
-#define DF_ADDR2 __REG(0x40e10244)
-#define DF_ADDR3 __REG(0x40e10248)
-#define DF_IO0 __REG(0x40e1024c)
-#define DF_IO8 __REG(0x40e10250)
-#define DF_IO1 __REG(0x40e10254)
-#define DF_IO9 __REG(0x40e10258)
-#define DF_IO2 __REG(0x40e1025c)
-#define DF_IO10 __REG(0x40e10260)
-#define DF_IO3 __REG(0x40e10264)
-#define DF_IO11 __REG(0x40e10268)
-#define DF_IO4 __REG(0x40e1026c)
-#define DF_IO12 __REG(0x40e10270)
-#define DF_IO5 __REG(0x40e10274)
-#define DF_IO13 __REG(0x40e10278)
-#define DF_IO6 __REG(0x40e1027c)
-#define DF_IO14 __REG(0x40e10280)
-#define DF_IO7 __REG(0x40e10284)
-#define DF_IO15 __REG(0x40e10288)
-
-#define GPIO5 __REG(0x40e1028c)
-#define GPIO6 __REG(0x40e10290)
-#define GPIO7 __REG(0x40e10294)
-#define GPIO8 __REG(0x40e10298)
-#define GPIO9 __REG(0x40e1029c)
-
-#define GPIO11 __REG(0x40e102a0)
-#define GPIO12 __REG(0x40e102a4)
-#define GPIO13 __REG(0x40e102a8)
-#define GPIO14 __REG(0x40e102ac)
-#define GPIO15 __REG(0x40e102b0)
-#define GPIO16 __REG(0x40e102b4)
-#define GPIO17 __REG(0x40e102b8)
-#define GPIO18 __REG(0x40e102bc)
-#define GPIO19 __REG(0x40e102c0)
-#define GPIO20 __REG(0x40e102c4)
-#define GPIO21 __REG(0x40e102c8)
-#define GPIO22 __REG(0x40e102cc)
-#define GPIO23 __REG(0x40e102d0)
-#define GPIO24 __REG(0x40e102d4)
-#define GPIO25 __REG(0x40e102d8)
-#define GPIO26 __REG(0x40e102dc)
-
-#define GPIO27 __REG(0x40e10400)
-#define GPIO28 __REG(0x40e10404)
-#define GPIO29 __REG(0x40e10408)
-#define GPIO30 __REG(0x40e1040c)
-#define GPIO31 __REG(0x40e10410)
-#define GPIO32 __REG(0x40e10414)
-#define GPIO33 __REG(0x40e10418)
-#define GPIO34 __REG(0x40e1041c)
-#define GPIO35 __REG(0x40e10420)
-#define GPIO36 __REG(0x40e10424)
-#define GPIO37 __REG(0x40e10428)
-#define GPIO38 __REG(0x40e1042c)
-#define GPIO39 __REG(0x40e10430)
-#define GPIO40 __REG(0x40e10434)
-#define GPIO41 __REG(0x40e10438)
-#define GPIO42 __REG(0x40e1043c)
-#define GPIO43 __REG(0x40e10440)
-#define GPIO44 __REG(0x40e10444)
-#define GPIO45 __REG(0x40e10448)
-#define GPIO46 __REG(0x40e1044c)
-#define GPIO47 __REG(0x40e10450)
-#define GPIO48 __REG(0x40e10454)
-
-#define GPIO10 __REG(0x40e10458)
-
-#define GPIO49 __REG(0x40e1045c)
-#define GPIO50 __REG(0x40e10460)
-#define GPIO51 __REG(0x40e10464)
-#define GPIO52 __REG(0x40e10468)
-#define GPIO53 __REG(0x40e1046c)
-#define GPIO54 __REG(0x40e10470)
-#define GPIO55 __REG(0x40e10474)
-#define GPIO56 __REG(0x40e10478)
-#define GPIO57 __REG(0x40e1047c)
-#define GPIO58 __REG(0x40e10480)
-#define GPIO59 __REG(0x40e10484)
-#define GPIO60 __REG(0x40e10488)
-#define GPIO61 __REG(0x40e1048c)
-#define GPIO62 __REG(0x40e10490)
-
-#define GPIO6_2 __REG(0x40e10494)
-#define GPIO7_2 __REG(0x40e10498)
-#define GPIO8_2 __REG(0x40e1049c)
-#define GPIO9_2 __REG(0x40e104a0)
-#define GPIO10_2 __REG(0x40e104a4)
-#define GPIO11_2 __REG(0x40e104a8)
-#define GPIO12_2 __REG(0x40e104ac)
-#define GPIO13_2 __REG(0x40e104b0)
-
-#define GPIO63 __REG(0x40e104b4)
-#define GPIO64 __REG(0x40e104b8)
-#define GPIO65 __REG(0x40e104bc)
-#define GPIO66 __REG(0x40e104c0)
-#define GPIO67 __REG(0x40e104c4)
-#define GPIO68 __REG(0x40e104c8)
-#define GPIO69 __REG(0x40e104cc)
-#define GPIO70 __REG(0x40e104d0)
-#define GPIO71 __REG(0x40e104d4)
-#define GPIO72 __REG(0x40e104d8)
-#define GPIO73 __REG(0x40e104dc)
-
-#define GPIO14_2 __REG(0x40e104e0)
-#define GPIO15_2 __REG(0x40e104e4)
-#define GPIO16_2 __REG(0x40e104e8)
-#define GPIO17_2 __REG(0x40e104ec)
-
-#define GPIO74 __REG(0x40e104f0)
-#define GPIO75 __REG(0x40e104f4)
-#define GPIO76 __REG(0x40e104f8)
-#define GPIO77 __REG(0x40e104fc)
-#define GPIO78 __REG(0x40e10500)
-#define GPIO79 __REG(0x40e10504)
-#define GPIO80 __REG(0x40e10508)
-#define GPIO81 __REG(0x40e1050c)
-#define GPIO82 __REG(0x40e10510)
-#define GPIO83 __REG(0x40e10514)
-#define GPIO84 __REG(0x40e10518)
-#define GPIO85 __REG(0x40e1051c)
-#define GPIO86 __REG(0x40e10520)
-#define GPIO87 __REG(0x40e10524)
-#define GPIO88 __REG(0x40e10528)
-#define GPIO89 __REG(0x40e1052c)
-#define GPIO90 __REG(0x40e10530)
-#define GPIO91 __REG(0x40e10534)
-#define GPIO92 __REG(0x40e10538)
-#define GPIO93 __REG(0x40e1053c)
-#define GPIO94 __REG(0x40e10540)
-#define GPIO95 __REG(0x40e10544)
-#define GPIO96 __REG(0x40e10548)
-#define GPIO97 __REG(0x40e1054c)
-#define GPIO98 __REG(0x40e10550)
-
-#define GPIO99 __REG(0x40e10600)
-#define GPIO100 __REG(0x40e10604)
-#define GPIO101 __REG(0x40e10608)
-#define GPIO102 __REG(0x40e1060c)
-#define GPIO103 __REG(0x40e10610)
-#define GPIO104 __REG(0x40e10614)
-#define GPIO105 __REG(0x40e10618)
-#define GPIO106 __REG(0x40e1061c)
-#define GPIO107 __REG(0x40e10620)
-#define GPIO108 __REG(0x40e10624)
-#define GPIO109 __REG(0x40e10628)
-#define GPIO110 __REG(0x40e1062c)
-#define GPIO111 __REG(0x40e10630)
-#define GPIO112 __REG(0x40e10634)
-
-#define GPIO113 __REG(0x40e10638)
-#define GPIO114 __REG(0x40e1063c)
-#define GPIO115 __REG(0x40e10640)
-#define GPIO116 __REG(0x40e10644)
-#define GPIO117 __REG(0x40e10648)
-#define GPIO118 __REG(0x40e1064c)
-#define GPIO119 __REG(0x40e10650)
-#define GPIO120 __REG(0x40e10654)
-#define GPIO121 __REG(0x40e10658)
-#define GPIO122 __REG(0x40e1065c)
-#define GPIO123 __REG(0x40e10660)
-#define GPIO124 __REG(0x40e10664)
-#define GPIO125 __REG(0x40e10668)
-#define GPIO126 __REG(0x40e1066c)
-#define GPIO127 __REG(0x40e10670)
-
-#define GPIO0_2 __REG(0x40e10674)
-#define GPIO1_2 __REG(0x40e10678)
-#define GPIO2_2 __REG(0x40e1067c)
-#define GPIO3_2 __REG(0x40e10680)
-#define GPIO4_2 __REG(0x40e10684)
-#define GPIO5_2 __REG(0x40e10688)
+/* PXA320 */
+#if defined(CONFIG_CPU_PXA320)
+#define DF_IO0 0x40e1024c
+#define DF_IO1 0x40e10254
+#define DF_IO2 0x40e1025c
+#define DF_IO3 0x40e10264
+#define DF_IO4 0x40e1026c
+#define DF_IO5 0x40e10274
+#define DF_IO6 0x40e1027c
+#define DF_IO7 0x40e10284
+#define DF_IO8 0x40e10250
+#define DF_IO9 0x40e10258
+#define DF_IO10 0x40e10260
+#define DF_IO11 0x40e10268
+#define DF_IO12 0x40e10270
+#define DF_IO13 0x40e10278
+#define DF_IO14 0x40e10280
+#define DF_IO15 0x40e10288
+#define DF_CLE_nOE 0x40e10204
+#define DF_ALE_nWE1 0x40e10208
+#define DF_ALE_nWE2 0x40e1021c
+#define DF_SCLK_E 0x40e10210
+#define DF_nCS0 0x40e10224
+#define DF_nCS1 0x40e10228
+#define nBE0 0x40e10214
+#define nBE1 0x40e10218
+#define nLUA 0x40e10234
+#define nLLA 0x40e10238
+#define DF_ADDR0 0x40e1023c
+#define DF_ADDR1 0x40e10240
+#define DF_ADDR2 0x40e10244
+#define DF_ADDR3 0x40e10248
+#define DF_INT_RnB 0x40e10220
+#define DF_nCS0 0x40e10224
+#define DF_nCS1 0x40e10228
+#define DF_nWE 0x40e1022c
+#define DF_nRE 0x40e10230
+
+#define nXCVREN 0x40e10138
+
+#define GPIO0 0x40e10124
+#define GPIO1 0x40e10128
+#define GPIO2 0x40e1012c
+#define GPIO3 0x40e10130
+#define GPIO4 0x40e10134
+#define GPIO5 0x40e1028c
+#define GPIO6 0x40e10290
+#define GPIO7 0x40e10294
+#define GPIO8 0x40e10298
+#define GPIO9 0x40e1029c
+#define GPIO10 0x40e10458
+#define GPIO11 0x40e102a0
+#define GPIO12 0x40e102a4
+#define GPIO13 0x40e102a8
+#define GPIO14 0x40e102ac
+#define GPIO15 0x40e102b0
+#define GPIO16 0x40e102b4
+#define GPIO17 0x40e102b8
+#define GPIO18 0x40e102bc
+#define GPIO19 0x40e102c0
+#define GPIO20 0x40e102c4
+#define GPIO21 0x40e102c8
+#define GPIO22 0x40e102cc
+#define GPIO23 0x40e102d0
+#define GPIO24 0x40e102d4
+#define GPIO25 0x40e102d8
+#define GPIO26 0x40e102dc
+
+#define GPIO27 0x40e10400
+#define GPIO28 0x40e10404
+#define GPIO29 0x40e10408
+#define GPIO30 0x40e1040c
+#define GPIO31 0x40e10410
+#define GPIO32 0x40e10414
+#define GPIO33 0x40e10418
+#define GPIO34 0x40e1041c
+#define GPIO35 0x40e10420
+#define GPIO36 0x40e10424
+#define GPIO37 0x40e10428
+#define GPIO38 0x40e1042c
+#define GPIO39 0x40e10430
+#define GPIO40 0x40e10434
+#define GPIO41 0x40e10438
+#define GPIO42 0x40e1043c
+#define GPIO43 0x40e10440
+#define GPIO44 0x40e10444
+#define GPIO45 0x40e10448
+#define GPIO46 0x40e1044c
+#define GPIO47 0x40e10450
+#define GPIO48 0x40e10454
+#define GPIO49 0x40e1045c
+#define GPIO50 0x40e10460
+#define GPIO51 0x40e10464
+#define GPIO52 0x40e10468
+#define GPIO53 0x40e1046c
+#define GPIO54 0x40e10470
+#define GPIO55 0x40e10474
+#define GPIO56 0x40e10478
+#define GPIO57 0x40e1047c
+#define GPIO58 0x40e10480
+#define GPIO59 0x40e10484
+#define GPIO60 0x40e10488
+#define GPIO61 0x40e1048c
+#define GPIO62 0x40e10490
+
+#define GPIO6_2 0x40e10494
+#define GPIO7_2 0x40e10498
+#define GPIO8_2 0x40e1049c
+#define GPIO9_2 0x40e104a0
+#define GPIO10_2 0x40e104a4
+#define GPIO11_2 0x40e104a8
+#define GPIO12_2 0x40e104ac
+#define GPIO13_2 0x40e104b0
+
+#define GPIO63 0x40e104b4
+#define GPIO64 0x40e104b8
+#define GPIO65 0x40e104bc
+#define GPIO66 0x40e104c0
+#define GPIO67 0x40e104c4
+#define GPIO68 0x40e104c8
+#define GPIO69 0x40e104cc
+#define GPIO70 0x40e104d0
+#define GPIO71 0x40e104d4
+#define GPIO72 0x40e104d8
+#define GPIO73 0x40e104dc
+
+#define GPIO14_2 0x40e104e0
+#define GPIO15_2 0x40e104e4
+#define GPIO16_2 0x40e104e8
+#define GPIO17_2 0x40e104ec
+
+#define GPIO74 0x40e104f0
+#define GPIO75 0x40e104f4
+#define GPIO76 0x40e104f8
+#define GPIO77 0x40e104fc
+#define GPIO78 0x40e10500
+#define GPIO79 0x40e10504
+#define GPIO80 0x40e10508
+#define GPIO81 0x40e1050c
+#define GPIO82 0x40e10510
+#define GPIO83 0x40e10514
+#define GPIO84 0x40e10518
+#define GPIO85 0x40e1051c
+#define GPIO86 0x40e10520
+#define GPIO87 0x40e10524
+#define GPIO88 0x40e10528
+#define GPIO89 0x40e1052c
+#define GPIO90 0x40e10530
+#define GPIO91 0x40e10534
+#define GPIO92 0x40e10538
+#define GPIO93 0x40e1053c
+#define GPIO94 0x40e10540
+#define GPIO95 0x40e10544
+#define GPIO96 0x40e10548
+#define GPIO97 0x40e1054c
+#define GPIO98 0x40e10550
+
+#define GPIO99 0x40e10600
+#define GPIO100 0x40e10604
+#define GPIO101 0x40e10608
+#define GPIO102 0x40e1060c
+#define GPIO103 0x40e10610
+#define GPIO104 0x40e10614
+#define GPIO105 0x40e10618
+#define GPIO106 0x40e1061c
+#define GPIO107 0x40e10620
+#define GPIO108 0x40e10624
+#define GPIO109 0x40e10628
+#define GPIO110 0x40e1062c
+#define GPIO111 0x40e10630
+#define GPIO112 0x40e10634
+
+#define GPIO113 0x40e10638
+#define GPIO114 0x40e1063c
+#define GPIO115 0x40e10640
+#define GPIO116 0x40e10644
+#define GPIO117 0x40e10648
+#define GPIO118 0x40e1064c
+#define GPIO119 0x40e10650
+#define GPIO120 0x40e10654
+#define GPIO121 0x40e10658
+#define GPIO122 0x40e1065c
+#define GPIO123 0x40e10660
+#define GPIO124 0x40e10664
+#define GPIO125 0x40e10668
+#define GPIO126 0x40e1066c
+#define GPIO127 0x40e10670
+
+#define GPIO0_2 0x40e10674
+#define GPIO1_2 0x40e10678
+#define GPIO2_2 0x40e1067c
+#define GPIO3_2 0x40e10680
+#define GPIO4_2 0x40e10684
+#define GPIO5_2 0x40e10688
+
+/* PXA300 and PXA310 */
+#elif defined(CONFIG_CPU_PXA300) || defined(CONFIG_CPU_PXA310)
+#define DF_IO0 0x40e10220
+#define DF_IO1 0x40e10228
+#define DF_IO2 0x40e10230
+#define DF_IO3 0x40e10238
+#define DF_IO4 0x40e10258
+#define DF_IO5 0x40e10260
+#define DF_IO7 0x40e10270
+#define DF_IO6 0x40e10268
+#define DF_IO8 0x40e10224
+#define DF_IO9 0x40e1022c
+#define DF_IO10 0x40e10234
+#define DF_IO11 0x40e1023c
+#define DF_IO12 0x40e1025c
+#define DF_IO13 0x40e10264
+#define DF_IO14 0x40e1026c
+#define DF_IO15 0x40e10274
+#define DF_CLE_NOE 0x40e10240
+#define DF_ALE_nWE 0x40e1020c
+#define DF_SCLK_E 0x40e10250
+#define nCS0 0x40e100c4
+#define nCS1 0x40e100c0
+#define nBE0 0x40e10204
+#define nBE1 0x40e10208
+#define nLUA 0x40e10244
+#define nLLA 0x40e10254
+#define DF_ADDR0 0x40e10210
+#define DF_ADDR1 0x40e10214
+#define DF_ADDR2 0x40e10218
+#define DF_ADDR3 0x40e1021c
+#define DF_INT_RnB 0x40e100c8
+#define DF_nCS0 0x40e10248
+#define DF_nCS1 0x40e10278
+#define DF_nWE 0x40e100cc
+#define DF_nRE 0x40e10200
+
+#define GPIO0 0x40e100b4
+#define GPIO1 0x40e100b8
+#define GPIO2 0x40e100bc
+#define GPIO3 0x40e1027c
+#define GPIO4 0x40e10280
+
+#define GPIO5 0x40e10284
+#define GPIO6 0x40e10288
+#define GPIO7 0x40e1028c
+#define GPIO8 0x40e10290
+#define GPIO9 0x40e10294
+#define GPIO10 0x40e10298
+#define GPIO11 0x40e1029c
+#define GPIO12 0x40e102a0
+#define GPIO13 0x40e102a4
+#define GPIO14 0x40e102a8
+#define GPIO15 0x40e102ac
+#define GPIO16 0x40e102b0
+#define GPIO17 0x40e102b4
+#define GPIO18 0x40e102b8
+#define GPIO19 0x40e102bc
+#define GPIO20 0x40e102c0
+#define GPIO21 0x40e102c4
+#define GPIO22 0x40e102c8
+#define GPIO23 0x40e102cc
+#define GPIO24 0x40e102d0
+#define GPIO25 0x40e102d4
+#define GPIO26 0x40e102d8
+
+#define GPIO27 0x40e10400
+#define GPIO28 0x40e10404
+#define GPIO29 0x40e10408
+#define ULPI_STP 0x40e1040c
+#define ULPI_NXT 0x40e10410
+#define ULPI_DIR 0x40e10414
+#define GPIO30 0x40e10418
+#define GPIO31 0x40e1041c
+#define GPIO32 0x40e10420
+#define GPIO33 0x40e10424
+#define GPIO34 0x40e10428
+#define GPIO35 0x40e1042c
+#define GPIO36 0x40e10430
+#define GPIO37 0x40e10434
+#define GPIO38 0x40e10438
+#define GPIO39 0x40e1043c
+#define GPIO40 0x40e10440
+#define GPIO41 0x40e10444
+#define GPIO42 0x40e10448
+#define GPIO43 0x40e1044c
+#define GPIO44 0x40e10450
+#define GPIO45 0x40e10454
+#define GPIO46 0x40e10458
+#define GPIO47 0x40e1045c
+#define GPIO48 0x40e10460
+
+#define GPIO49 0x40e10464
+#define GPIO50 0x40e10468
+#define GPIO51 0x40e1046c
+#define GPIO52 0x40e10470
+#define GPIO53 0x40e10474
+#define GPIO54 0x40e10478
+#define GPIO55 0x40e1047c
+#define GPIO56 0x40e10480
+#define GPIO57 0x40e10484
+#define GPIO58 0x40e10488
+#define GPIO59 0x40e1048c
+#define GPIO60 0x40e10490
+#define GPIO61 0x40e10494
+#define GPIO62 0x40e10498
+#define GPIO63 0x40e1049c
+#define GPIO64 0x40e104a0
+#define GPIO65 0x40e104a4
+#define GPIO66 0x40e104a8
+#define GPIO67 0x40e104ac
+#define GPIO68 0x40e104b0
+#define GPIO69 0x40e104b4
+#define GPIO70 0x40e104b8
+#define GPIO71 0x40e104bc
+#define GPIO72 0x40e104c0
+#define GPIO73 0x40e104c4
+#define GPIO74 0x40e104c8
+#define GPIO75 0x40e104cc
+#define GPIO76 0x40e104d0
+#define GPIO77 0x40e104d4
+#define GPIO78 0x40e104d8
+#define GPIO79 0x40e104dc
+#define GPIO80 0x40e104e0
+#define GPIO81 0x40e104e4
+#define GPIO82 0x40e104e8
+#define GPIO83 0x40e104ec
+#define GPIO84 0x40e104f0
+#define GPIO85 0x40e104f4
+#define GPIO86 0x40e104f8
+#define GPIO87 0x40e104fc
+#define GPIO88 0x40e10500
+#define GPIO89 0x40e10504
+#define GPIO90 0x40e10508
+#define GPIO91 0x40e1050c
+#define GPIO92 0x40e10510
+#define GPIO93 0x40e10514
+#define GPIO94 0x40e10518
+#define GPIO95 0x40e1051c
+#define GPIO96 0x40e10520
+#define GPIO97 0x40e10524
+#define GPIO98 0x40e10528
+
+#define GPIO99 0x40e10600
+#define GPIO100 0x40e10604
+#define GPIO101 0x40e10608
+#define GPIO102 0x40e1060c
+#define GPIO103 0x40e10610
+#define GPIO104 0x40e10614
+#define GPIO105 0x40e10618
+#define GPIO106 0x40e1061c
+#define GPIO107 0x40e10620
+#define GPIO108 0x40e10624
+#define GPIO109 0x40e10628
+#define GPIO110 0x40e1062c
+#define GPIO111 0x40e10630
+#define GPIO112 0x40e10634
+
+#define GPIO113 0x40e10638
+#define GPIO114 0x40e1063c
+#define GPIO115 0x40e10640
+#define GPIO116 0x40e10644
+#define GPIO117 0x40e10648
+#define GPIO118 0x40e1064c
+#define GPIO119 0x40e10650
+#define GPIO120 0x40e10654
+#define GPIO121 0x40e10658
+#define GPIO122 0x40e1065c
+#define GPIO123 0x40e10660
+#define GPIO124 0x40e10664
+#define GPIO125 0x40e10668
+#define GPIO126 0x40e1066c
+#define GPIO127 0x40e10670
+
+#define GPIO0_2 0x40e10674
+#define GPIO1_2 0x40e10678
+#define GPIO2_2 0x40e102dc
+#define GPIO3_2 0x40e102e0
+#define GPIO4_2 0x40e102e4
+#define GPIO5_2 0x40e102e8
+#define GPIO6_2 0x40e102ec
+
+#ifndef CONFIG_CPU_PXA300 /* PXA310 only */
+#define GPIO7_2 0x40e1052c
+#define GPIO8_2 0x40e10530
+#define GPIO9_2 0x40e10534
+#define GPIO10_2 0x40e10538
+#endif
+#endif
+#ifdef CONFIG_CPU_MONAHANS
/* MFPR Bit Definitions, see 4-10, Vol. 1 */
#define PULL_SEL 0x8000
#define PULLUP_EN 0x4000
@@ -1470,62 +1854,8 @@ typedef void (*ExcpHndlr) (void) ;
#define AF_SEL_6 0x6 /* Alternate function 6 */
#define AF_SEL_7 0x7 /* Alternate function 7 */
-
-#else /* CONFIG_CPU_MONAHANS */
-
-#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */
-#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */
-#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */
-#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */
-#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */
-#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO 80 */
#endif /* CONFIG_CPU_MONAHANS */
-/* More handy macros. The argument is a literal GPIO number. */
-
-#define GPIO_bit(x) (1 << ((x) & 0x1f))
-
-#ifdef CONFIG_PXA27X
-
-/* Interrupt Controller */
-
-#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
-#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
-#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
-
-#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
-#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
-#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
-#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
-#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
-#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
-#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
-#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
- ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-#else
-
-#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#endif
-
/* GPIO alternate function assignments */
#define GPIO1_RST 1 /* reset */
@@ -1732,63 +2062,63 @@ typedef void (*ExcpHndlr) (void) ;
*/
#ifdef CONFIG_CPU_MONAHANS
-#define ASCR __REG(0x40F40000) /* Application Subsystem Power Status/Control Register */
-#define ARSR __REG(0x40F40004) /* Application Subsystem Reset Status Register */
-#define AD3ER __REG(0x40F40008) /* Application Subsystem D3 state Wakeup Enable Register */
-#define AD3SR __REG(0x40F4000C) /* Application Subsystem D3 state Wakeup Status Register */
-#define AD2D0ER __REG(0x40F40010) /* Application Subsystem D2 to D0 state Wakeup Enable Register */
-#define AD2D0SR __REG(0x40F40014) /* Application Subsystem D2 to D0 state Wakeup Status Register */
-#define AD2D1ER __REG(0x40F40018) /* Application Subsystem D2 to D1 state Wakeup Enable Register */
-#define AD2D1SR __REG(0x40F4001C) /* Application Subsystem D2 to D1 state Wakeup Status Register */
-#define AD1D0ER __REG(0x40F40020) /* Application Subsystem D1 to D0 state Wakeup Enable Register */
-#define AD1D0SR __REG(0x40F40024) /* Application Subsystem D1 to D0 state Wakeup Status Register */
-#define ASDCNT __REG(0x40F40028) /* Application Subsystem SRAM Drowsy Count Register */
-#define AD3R __REG(0x40F40030) /* Application Subsystem D3 State Configuration Register */
-#define AD2R __REG(0x40F40034) /* Application Subsystem D2 State Configuration Register */
-#define AD1R __REG(0x40F40038) /* Application Subsystem D1 State Configuration Register */
-
-#define PMCR __REG(0x40F50000) /* Power Manager Control Register */
-#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */
-#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */
-#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */
-#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */
-#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */
-#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */
-#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */
-#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */
-#define PCMD(x) __REG(0x40F50110 + x*4)
-#define PCMD0 __REG(0x40F50110 + 0 * 4)
-#define PCMD1 __REG(0x40F50110 + 1 * 4)
-#define PCMD2 __REG(0x40F50110 + 2 * 4)
-#define PCMD3 __REG(0x40F50110 + 3 * 4)
-#define PCMD4 __REG(0x40F50110 + 4 * 4)
-#define PCMD5 __REG(0x40F50110 + 5 * 4)
-#define PCMD6 __REG(0x40F50110 + 6 * 4)
-#define PCMD7 __REG(0x40F50110 + 7 * 4)
-#define PCMD8 __REG(0x40F50110 + 8 * 4)
-#define PCMD9 __REG(0x40F50110 + 9 * 4)
-#define PCMD10 __REG(0x40F50110 + 10 * 4)
-#define PCMD11 __REG(0x40F50110 + 11 * 4)
-#define PCMD12 __REG(0x40F50110 + 12 * 4)
-#define PCMD13 __REG(0x40F50110 + 13 * 4)
-#define PCMD14 __REG(0x40F50110 + 14 * 4)
-#define PCMD15 __REG(0x40F50110 + 15 * 4)
-#define PCMD16 __REG(0x40F50110 + 16 * 4)
-#define PCMD17 __REG(0x40F50110 + 17 * 4)
-#define PCMD18 __REG(0x40F50110 + 18 * 4)
-#define PCMD19 __REG(0x40F50110 + 19 * 4)
-#define PCMD20 __REG(0x40F50110 + 20 * 4)
-#define PCMD21 __REG(0x40F50110 + 21 * 4)
-#define PCMD22 __REG(0x40F50110 + 22 * 4)
-#define PCMD23 __REG(0x40F50110 + 23 * 4)
-#define PCMD24 __REG(0x40F50110 + 24 * 4)
-#define PCMD25 __REG(0x40F50110 + 25 * 4)
-#define PCMD26 __REG(0x40F50110 + 26 * 4)
-#define PCMD27 __REG(0x40F50110 + 27 * 4)
-#define PCMD28 __REG(0x40F50110 + 28 * 4)
-#define PCMD29 __REG(0x40F50110 + 29 * 4)
-#define PCMD30 __REG(0x40F50110 + 30 * 4)
-#define PCMD31 __REG(0x40F50110 + 31 * 4)
+#define ASCR 0x40F40000 /* Application Subsystem Power Status/Control Register */
+#define ARSR 0x40F40004 /* Application Subsystem Reset Status Register */
+#define AD3ER 0x40F40008 /* Application Subsystem D3 state Wakeup Enable Register */
+#define AD3SR 0x40F4000C /* Application Subsystem D3 state Wakeup Status Register */
+#define AD2D0ER 0x40F40010 /* Application Subsystem D2 to D0 state Wakeup Enable Register */
+#define AD2D0SR 0x40F40014 /* Application Subsystem D2 to D0 state Wakeup Status Register */
+#define AD2D1ER 0x40F40018 /* Application Subsystem D2 to D1 state Wakeup Enable Register */
+#define AD2D1SR 0x40F4001C /* Application Subsystem D2 to D1 state Wakeup Status Register */
+#define AD1D0ER 0x40F40020 /* Application Subsystem D1 to D0 state Wakeup Enable Register */
+#define AD1D0SR 0x40F40024 /* Application Subsystem D1 to D0 state Wakeup Status Register */
+#define ASDCNT 0x40F40028 /* Application Subsystem SRAM Drowsy Count Register */
+#define AD3R 0x40F40030 /* Application Subsystem D3 State Configuration Register */
+#define AD2R 0x40F40034 /* Application Subsystem D2 State Configuration Register */
+#define AD1R 0x40F40038 /* Application Subsystem D1 State Configuration Register */
+
+#define PMCR 0x40F50000 /* Power Manager Control Register */
+#define PSR 0x40F50004 /* Power Manager S2 Status Register */
+#define PSPR 0x40F50008 /* Power Manager Scratch Pad Register */
+#define PCFR 0x40F5000C /* Power Manager General Configuration Register */
+#define PWER 0x40F50010 /* Power Manager Wake-up Enable Register */
+#define PWSR 0x40F50014 /* Power Manager Wake-up Status Register */
+#define PECR 0x40F50018 /* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR 0x40F50080 /* DC-DC Controller Status Register */
+#define PVCR 0x40F50100 /* Power Manager Voltage Change Control Register */
+#define PCMD(x) (0x40F50110 + x*4)
+#define PCMD0 (0x40F50110 + 0 * 4)
+#define PCMD1 (0x40F50110 + 1 * 4)
+#define PCMD2 (0x40F50110 + 2 * 4)
+#define PCMD3 (0x40F50110 + 3 * 4)
+#define PCMD4 (0x40F50110 + 4 * 4)
+#define PCMD5 (0x40F50110 + 5 * 4)
+#define PCMD6 (0x40F50110 + 6 * 4)
+#define PCMD7 (0x40F50110 + 7 * 4)
+#define PCMD8 (0x40F50110 + 8 * 4)
+#define PCMD9 (0x40F50110 + 9 * 4)
+#define PCMD10 (0x40F50110 + 10 * 4)
+#define PCMD11 (0x40F50110 + 11 * 4)
+#define PCMD12 (0x40F50110 + 12 * 4)
+#define PCMD13 (0x40F50110 + 13 * 4)
+#define PCMD14 (0x40F50110 + 14 * 4)
+#define PCMD15 (0x40F50110 + 15 * 4)
+#define PCMD16 (0x40F50110 + 16 * 4)
+#define PCMD17 (0x40F50110 + 17 * 4)
+#define PCMD18 (0x40F50110 + 18 * 4)
+#define PCMD19 (0x40F50110 + 19 * 4)
+#define PCMD20 (0x40F50110 + 20 * 4)
+#define PCMD21 (0x40F50110 + 21 * 4)
+#define PCMD22 (0x40F50110 + 22 * 4)
+#define PCMD23 (0x40F50110 + 23 * 4)
+#define PCMD24 (0x40F50110 + 24 * 4)
+#define PCMD25 (0x40F50110 + 25 * 4)
+#define PCMD26 (0x40F50110 + 26 * 4)
+#define PCMD27 (0x40F50110 + 27 * 4)
+#define PCMD28 (0x40F50110 + 28 * 4)
+#define PCMD29 (0x40F50110 + 29 * 4)
+#define PCMD30 (0x40F50110 + 30 * 4)
+#define PCMD31 (0x40F50110 + 31 * 4)
#define PCMD_MBC (1<<12)
#define PCMD_DCE (1<<11)
@@ -1798,64 +2128,64 @@ typedef void (*ExcpHndlr) (void) ;
#define PVCR_FVC (0x1 << 28)
#define PVCR_VCSA (0x1<<14)
#define PVCR_CommandDelay (0xf80)
-#define PVCR_ReadPointer (0x01f00000)
+#define PVCR_ReadPointer 0x01f00000
#define PVCR_SlaveAddress (0x7f)
#else /* ifdef CONFIG_CPU_MONAHANS */
-#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
-#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
-#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
-#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
-#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
-#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
-#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
-#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
-#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
-#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
-#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
-#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
-#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
-
-#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
-#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */
-#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */
-#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */
-#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
-#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
-#define PCMD(x) __REG(0x40F00080 + x*4)
-#define PCMD0 __REG(0x40F00080 + 0 * 4)
-#define PCMD1 __REG(0x40F00080 + 1 * 4)
-#define PCMD2 __REG(0x40F00080 + 2 * 4)
-#define PCMD3 __REG(0x40F00080 + 3 * 4)
-#define PCMD4 __REG(0x40F00080 + 4 * 4)
-#define PCMD5 __REG(0x40F00080 + 5 * 4)
-#define PCMD6 __REG(0x40F00080 + 6 * 4)
-#define PCMD7 __REG(0x40F00080 + 7 * 4)
-#define PCMD8 __REG(0x40F00080 + 8 * 4)
-#define PCMD9 __REG(0x40F00080 + 9 * 4)
-#define PCMD10 __REG(0x40F00080 + 10 * 4)
-#define PCMD11 __REG(0x40F00080 + 11 * 4)
-#define PCMD12 __REG(0x40F00080 + 12 * 4)
-#define PCMD13 __REG(0x40F00080 + 13 * 4)
-#define PCMD14 __REG(0x40F00080 + 14 * 4)
-#define PCMD15 __REG(0x40F00080 + 15 * 4)
-#define PCMD16 __REG(0x40F00080 + 16 * 4)
-#define PCMD17 __REG(0x40F00080 + 17 * 4)
-#define PCMD18 __REG(0x40F00080 + 18 * 4)
-#define PCMD19 __REG(0x40F00080 + 19 * 4)
-#define PCMD20 __REG(0x40F00080 + 20 * 4)
-#define PCMD21 __REG(0x40F00080 + 21 * 4)
-#define PCMD22 __REG(0x40F00080 + 22 * 4)
-#define PCMD23 __REG(0x40F00080 + 23 * 4)
-#define PCMD24 __REG(0x40F00080 + 24 * 4)
-#define PCMD25 __REG(0x40F00080 + 25 * 4)
-#define PCMD26 __REG(0x40F00080 + 26 * 4)
-#define PCMD27 __REG(0x40F00080 + 27 * 4)
-#define PCMD28 __REG(0x40F00080 + 28 * 4)
-#define PCMD29 __REG(0x40F00080 + 29 * 4)
-#define PCMD30 __REG(0x40F00080 + 30 * 4)
-#define PCMD31 __REG(0x40F00080 + 31 * 4)
+#define PMCR 0x40F00000 /* Power Manager Control Register */
+#define PSSR 0x40F00004 /* Power Manager Sleep Status Register */
+#define PSPR 0x40F00008 /* Power Manager Scratch Pad Register */
+#define PWER 0x40F0000C /* Power Manager Wake-up Enable Register */
+#define PRER 0x40F00010 /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER 0x40F00014 /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR 0x40F00018 /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR 0x40F0001C /* Power Manager General Configuration Register */
+#define PGSR0 0x40F00020 /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1 0x40F00024 /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2 0x40F00028 /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3 0x40F0002C /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR 0x40F00030 /* Reset Controller Status Register */
+
+#define PSLR 0x40F00034 /* Power Manager Sleep Config Register */
+#define PSTR 0x40F00038 /* Power Manager Standby Config Register */
+#define PSNR 0x40F0003C /* Power Manager Sense Config Register */
+#define PVCR 0x40F00040 /* Power Manager VoltageControl Register */
+#define PKWR 0x40F00050 /* Power Manager KB Wake-up Enable Reg */
+#define PKSR 0x40F00054 /* Power Manager KB Level-Detect Register */
+#define PCMD(x) (0x40F00080 + x*4)
+#define PCMD0 (0x40F00080 + 0 * 4)
+#define PCMD1 (0x40F00080 + 1 * 4)
+#define PCMD2 (0x40F00080 + 2 * 4)
+#define PCMD3 (0x40F00080 + 3 * 4)
+#define PCMD4 (0x40F00080 + 4 * 4)
+#define PCMD5 (0x40F00080 + 5 * 4)
+#define PCMD6 (0x40F00080 + 6 * 4)
+#define PCMD7 (0x40F00080 + 7 * 4)
+#define PCMD8 (0x40F00080 + 8 * 4)
+#define PCMD9 (0x40F00080 + 9 * 4)
+#define PCMD10 (0x40F00080 + 10 * 4)
+#define PCMD11 (0x40F00080 + 11 * 4)
+#define PCMD12 (0x40F00080 + 12 * 4)
+#define PCMD13 (0x40F00080 + 13 * 4)
+#define PCMD14 (0x40F00080 + 14 * 4)
+#define PCMD15 (0x40F00080 + 15 * 4)
+#define PCMD16 (0x40F00080 + 16 * 4)
+#define PCMD17 (0x40F00080 + 17 * 4)
+#define PCMD18 (0x40F00080 + 18 * 4)
+#define PCMD19 (0x40F00080 + 19 * 4)
+#define PCMD20 (0x40F00080 + 20 * 4)
+#define PCMD21 (0x40F00080 + 21 * 4)
+#define PCMD22 (0x40F00080 + 22 * 4)
+#define PCMD23 (0x40F00080 + 23 * 4)
+#define PCMD24 (0x40F00080 + 24 * 4)
+#define PCMD25 (0x40F00080 + 25 * 4)
+#define PCMD26 (0x40F00080 + 26 * 4)
+#define PCMD27 (0x40F00080 + 27 * 4)
+#define PCMD28 (0x40F00080 + 28 * 4)
+#define PCMD29 (0x40F00080 + 29 * 4)
+#define PCMD30 (0x40F00080 + 30 * 4)
+#define PCMD31 (0x40F00080 + 31 * 4)
#define PCMD_MBC (1<<12)
#define PCMD_DCE (1<<11)
@@ -1891,183 +2221,58 @@ typedef void (*ExcpHndlr) (void) ;
/*
* SSP Serial Port Registers
*/
-#define SSCR0 __REG(0x41000000) /* SSP Control Register 0 */
-#define SSCR1 __REG(0x41000004) /* SSP Control Register 1 */
-#define SSSR __REG(0x41000008) /* SSP Status Register */
-#define SSITR __REG(0x4100000C) /* SSP Interrupt Test Register */
-#define SSDR __REG(0x41000010) /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
+#define SSCR0 0x41000000 /* SSP Control Register 0 */
+#define SSCR1 0x41000004 /* SSP Control Register 1 */
+#define SSSR 0x41000008 /* SSP Status Register */
+#define SSITR 0x4100000C /* SSP Interrupt Test Register */
+#define SSDR 0x41000010 /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
/*
* MultiMediaCard (MMC) controller
*/
-#define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */
-#define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */
-#define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */
-#define MMC_SPI __REG(0x4110000c) /* SPI mode control bits */
-#define MMC_CMDAT __REG(0x41100010) /* Command/response/data sequence control */
-#define MMC_RESTO __REG(0x41100014) /* Expected response time out */
-#define MMC_RDTO __REG(0x41100018) /* Expected data read time out */
-#define MMC_BLKLEN __REG(0x4110001c) /* Block length of data transaction */
-#define MMC_NOB __REG(0x41100020) /* Number of blocks, for block mode */
-#define MMC_PRTBUF __REG(0x41100024) /* Partial MMC_TXFIFO FIFO written */
-#define MMC_I_MASK __REG(0x41100028) /* Interrupt Mask */
-#define MMC_I_REG __REG(0x4110002c) /* Interrupt Register (read only) */
-#define MMC_CMD __REG(0x41100030) /* Index of current command */
-#define MMC_ARGH __REG(0x41100034) /* MSW part of the current command argument */
-#define MMC_ARGL __REG(0x41100038) /* LSW part of the current command argument */
-#define MMC_RES __REG(0x4110003c) /* Response FIFO (read only) */
-#define MMC_RXFIFO __REG(0x41100040) /* Receive FIFO (read only) */
-#define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */
-
-/*
- * Core Clock
- */
-
-#if defined(CONFIG_CPU_MONAHANS)
-#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */
-#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */
-#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */
-#define CKENA __REG(0x4134000C) /* A Clock Enable Register */
-#define CKENB __REG(0x41340010) /* B Clock Enable Register */
-#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */
-
-#define ACCR_SMC_MASK 0x03800000 /* Static Memory Controller Frequency Select */
-#define ACCR_SRAM_MASK 0x000c0000 /* SRAM Controller Frequency Select */
-#define ACCR_FC_MASK 0x00030000 /* Frequency Change Frequency Select */
-#define ACCR_HSIO_MASK 0x0000c000 /* High Speed IO Frequency Select */
-#define ACCR_DDR_MASK 0x00003000 /* DDR Memory Controller Frequency Select */
-#define ACCR_XN_MASK 0x00000700 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define ACCR_XL_MASK 0x0000001f /* Crystal Frequency to Memory Frequency Multiplier */
-#define ACCR_XPDIS (1 << 31)
-#define ACCR_SPDIS (1 << 30)
-#define ACCR_13MEND1 (1 << 27)
-#define ACCR_D0CS (1 << 26)
-#define ACCR_13MEND2 (1 << 21)
-#define ACCR_PCCE (1 << 11)
-
-#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */
-#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */
-#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */
-#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */
-#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */
-#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */
-#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */
-#define CKENA_23_STUART (1 << 23) /* STUART Unit Clock Enable */
-#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */
-#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */
-#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */
-#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */
-#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */
-#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */
-#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */
-#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */
-#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */
-#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */
-#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */
-#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */
-#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */
-#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */
-#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */
-#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */
-#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */
-#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */
-#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */
-#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */
-
-#define CKENB_9_SYSBUS2 (1 << 9) /* System bus 2 */
-#define CKENB_8_1WIRE (1 << 8) /* One Wire Interface Unit Clock Enable */
-#define CKENB_7_GPIO (1 << 7) /* GPIO Clock Enable */
-#define CKENB_6_IRQ (1 << 6) /* Interrupt Controller Clock Enable */
-#define CKENB_4_I2C (1 << 4) /* I2C Unit Clock Enable */
-#define CKENB_1_PWM1 (1 << 1) /* PWM2 & PWM3 Clock Enable */
-#define CKENB_0_PWM0 (1 << 0) /* PWM0 & PWM1 Clock Enable */
-
-#else /* if defined CONFIG_CPU_MONAHANS */
-
-#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
-#define CKEN __REG(0x41300004) /* Clock Enable Register */
-#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
-
-#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#if !defined(CONFIG_PXA27X)
-#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
-#endif
-#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */
-#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */
-#define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */
-#define CKEN21_MEMSTK (1 << 21) /* Memory Stick Host Controller */
-#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */
-#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */
-#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */
-#define CKEN17_MSL (1 << 17) /* MSL Unit Clock Enable */
-#define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */
-#define CKEN15_PWRI2C (1 << 15) /* PWR I2C Unit Clock Enable */
-#define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */
-#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */
-#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */
-#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */
-#if defined(CONFIG_PXA27X)
-#define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */
-#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */
-#endif
-#define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */
-#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */
-#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */
-#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */
-#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */
-#define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */
-#define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */
-#define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */
-
-#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
-#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
-
-#if !defined(CONFIG_PXA27X)
-#define CCCR_L09 (0x1F)
-#define CCCR_L27 (0x1)
-#define CCCR_L32 (0x2)
-#define CCCR_L36 (0x3)
-#define CCCR_L40 (0x4)
-#define CCCR_L45 (0x5)
-
-#define CCCR_M1 (0x1 << 5)
-#define CCCR_M2 (0x2 << 5)
-#define CCCR_M4 (0x3 << 5)
-
-#define CCCR_N10 (0x2 << 7)
-#define CCCR_N15 (0x3 << 7)
-#define CCCR_N20 (0x4 << 7)
-#define CCCR_N25 (0x5 << 7)
-#define CCCR_N30 (0x6 << 7)
-#endif
+#define MMC_STRPCL 0x41100000 /* Control to start and stop MMC clock */
+#define MMC_STAT 0x41100004 /* MMC Status Register (read only) */
+#define MMC_CLKRT 0x41100008 /* MMC clock rate */
+#define MMC_SPI 0x4110000c /* SPI mode control bits */
+#define MMC_CMDAT 0x41100010 /* Command/response/data sequence control */
+#define MMC_RESTO 0x41100014 /* Expected response time out */
+#define MMC_RDTO 0x41100018 /* Expected data read time out */
+#define MMC_BLKLEN 0x4110001c /* Block length of data transaction */
+#define MMC_NOB 0x41100020 /* Number of blocks, for block mode */
+#define MMC_PRTBUF 0x41100024 /* Partial MMC_TXFIFO FIFO written */
+#define MMC_I_MASK 0x41100028 /* Interrupt Mask */
+#define MMC_I_REG 0x4110002c /* Interrupt Register (read only) */
+#define MMC_CMD 0x41100030 /* Index of current command */
+#define MMC_ARGH 0x41100034 /* MSW part of the current command argument */
+#define MMC_ARGL 0x41100038 /* LSW part of the current command argument */
+#define MMC_RES 0x4110003c /* Response FIFO (read only) */
+#define MMC_RXFIFO 0x41100040 /* Receive FIFO (read only) */
+#define MMC_TXFIFO 0x41100044 /* Transmit FIFO (write only) */
-#endif /* CONFIG_CPU_MONAHANS */
/*
* LCD
*/
-#define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */
-#define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */
-#define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */
-#define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */
-#define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */
-#define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */
-#define LCSR0 __REG(0x44000038) /* LCD Controller Status Register */
-#define LCSR1 __REG(0x44000034) /* LCD Controller Status Register */
-#define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */
-#define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */
-#define TMEDCR __REG(0x44000044) /* TMED Control Register */
-
-#define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */
-#define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */
-#define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */
-#define LDCMD0 __REG(0x4400020C) /* DMA Channel 0 Command Register */
-#define FDADR1 __REG(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */
-#define FSADR1 __REG(0x44000214) /* DMA Channel 1 Frame Source Address Register */
-#define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */
-#define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */
+#define LCCR0 0x44000000 /* LCD Controller Control Register 0 */
+#define LCCR1 0x44000004 /* LCD Controller Control Register 1 */
+#define LCCR2 0x44000008 /* LCD Controller Control Register 2 */
+#define LCCR3 0x4400000C /* LCD Controller Control Register 3 */
+#define DFBR0 0x44000020 /* DMA Channel 0 Frame Branch Register */
+#define DFBR1 0x44000024 /* DMA Channel 1 Frame Branch Register */
+#define LCSR0 0x44000038 /* LCD Controller Status Register */
+#define LCSR1 0x44000034 /* LCD Controller Status Register */
+#define LIIDR 0x4400003C /* LCD Controller Interrupt ID Register */
+#define TMEDRGBR 0x44000040 /* TMED RGB Seed Register */
+#define TMEDCR 0x44000044 /* TMED Control Register */
+
+#define FDADR0 0x44000200 /* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0 0x44000204 /* DMA Channel 0 Frame Source Address Register */
+#define FIDR0 0x44000208 /* DMA Channel 0 Frame ID Register */
+#define LDCMD0 0x4400020C /* DMA Channel 0 Command Register */
+#define FDADR1 0x44000210 /* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1 0x44000214 /* DMA Channel 1 Frame Source Address Register */
+#define FIDR1 0x44000218 /* DMA Channel 1 Frame ID Register */
+#define LDCMD1 0x4400021C /* DMA Channel 1 Command Register */
#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
#define LCCR0_CMS (1 << 1) /* Color = 0, Monochrome = 1 */
@@ -2135,22 +2340,12 @@ typedef void (*ExcpHndlr) (void) ;
/* [0..255 Tln] */ \
((Tln) << FShft (LCCR2_BFW))
-#if 0
-#define LCCR3_PCD (0xff) /* Pixel clock divisor */
-#define LCCR3_ACB (0xff << 8) /* AC Bias pin frequency */
-#define LCCR3_ACB_S 8
-#endif
-
#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */
#define LCCR3_API_S 16
#define LCCR3_VSP (1 << 20) /* vertical sync polarity */
#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */
#define LCCR3_PCP (1 << 22) /* pixel clock polarity */
#define LCCR3_OEP (1 << 23) /* output enable polarity */
-#if 0
-#define LCCR3_BPP (7 << 24) /* bits per pixel */
-#define LCCR3_BPP_S 24
-#endif
#define LCCR3_DPC (1 << 27) /* double pixel clock mode */
#define LCCR3_PDFOR_0 (0 << 30)
@@ -2231,46 +2426,49 @@ typedef void (*ExcpHndlr) (void) ;
*/
#ifdef CONFIG_CPU_MONAHANS
+
+/* PXA3xx */
+
/* Static Memory Controller Registers */
-#define MSC0 __REG_2(0x4A000008) /* Static Memory Control Register 0 */
-#define MSC1 __REG_2(0x4A00000C) /* Static Memory Control Register 1 */
-#define MECR __REG_2(0x4A000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXCNFG __REG_2(0x4A00001C) /* Synchronous Static Memory Control Register */
-#define MCMEM0 __REG_2(0x4A000028) /* Card interface Common Memory Space Socket 0 Timing */
-#define MCATT0 __REG_2(0x4A000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCIO0 __REG_2(0x4A000038) /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MEMCLKCFG __REG_2(0x4A000068) /* SCLK speed configuration */
-#define CSADRCFG0 __REG_2(0x4A000080) /* Address Configuration for chip select 0 */
-#define CSADRCFG1 __REG_2(0x4A000084) /* Address Configuration for chip select 1 */
-#define CSADRCFG2 __REG_2(0x4A000088) /* Address Configuration for chip select 2 */
-#define CSADRCFG3 __REG_2(0x4A00008C) /* Address Configuration for chip select 3 */
-#define CSADRCFG_P __REG_2(0x4A000090) /* Address Configuration for pcmcia card interface */
-#define CSMSADRCFG __REG_2(0x4A0000A0) /* Master Address Configuration Register */
-#define CLK_RET_DEL __REG_2(0x4A0000B0) /* Delay line and mux selects for return data latching for sync. flash */
-#define ADV_RET_DEL __REG_2(0x4A0000B4) /* Delay line and mux selects for return data latching for sync. flash */
+#define MSC0 0x4A000008 /* Static Memory Control Register 0 */
+#define MSC1 0x4A00000C /* Static Memory Control Register 1 */
+#define MECR 0x4A000014 /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXCNFG 0x4A00001C /* Synchronous Static Memory Control Register */
+#define MCMEM0 0x4A000028 /* Card interface Common Memory Space Socket 0 Timing */
+#define MCATT0 0x4A000030 /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCIO0 0x4A000038 /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MEMCLKCFG 0x4A000068 /* SCLK speed configuration */
+#define CSADRCFG0 0x4A000080 /* Address Configuration for chip select 0 */
+#define CSADRCFG1 0x4A000084 /* Address Configuration for chip select 1 */
+#define CSADRCFG2 0x4A000088 /* Address Configuration for chip select 2 */
+#define CSADRCFG3 0x4A00008C /* Address Configuration for chip select 3 */
+#define CSADRCFG_P 0x4A000090 /* Address Configuration for pcmcia card interface */
+#define CSMSADRCFG 0x4A0000A0 /* Master Address Configuration Register */
+#define CLK_RET_DEL 0x4A0000B0 /* Delay line and mux selects for return data latching for sync. flash */
+#define ADV_RET_DEL 0x4A0000B4 /* Delay line and mux selects for return data latching for sync. flash */
/* Dynamic Memory Controller Registers */
-#define MDCNFG __REG_2(0x48100000) /* SDRAM Configuration Register 0 */
-#define MDREFR __REG_2(0x48100004) /* SDRAM Refresh Control Register */
-#define FLYCNFG __REG_2(0x48100020) /* Fly-by DMA DVAL[1:0] polarities */
-#define MDMRS __REG_2(0x48100040) /* MRS value to be written to SDRAM */
-#define DDR_SCAL __REG_2(0x48100050) /* Software Delay Line Calibration/Configuration for external DDR memory. */
-#define DDR_HCAL __REG_2(0x48100060) /* Hardware Delay Line Calibration/Configuration for external DDR memory. */
-#define DDR_WCAL __REG_2(0x48100068) /* DDR Write Strobe Calibration Register */
-#define DMCIER __REG_2(0x48100070) /* Dynamic MC Interrupt Enable Register. */
-#define DMCISR __REG_2(0x48100078) /* Dynamic MC Interrupt Status Register. */
-#define DDR_DLS __REG_2(0x48100080) /* DDR Delay Line Value Status register for external DDR memory. */
-#define EMPI __REG_2(0x48100090) /* EMPI Control Register */
-#define RCOMP __REG_2(0x48100100)
-#define PAD_MA __REG_2(0x48100110)
-#define PAD_MDMSB __REG_2(0x48100114)
-#define PAD_MDLSB __REG_2(0x48100118)
-#define PAD_DMEM __REG_2(0x4810011c)
-#define PAD_SDCLK __REG_2(0x48100120)
-#define PAD_SDCS __REG_2(0x48100124)
-#define PAD_SMEM __REG_2(0x48100128)
-#define PAD_SCLK __REG_2(0x4810012C)
-#define TAI __REG_2(0x48100F00) /* TAI Tavor Address Isolation Register */
+#define MDCNFG 0x48100000 /* SDRAM Configuration Register 0 */
+#define MDREFR 0x48100004 /* SDRAM Refresh Control Register */
+#define FLYCNFG 0x48100020 /* Fly-by DMA DVAL[1:0] polarities */
+#define MDMRS 0x48100040 /* MRS value to be written to SDRAM */
+#define DDR_SCAL 0x48100050 /* Software Delay Line Calibration/Configuration for external DDR memory. */
+#define DDR_HCAL 0x48100060 /* Hardware Delay Line Calibration/Configuration for external DDR memory. */
+#define DDR_WCAL 0x48100068 /* DDR Write Strobe Calibration Register */
+#define DMCIER 0x48100070 /* Dynamic MC Interrupt Enable Register. */
+#define DMCISR 0x48100078 /* Dynamic MC Interrupt Status Register. */
+#define DDR_DLS 0x48100080 /* DDR Delay Line Value Status register for external DDR memory. */
+#define EMPI 0x48100090 /* EMPI Control Register */
+#define RCOMP 0x48100100
+#define PAD_MA 0x48100110
+#define PAD_MDMSB 0x48100114
+#define PAD_MDLSB 0x48100118
+#define PAD_DMEM 0x4810011c
+#define PAD_SDCLK 0x48100120
+#define PAD_SDCS 0x48100124
+#define PAD_SMEM 0x48100128
+#define PAD_SCLK 0x4810012C
+#define TAI 0x48100F00 /* TAI Tavor Address Isolation Register */
/* Some frequently used bits */
#define MDCNFG_DMAP 0x80000000 /* SDRAM 1GB Memory Map Enable */
@@ -2298,19 +2496,19 @@ typedef void (*ExcpHndlr) (void) ;
/* Data Flash Controller Registers */
-#define NDCR __REG(0x43100000) /* Data Flash Control register */
-#define NDTR0CS0 __REG(0x43100004) /* Data Controller Timing Parameter 0 Register for ND_nCS0 */
-/* #define NDTR0CS1 __REG(0x43100008) /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */
-#define NDTR1CS0 __REG(0x4310000C) /* Data Controller Timing Parameter 1 Register for ND_nCS0 */
-/* #define NDTR1CS1 __REG(0x43100010) /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */
-#define NDSR __REG(0x43100014) /* Data Controller Status Register */
-#define NDPCR __REG(0x43100018) /* Data Controller Page Count Register */
-#define NDBDR0 __REG(0x4310001C) /* Data Controller Bad Block Register 0 */
-#define NDBDR1 __REG(0x43100020) /* Data Controller Bad Block Register 1 */
-#define NDDB __REG(0x43100040) /* Data Controller Data Buffer */
-#define NDCB0 __REG(0x43100048) /* Data Controller Command Buffer0 */
-#define NDCB1 __REG(0x4310004C) /* Data Controller Command Buffer1 */
-#define NDCB2 __REG(0x43100050) /* Data Controller Command Buffer2 */
+#define NDCR 0x43100000 /* Data Flash Control register */
+#define NDTR0CS0 0x43100004 /* Data Controller Timing Parameter 0 Register for ND_nCS0 */
+/* #define NDTR0CS1 0x43100008 /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */
+#define NDTR1CS0 0x4310000C /* Data Controller Timing Parameter 1 Register for ND_nCS0 */
+/* #define NDTR1CS1 0x43100010 /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */
+#define NDSR 0x43100014 /* Data Controller Status Register */
+#define NDPCR 0x43100018 /* Data Controller Page Count Register */
+#define NDBDR0 0x4310001C /* Data Controller Bad Block Register 0 */
+#define NDBDR1 0x43100020 /* Data Controller Bad Block Register 1 */
+#define NDDB 0x43100040 /* Data Controller Data Buffer */
+#define NDCB0 0x43100048 /* Data Controller Command Buffer0 */
+#define NDCB1 0x4310004C /* Data Controller Command Buffer1 */
+#define NDCB2 0x43100050 /* Data Controller Command Buffer2 */
#define NDCR_SPARE_EN (0x1<<31)
#define NDCR_ECC_EN (0x1<<30)
@@ -2386,7 +2584,9 @@ typedef void (*ExcpHndlr) (void) ;
#else /* CONFIG_CPU_MONAHANS */
-#define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */
+/* PXA2xx */
+
+#define MEMC_BASE 0x48000000 /* Base of Memory Controller */
#define MDCNFG_OFFSET 0x0
#define MDREFR_OFFSET 0x4
#define MSC0_OFFSET 0x8
@@ -2405,29 +2605,30 @@ typedef void (*ExcpHndlr) (void) ;
#define MCIO1_OFFSET 0x3C
#define MDMRS_OFFSET 0x40
-#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
+#define MDCNFG 0x48000000 /* SDRAM Configuration Register 0 */
#define MDCNFG_DE0 0x00000001
#define MDCNFG_DE1 0x00000002
#define MDCNFG_DE2 0x00010000
#define MDCNFG_DE3 0x00020000
#define MDCNFG_DWID0 0x00000004
-#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
-#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
-#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
-#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */
-#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */
-#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
-#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+#define MDREFR 0x48000004 /* SDRAM Refresh Control Register */
+#define MSC0 0x48000008 /* Static Memory Control Register 0 */
+#define MSC1 0x4800000C /* Static Memory Control Register 1 */
+#define MSC2 0x48000010 /* Static Memory Control Register 2 */
+#define MECR 0x48000014 /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR 0x48000018 /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG 0x4800001C /* Synchronous Static Memory Control Register */
+#define FLYCNFG 0x48000020
+#define SXMRS 0x48000024 /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0 0x48000028 /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1 0x4800002C /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0 0x48000030 /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1 0x48000034 /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0 0x48000038 /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1 0x4800003C /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS 0x48000040 /* MRS value to be written to SDRAM */
+#define BOOT_DEF 0x48000044 /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
#define MDREFR_ALTREFA (1 << 31) /* Exiting Alternate Bus Master Mode Refresh Control */
#define MDREFR_ALTREFB (1 << 30) /* Entering Alternate Bus Master Mode Refresh Control */
@@ -2448,7 +2649,7 @@ typedef void (*ExcpHndlr) (void) ;
#if defined(CONFIG_PXA27X)
-#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
+#define ARB_CNTRL 0x48000048 /* Arbiter Control Register */
#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
@@ -2460,80 +2661,41 @@ typedef void (*ExcpHndlr) (void) ;
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
-#endif /* CONFIG_CPU_MONAHANS */
-
-/* Interrupt Controller */
-
-#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
-#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
-#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
-
-/* General Purpose I/O */
-
-#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */
-#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */
-#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO <127:96> */
-#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-/* Core Clock */
-
-#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
-
-#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */
-#define CKEN22_MEMC (1 << 22) /* Memory Controler */
-#define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */
-#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */
-#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */
-#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */
-#define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */
-#define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */
-#define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */
-#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */
-
-/* Memory controller */
-
-#define MDREFR_K0DB4 (1 << 29) /* SDCLK[0] divide by 4 */
+#endif /* CONFIG_PXA27X */
/* LCD registers */
-#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */
-#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */
-#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */
-#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */
-#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */
-#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */
-#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */
-#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */
-#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */
-#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */
-#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */
-#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */
-#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */
-#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */
-#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */
-#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */
-#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */
-#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */
-#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */
-#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */
-#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */
-#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */
-#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */
-
-#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */
-#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */
-#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */
-#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */
-#define CCR __REG(0x44000090) /* Cursor Control Register */
-
-#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */
-#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */
+#define LCCR4 0x44000010 /* LCD Controller Control Register 4 */
+#define LCCR5 0x44000014 /* LCD Controller Control Register 5 */
+#define FBR0 0x44000020 /* DMA Channel 0 Frame Branch Register */
+#define FBR1 0x44000024 /* DMA Channel 1 Frame Branch Register */
+#define FBR2 0x44000028 /* DMA Channel 2 Frame Branch Register */
+#define FBR3 0x4400002C /* DMA Channel 3 Frame Branch Register */
+#define FBR4 0x44000030 /* DMA Channel 4 Frame Branch Register */
+#define FDADR2 0x44000220 /* DMA Channel 2 Frame Descriptor Address Register */
+#define FSADR2 0x44000224 /* DMA Channel 2 Frame Source Address Register */
+#define FIDR2 0x44000228 /* DMA Channel 2 Frame ID Register */
+#define LDCMD2 0x4400022C /* DMA Channel 2 Command Register */
+#define FDADR3 0x44000230 /* DMA Channel 3 Frame Descriptor Address Register */
+#define FSADR3 0x44000234 /* DMA Channel 3 Frame Source Address Register */
+#define FIDR3 0x44000238 /* DMA Channel 3 Frame ID Register */
+#define LDCMD3 0x4400023C /* DMA Channel 3 Command Register */
+#define FDADR4 0x44000240 /* DMA Channel 4 Frame Descriptor Address Register */
+#define FSADR4 0x44000244 /* DMA Channel 4 Frame Source Address Register */
+#define FIDR4 0x44000248 /* DMA Channel 4 Frame ID Register */
+#define LDCMD4 0x4400024C /* DMA Channel 4 Command Register */
+#define FDADR5 0x44000250 /* DMA Channel 5 Frame Descriptor Address Register */
+#define FSADR5 0x44000254 /* DMA Channel 5 Frame Source Address Register */
+#define FIDR5 0x44000258 /* DMA Channel 5 Frame ID Register */
+#define LDCMD5 0x4400025C /* DMA Channel 5 Command Register */
+
+#define OVL1C1 0x44000050 /* Overlay 1 Control Register 1 */
+#define OVL1C2 0x44000060 /* Overlay 1 Control Register 2 */
+#define OVL2C1 0x44000070 /* Overlay 2 Control Register 1 */
+#define OVL2C2 0x44000080 /* Overlay 2 Control Register 2 */
+#define CCR 0x44000090 /* Cursor Control Register */
+
+#define FBR5 0x44000110 /* DMA Channel 5 Frame Branch Register */
+#define FBR6 0x44000114 /* DMA Channel 6 Frame Branch Register */
#define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */
#define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */
@@ -2572,16 +2734,16 @@ typedef void (*ExcpHndlr) (void) ;
/* Keypad controller */
-#define KPC __REG(0x41500000) /* Keypad Interface Control register */
-#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */
-#define KPREC __REG(0x41500010) /* Keypad Intefcace Rotary Encoder register */
-#define KPMK __REG(0x41500018) /* Keypad Intefcace Matrix Key register */
-#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */
-#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
-#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
-#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
-#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
-#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */
+#define KPC 0x41500000 /* Keypad Interface Control register */
+#define KPDK 0x41500008 /* Keypad Interface Direct Key register */
+#define KPREC 0x41500010 /* Keypad Intefcace Rotary Encoder register */
+#define KPMK 0x41500018 /* Keypad Intefcace Matrix Key register */
+#define KPAS 0x41500020 /* Keypad Interface Automatic Scan register */
+#define KPASMKP0 0x41500028 /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
+#define KPASMKP1 0x41500030 /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
+#define KPASMKP2 0x41500038 /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
+#define KPASMKP3 0x41500040 /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
+#define KPKDI 0x41500048 /* Keypad Interface Key Debounce Interval register */
#define KPC_AS (0x1 << 30) /* Automatic Scan bit */
#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */
@@ -2623,15 +2785,15 @@ typedef void (*ExcpHndlr) (void) ;
#define KPASMKPx_SO (0x1 << 31)
#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
-#define PSLR __REG(0x40F00034)
-#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */
-#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */
-#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */
-#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */
-#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */
-#define OSMR4 __REG(0x40A00080) /* */
-#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
-#define OMCR4 __REG(0x40A000C0) /* */
+#define PSLR 0x40F00034
+#define PSTR 0x40F00038 /* Power Manager Standby Configuration Reg */
+#define PSNR 0x40F0003C /* Power Manager Sense Configuration Reg */
+#define PVCR 0x40F00040 /* Power Manager Voltage Change Control Reg */
+#define PKWR 0x40F00050 /* Power Manager KB Wake-Up Enable Reg */
+#define PKSR 0x40F00054 /* Power Manager KB Level-Detect Status Reg */
+#define OSMR4 0x40A00080 /* */
+#define OSCR4 0x40A00040 /* OS Timer Counter Register */
+#define OMCR4 0x40A000C0 /* */
#endif /* CONFIG_PXA27X */
diff --git a/board/colibri_pxa270/colibri_pxa270.c b/board/colibri_pxa270/colibri_pxa270.c
index 84ec38e..8aa7067 100644
--- a/board/colibri_pxa270/colibri_pxa270.c
+++ b/board/colibri_pxa270/colibri_pxa270.c
@@ -22,6 +22,7 @@
#include <common.h>
#include <asm/arch/hardware.h>
#include <netdev.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -65,28 +66,30 @@ int dram_init (void)
#ifdef CONFIG_CMD_USB
int usb_board_init(void)
{
- UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
+ writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
+ ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
+ UHCHR);
- UHCHR |= UHCHR_FSBIR;
+ writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
while (UHCHR & UHCHR_FSBIR);
- UHCHR &= ~UHCHR_SSE;
- UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
+ writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
+ writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
/* Clear any OTG Pin Hold */
- if (PSSR & PSSR_OTGPH)
- PSSR |= PSSR_OTGPH;
+ if (readl(PSSR) & PSSR_OTGPH)
+ writel(readl(PSSR) | PSSR_OTGPH, PSSR);
- UHCRHDA &= ~(0x200);
- UHCRHDA |= 0x100;
+ writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
+ writel(readl(UHCRHDA) | 0x100, UHCRHDA);
/* Set port power control mask bits, only 3 ports. */
- UHCRHDB |= (0x7<<17);
+ writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
/* enable port 2 */
- UP2OCR |= UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+ writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
+ UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
return 0;
}
@@ -98,14 +101,14 @@ void usb_board_init_fail(void)
void usb_board_stop(void)
{
- UHCHR |= UHCHR_FHR;
+ writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
udelay(11);
- UHCHR &= ~UHCHR_FHR;
+ writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
- UHCCOMS |= 1;
+ writel(readl(UHCCOMS) | 1, UHCCOMS);
udelay(10);
- CKEN &= ~CKEN10_USBHOST;
+ writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
return;
}
diff --git a/board/cradle/cradle.c b/board/cradle/cradle.c
index 21eb655..c4a93f9 100644
--- a/board/cradle/cradle.c
+++ b/board/cradle/cradle.c
@@ -28,6 +28,7 @@
#include <asm/arch/pxa-regs.h>
#include <common.h>
#include <netdev.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -92,8 +93,8 @@ set_led (int led, int color)
int shift = led * 2;
unsigned long mask = 0x3 << shift;
- CRADLE_LED_CLR_REG = mask; /* clear bits */
- CRADLE_LED_SET_REG = (color << shift); /* set bits */
+ writel(mask, GPCR2); /* clear bits */
+ writel((color << shift), GPSR2); /* set bits */
udelay (5000);
}
diff --git a/board/cradle/lowlevel_init.S b/board/cradle/lowlevel_init.S
index 6b5cfb9..39964b6 100644
--- a/board/cradle/lowlevel_init.S
+++ b/board/cradle/lowlevel_init.S
@@ -34,10 +34,10 @@ DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE
.endm
.macro SET_LED val
- ldr r6, =CRADLE_LED_CLR_REG
+ ldr r6, =GPCR2
ldr r7, =0
str r7, [r6]
- ldr r6, =CRADLE_LED_SET_REG
+ ldr r6, =GPSR2
ldr r7, =\val
str r7, [r6]
.endm
diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c
index 0a6c13d..6eed9ad 100644
--- a/board/csb226/csb226.c
+++ b/board/csb226/csb226.c
@@ -26,6 +26,7 @@
#include <common.h>
#include <netdev.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -108,23 +109,23 @@ void csb226_set_led(int led, int state)
switch(led) {
case 0: if (state==1) {
- GPCR0 |= CSB226_USER_LED0;
+ writel(readl(GPCR0) | CSB226_USER_LED0, GPCR0);
} else if (state==0) {
- GPSR0 |= CSB226_USER_LED0;
+ writel(readl(GPSR0) | CSB226_USER_LED0, GPSR0);
}
break;
case 1: if (state==1) {
- GPCR0 |= CSB226_USER_LED1;
+ writel(readl(GPCR0) | CSB226_USER_LED1, GPCR0);
} else if (state==0) {
- GPSR0 |= CSB226_USER_LED1;
+ writel(readl(GPSR0) | CSB226_USER_LED1, GPSR0);
}
break;
case 2: if (state==1) {
- GPCR0 |= CSB226_USER_LED2;
+ writel(readl(GPCR0) | CSB226_USER_LED2, GPCR0);
} else if (state==0) {
- GPSR0 |= CSB226_USER_LED2;
+ writel(readl(GPSR0) | CSB226_USER_LED2, GPSR0);
}
break;
}
diff --git a/board/delta/delta.c b/board/delta/delta.c
index 68c39d2..df23076 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -28,6 +28,7 @@
#include <malloc.h>
#include <command.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -110,7 +111,7 @@ static uchar kbd_command_prefix[] = "key_cmd";
static void get_pressed_keys(uchar *s)
{
unsigned long val;
- val = GPLR3;
+ val = readl(GPLR3);
if(val & (1<<31))
*s++ = KEYBD_KP_DKIN0;
@@ -124,18 +125,18 @@ static void get_pressed_keys(uchar *s)
static void keys_init()
{
- CKENB |= CKENB_7_GPIO;
+ writel(readl(CKENB) | CKENB_7_GPIO, CKENB);
udelay(100);
/* Configure GPIOs */
- GPIO127 = 0xa840; /* KP_DKIN0 */
- GPIO114 = 0xa840; /* KP_DKIN1 */
- GPIO125 = 0xa840; /* KP_DKIN2 */
- GPIO118 = 0xa840; /* KP_DKIN5 */
+ writel(0xa840, GPIO127); /* KP_DKIN0 */
+ writel(0xa840, GPIO114); /* KP_DKIN1 */
+ writel(0xa840, GPIO125); /* KP_DKIN2 */
+ writel(0xa840, GPIO118); /* KP_DKIN5 */
/* Configure GPIOs as inputs */
- GPDR3 &= ~(1<<31 | 1<<18 | 1<<29 | 1<<22);
- GCDR3 = (1<<31 | 1<<18 | 1<<29 | 1<<22);
+ writel(readl(GPDR3) & ~(1<<31 | 1<<18 | 1<<29 | 1<<22), GPDR3);
+ writel((1<<31 | 1<<18 | 1<<29 | 1<<22), GCDR3);
udelay(100);
}
@@ -283,11 +284,11 @@ int dram_init (void)
void i2c_init_board()
{
- CKENB |= (CKENB_4_I2C);
+ writel(readl(CKENB) | (CKENB_4_I2C), CKENB);
/* setup I2C GPIO's */
- GPIO32 = 0x801; /* SCL = Alt. Fkt. 1 */
- GPIO33 = 0x801; /* SDA = Alt. Fkt. 1 */
+ writel(0x801, GPIO32); /* SCL = Alt. Fkt. 1 */
+ writel(0x801, GPIO33); /* SDA = Alt. Fkt. 1 */
}
/* initialize the DA9030 Power Controller */
@@ -295,20 +296,20 @@ static void init_DA9030()
{
uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
- CKENB |= CKENB_7_GPIO;
+ writel(readl(CKENB) | CKENB_7_GPIO, CKENB);
udelay(100);
/* Rising Edge on EXTON to reset DA9030 */
- GPIO17 = 0x8800; /* configure GPIO17, no pullup, -down */
- GPDR0 |= (1<<17); /* GPIO17 is output */
- GSDR0 = (1<<17);
- GPCR0 = (1<<17); /* drive GPIO17 low */
- GPSR0 = (1<<17); /* drive GPIO17 high */
+ writel(0x8800, GPIO17); /* configure GPIO17, no pullup, -down */
+ writel(readl(GPDR0) | (1<<17), GPDR0); /* GPIO17 is output */
+ writel((1<<17), GSDR0);
+ writel((1<<17), GPCR0); /* drive GPIO17 low */
+ writel((1<<17), GPSR0); /* drive GPIO17 high */
#if CONFIG_SYS_DA9030_EXTON_DELAY
udelay((unsigned long) CONFIG_SYS_DA9030_EXTON_DELAY); /* wait for DA9030 */
#endif
- GPCR0 = (1<<17); /* drive GPIO17 low */
+ writel((1<<17), GPCR0); /* drive GPIO17 low */
/* reset the watchdog and go active (0xec) */
val = (SYS_CONTROL_A_HWRES_ENABLE |
diff --git a/board/delta/nand.c b/board/delta/nand.c
index 85a6ba2..119a587 100644
--- a/board/delta/nand.c
+++ b/board/delta/nand.c
@@ -26,6 +26,7 @@
#include <nand.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
#ifdef CONFIG_SYS_DFC_DEBUG1
# define DFC_DEBUG1(fmt, args...) printf(fmt, ##args)
@@ -95,7 +96,7 @@ static void dfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
if(bytes_multi) {
for(i=0; i<bytes_multi; i+=4) {
long_buf = (unsigned long*) &buf[i];
- NDDB = *long_buf;
+ writel(*long_buf, NDDB);
}
}
if(rest) {
@@ -120,7 +121,7 @@ static void dfc_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
if(bytes_multi) {
for(i=0; i<bytes_multi; i+=4) {
long_buf = (unsigned long*) &buf[i];
- *long_buf = NDDB;
+ *long_buf = readl(NDDB);
}
}
@@ -166,8 +167,8 @@ static u_char dfc_read_byte(struct mtd_info *mtd)
unsigned long dummy;
if(bytes_read < 0) {
- read_buf = NDDB;
- dummy = NDDB;
+ read_buf = readl(NDDB);
+ dummy = readl(NDDB);
bytes_read = 0;
}
byte = (unsigned char) (read_buf>>(8 * bytes_read++));
@@ -181,7 +182,7 @@ static u_char dfc_read_byte(struct mtd_info *mtd)
/* calculate delta between OSCR values start and now */
static unsigned long get_delta(unsigned long start)
{
- unsigned long cur = OSCR;
+ unsigned long cur = readl(OSCR);
if(cur < start) /* OSCR overflowed */
return (cur + (start^0xffffffff));
@@ -192,7 +193,7 @@ static unsigned long get_delta(unsigned long start)
/* delay function, this doesn't belong here */
static void wait_us(unsigned long us)
{
- unsigned long start = OSCR;
+ unsigned long start = readl(OSCR);
us = DIV_ROUND_UP(us * OSCR_CLK_FREQ, 1000);
while (get_delta(start) < us) {
@@ -202,14 +203,14 @@ static void wait_us(unsigned long us)
static void dfc_clear_nddb(void)
{
- NDCR &= ~NDCR_ND_RUN;
+ writel(readl(NDCR) & ~NDCR_ND_RUN, NDCR);
wait_us(CONFIG_SYS_NAND_OTHER_TO);
}
/* wait_event with timeout */
static unsigned long dfc_wait_event(unsigned long event)
{
- unsigned long ndsr, timeout, start = OSCR;
+ unsigned long ndsr, timeout, start = readl(OSCR);
if(!event)
return 0xff000000;
@@ -221,9 +222,9 @@ static unsigned long dfc_wait_event(unsigned long event)
* OSCR_CLK_FREQ, 1000);
while(1) {
- ndsr = NDSR;
+ ndsr = readl(NDSR);
if(ndsr & event) {
- NDSR |= event;
+ writel(readl(NDSR) | event, NDSR);
break;
}
if(get_delta(start) > timeout) {
@@ -243,11 +244,11 @@ static void dfc_new_cmd(void)
while(retry++ <= CONFIG_SYS_NAND_SENDCMD_RETRY) {
/* Clear NDSR */
- NDSR = 0xFFF;
+ writel(0xfff, NDSR);
/* set NDCR[NDRUN] */
- if(!(NDCR & NDCR_ND_RUN))
- NDCR |= NDCR_ND_RUN;
+ if (!(readl(NDCR) & NDCR_ND_RUN))
+ writel(readl(NDCR) | NDCR_ND_RUN, NDCR);
status = dfc_wait_event(NDSR_WRCMDREQ);
@@ -357,9 +358,9 @@ static void dfc_cmdfunc(struct mtd_info *mtd, unsigned command,
}
write_cmd:
- NDCB0 = ndcb0;
- NDCB0 = ndcb1;
- NDCB0 = ndcb2;
+ writel(ndcb0, NDCB0);
+ writel(ndcb1, NDCB0);
+ writel(ndcb2, NDCB0);
/* wait_event: */
dfc_wait_event(event);
@@ -372,36 +373,36 @@ static void dfc_gpio_init(void)
DFC_DEBUG2("Setting up DFC GPIO's.\n");
/* no idea what is done here, see zylonite.c */
- GPIO4 = 0x1;
-
- DF_ALE_WE1 = 0x00000001;
- DF_ALE_WE2 = 0x00000001;
- DF_nCS0 = 0x00000001;
- DF_nCS1 = 0x00000001;
- DF_nWE = 0x00000001;
- DF_nRE = 0x00000001;
- DF_IO0 = 0x00000001;
- DF_IO8 = 0x00000001;
- DF_IO1 = 0x00000001;
- DF_IO9 = 0x00000001;
- DF_IO2 = 0x00000001;
- DF_IO10 = 0x00000001;
- DF_IO3 = 0x00000001;
- DF_IO11 = 0x00000001;
- DF_IO4 = 0x00000001;
- DF_IO12 = 0x00000001;
- DF_IO5 = 0x00000001;
- DF_IO13 = 0x00000001;
- DF_IO6 = 0x00000001;
- DF_IO14 = 0x00000001;
- DF_IO7 = 0x00000001;
- DF_IO15 = 0x00000001;
-
- DF_nWE = 0x1901;
- DF_nRE = 0x1901;
- DF_CLE_NOE = 0x1900;
- DF_ALE_WE1 = 0x1901;
- DF_INT_RnB = 0x1900;
+ writel(0x1, GPIO4);
+
+ writel(0x00000001, DF_ALE_nWE1);
+ writel(0x00000001, DF_ALE_nWE2);
+ writel(0x00000001, DF_nCS0);
+ writel(0x00000001, DF_nCS1);
+ writel(0x00000001, DF_nWE);
+ writel(0x00000001, DF_nRE);
+ writel(0x00000001, DF_IO0);
+ writel(0x00000001, DF_IO8);
+ writel(0x00000001, DF_IO1);
+ writel(0x00000001, DF_IO9);
+ writel(0x00000001, DF_IO2);
+ writel(0x00000001, DF_IO10);
+ writel(0x00000001, DF_IO3);
+ writel(0x00000001, DF_IO11);
+ writel(0x00000001, DF_IO4);
+ writel(0x00000001, DF_IO12);
+ writel(0x00000001, DF_IO5);
+ writel(0x00000001, DF_IO13);
+ writel(0x00000001, DF_IO6);
+ writel(0x00000001, DF_IO14);
+ writel(0x00000001, DF_IO7);
+ writel(0x00000001, DF_IO15);
+
+ writel(0x1901, DF_nWE);
+ writel(0x1901, DF_nRE);
+ writel(0x1900, DF_CLE_nOE);
+ writel(0x1901, DF_ALE_nWE1);
+ writel(0x1900, DF_INT_RnB);
}
/*
@@ -430,7 +431,7 @@ int board_nand_init(struct nand_chip *nand)
dfc_gpio_init();
/* turn on the NAND Controller Clock (104 MHz @ D0) */
- CKENA |= (CKENA_4_NAND | CKENA_9_SMC);
+ writel(readl(CKENA) | (CKENA_4_NAND | CKENA_9_SMC), CKENA);
#undef CONFIG_SYS_TIMING_TIGHT
#ifndef CONFIG_SYS_TIMING_TIGHT
@@ -485,17 +486,19 @@ int board_nand_init(struct nand_chip *nand)
tRP_high = 0;
}
- NDTR0CS0 = (tCH << 19) |
+ writel((tCH << 19) |
(tCS << 16) |
(tWH << 11) |
(tWP << 8) |
(tRP_high << 6) |
(tRH << 3) |
- (tRP << 0);
+ (tRP << 0),
+ NDTR0CS0);
- NDTR1CS0 = (tR << 16) |
+ writel((tR << 16) |
(tWHR << 4) |
- (tAR << 0);
+ (tAR << 0),
+ NDTR1CS0);
/* If it doesn't work (unlikely) think about:
* - ecc enable
@@ -512,7 +515,7 @@ int board_nand_init(struct nand_chip *nand)
*/
/* NDCR_NCSX | /\* Chip select busy don't care *\/ */
- NDCR = (NDCR_SPARE_EN | /* use the spare area */
+ writel(NDCR_SPARE_EN | /* use the spare area */
NDCR_DWIDTH_C | /* 16bit DFC data bus width */
NDCR_DWIDTH_M | /* 16 bit Flash device data bus width */
(2 << 16) | /* read id count = 7 ???? mk at tbd */
@@ -528,7 +531,8 @@ int board_nand_init(struct nand_chip *nand)
NDCR_SBERRM | /* single bit error ir masked */
NDCR_WRDREQM | /* write data request ir masked */
NDCR_RDDREQM | /* read data request ir masked */
- NDCR_WRCMDREQM); /* write command request ir masked */
+ NDCR_WRCMDREQM, /* write command request ir masked */
+ NDCR);
/* wait 10 us due to cmd buffer clear reset */
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
index 3412f10..2c51125 100644
--- a/board/innokom/innokom.c
+++ b/board/innokom/innokom.c
@@ -27,6 +27,7 @@
#include <netdev.h>
#include <asm/arch/pxa-regs.h>
#include <asm/mach-types.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -48,20 +49,21 @@ int i2c_init_board(void)
/* disable I2C controller first, otherwhise it thinks we want to */
/* talk to the slave port... */
- icr = ICR; ICR &= ~(ICR_SCLE | ICR_IUE);
+ icr = readl(ICR);
+ writel(readl(ICR) & ~(ICR_SCLE | ICR_IUE), ICR);
/* set gpio pin low _before_ we change direction to output */
- GPCR(70) = GPIO_bit(70);
+ writel(GPIO_bit(70), GPCR(70));
/* now toggle between output=low and high-impedance */
for (i = 0; i < 20; i++) {
- GPDR(70) |= GPIO_bit(70); /* output */
+ writel(readl(GPDR(70)) | GPIO_bit(70), GPDR(70)); /* output */
udelay(10);
- GPDR(70) &= ~GPIO_bit(70); /* input */
+ writel(readl(GPDR(70)) & ~GPIO_bit(70), GPDR(70)); /* input */
udelay(10);
}
- ICR = icr;
+ writel(icr, ICR);
return 0;
}
@@ -76,7 +78,7 @@ int misc_init_r(void)
char *str;
/* determine if the software update key is pressed during startup */
- if (GPLR0 & 0x00000800) {
+ if (readl(GPLR0) & 0x00000800) {
printf("using bootcmd_normal (sw-update button not pressed)\n");
str = getenv("bootcmd_normal");
} else {
diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c
index a54a95d..4ab8bd4 100644
--- a/board/pxa255_idp/pxa_idp.c
+++ b/board/pxa255_idp/pxa_idp.c
@@ -33,6 +33,7 @@
#include <common.h>
#include <netdev.h>
#include <command.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -56,14 +57,14 @@ int board_init (void)
/* set PWM for LCD */
/* a value that works is 60Hz, 77% duty cycle */
- CKEN |= CKEN0_PWM0;
- PWM_CTRL0 = 0x3f;
- PWM_PERVAL0 = 0x3ff;
- PWM_PWDUTY0 = 792;
+ writel(readl(CKEN) | CKEN0_PWM0, CKEN);
+ writel(0x3f, PWM_CTRL0);
+ writel(0x3ff, PWM_PERVAL0);
+ writel(792, PWM_PWDUTY0);
/* clear reset to AC97 codec */
- CKEN |= CKEN2_AC97;
- GCR = GCR_COLD_RST;
+ writel(readl(CKEN) | CKEN2_AC97, CKEN);
+ writel(GCR_COLD_RST, GCR);
/* enable LCD backlight */
/* *(volatile unsigned int *)(PXA_CS5_PHYS + 0x03C00030) = 0x7; */
@@ -102,11 +103,11 @@ int dram_init (void)
void delay_c(void)
{
/* reset OSCR to 0 */
- OSCR = 0;
- while(OSCR > 0x10000)
+ writel(0, OSCR);
+ while (readl(OSCR) > 0x10000)
;
- while(OSCR < 0xd4000)
+ while (readl(OSCR) < 0xd4000)
;
}
@@ -114,12 +115,12 @@ void blink_c(void)
{
int led_bit = (1<<10);
- GPDR0 = led_bit;
- GPCR0 = led_bit;
+ writel(led_bit, GPDR0);
+ writel(led_bit, GPCR0);
delay_c();
- GPSR0 = led_bit;
+ writel(led_bit, GPSR0);
delay_c();
- GPCR0 = led_bit;
+ writel(led_bit, GPCR0);
}
int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c
index 8c11456..7fac73d 100644
--- a/board/trizepsiv/conxs.c
+++ b/board/trizepsiv/conxs.c
@@ -34,6 +34,7 @@
#include <common.h>
#include <asm/arch/pxa-regs.h>
#include <netdev.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -57,25 +58,27 @@ extern struct serial_device serial_stuart_device;
int usb_board_init(void)
{
- UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
+ writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
+ ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
+ UHCHR);
- UHCHR |= UHCHR_FSBIR;
+ writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
- while (UHCHR & UHCHR_FSBIR);
+ while (readl(UHCHR) & UHCHR_FSBIR)
+ ;
- UHCHR &= ~UHCHR_SSE;
- UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
+ writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
+ writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
/* Clear any OTG Pin Hold */
- if (PSSR & PSSR_OTGPH)
- PSSR |= PSSR_OTGPH;
+ if (readl(PSSR) & PSSR_OTGPH)
+ writel(readl(PSSR) | PSSR_OTGPH, PSSR);
- UHCRHDA &= ~(RH_A_NPS);
- UHCRHDA |= RH_A_PSM;
+ writel(readl(UHCRHDA) & ~(RH_A_NPS), UHCRHDA);
+ writel(readl(UHCRHDA) | RH_A_PSM, UHCRHDA);
/* Set port power control mask bits, only 3 ports. */
- UHCRHDB |= (0x7<<17);
+ writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
return 0;
}
@@ -87,14 +90,14 @@ void usb_board_init_fail(void)
void usb_board_stop(void)
{
- UHCHR |= UHCHR_FHR;
+ writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
udelay(11);
- UHCHR &= ~UHCHR_FHR;
+ writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
- UHCCOMS |= 1;
+ writel(readl(UHCCOMS) | 1, UHCCOMS);
udelay(10);
- CKEN &= ~CKEN10_USBHOST;
+ writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
return;
}
diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c
index 18e47e2..f792298 100644
--- a/board/vpac270/vpac270.c
+++ b/board/vpac270/vpac270.c
@@ -31,6 +31,8 @@
#include <common.h>
#include <asm/arch/hardware.h>
#include <netdev.h>
+#include <serial.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -75,28 +77,31 @@ int dram_init (void)
int usb_board_init(void)
{
- UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
+ writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+ ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
+ UHCHR);
- UHCHR |= UHCHR_FSBIR;
+ writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
- while (UHCHR & UHCHR_FSBIR);
+ while (readl(UHCHR) & UHCHR_FSBIR)
+ ;
- UHCHR &= ~UHCHR_SSE;
- UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
+ writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
+ writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
/* Clear any OTG Pin Hold */
- if (PSSR & PSSR_OTGPH)
- PSSR |= PSSR_OTGPH;
+ if (readl(PSSR) & PSSR_OTGPH)
+ writel(readl(PSSR) | PSSR_OTGPH, PSSR);
- UHCRHDA &= ~(0x200);
- UHCRHDA |= 0x100;
+ writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
+ writel(readl(UHCRHDA) | 0x100, UHCRHDA);
/* Set port power control mask bits, only 3 ports. */
- UHCRHDB |= (0x7<<17);
+ writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
/* enable port 2 */
- UP2OCR |= UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+ writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
+ UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
return 0;
}
@@ -108,14 +113,14 @@ void usb_board_init_fail(void)
void usb_board_stop(void)
{
- UHCHR |= UHCHR_FHR;
+ writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
udelay(11);
- UHCHR &= ~UHCHR_FHR;
+ writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
- UHCCOMS |= 1;
+ writel(readl(UHCCOMS) | 1, UHCCOMS);
udelay(10);
- CKEN &= ~CKEN10_USBHOST;
+ writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
return;
}
diff --git a/board/wepep250/wepep250.c b/board/wepep250/wepep250.c
index fe4b6a9..6e41ea6 100644
--- a/board/wepep250/wepep250.c
+++ b/board/wepep250/wepep250.c
@@ -22,6 +22,7 @@
#include <common.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -33,13 +34,13 @@ int board_init (void)
* Setup GPIO stuff to get serial working
*/
#if defined( CONFIG_FFUART )
- GPDR1 = 0x80;
- GAFR1_L = 0x8010;
+ writel(0x80, GPDR1);
+ writel(0x8010, GAFR1_L);
#elif defined( CONFIG_BTUART )
- GPDR1 = 0x800;
- GAFR1_L = 0x900000;
+ writel(0x800, GPDR1);
+ writel(0x900000, GAFR1_L);
#endif
- PSSR = 0x20;
+ writel(0x20, PSSR);
return 0;
}
diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c
index 14d1d76..f7edc4c 100644
--- a/board/zipitz2/zipitz2.c
+++ b/board/zipitz2/zipitz2.c
@@ -28,6 +28,7 @@
#include <serial.h>
#include <asm/arch/hardware.h>
#include <spi.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -129,24 +130,24 @@ void zipitz2_spi_sda(int set)
{
/* GPIO 13 */
if (set)
- GPSR0 = (1 << 13);
+ writel((1 << 13), GPSR0);
else
- GPCR0 = (1 << 13);
+ writel((1 << 13), GPCR0);
}
void zipitz2_spi_scl(int set)
{
/* GPIO 22 */
if (set)
- GPCR0 = (1 << 22);
+ writel((1 << 22), GPCR0);
else
- GPSR0 = (1 << 22);
+ writel((1 << 22), GPSR0);
}
unsigned char zipitz2_spi_read(void)
{
/* GPIO 40 */
- return !!(GPLR1 & (1 << 8));
+ return !!(readl(GPLR1) & (1 << 8));
}
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
@@ -158,13 +159,13 @@ int spi_cs_is_valid(unsigned int bus, unsigned int cs)
void spi_cs_activate(struct spi_slave *slave)
{
/* GPIO 88 low */
- GPCR2 = (1 << 24);
+ writel((1 << 24), GPCR2);
}
void spi_cs_deactivate(struct spi_slave *slave)
{
/* GPIO 88 high */
- GPSR2 = (1 << 24);
+ writel((1 << 24), GPSR2);
}
@@ -176,20 +177,20 @@ void lcd_start(void)
unsigned char dummy[3] = { 0, 0, 0 };
/* PWM2 AF */
- GAFR0_L |= 0x00800000;
+ writel(readl(GAFR0_L) | 0x00800000, GAFR0_L);
/* Enable clock to all PWM */
- CKEN |= 0x3;
+ writel(readl(CKEN) | 0x3, CKEN);
/* Configure PWM2 */
- PWM_CTRL2 = 0x4f;
- PWM_PWDUTY2 = 0x2ff;
- PWM_PERVAL2 = 792;
+ writel(0x4f, PWM_CTRL2);
+ writel(0x2ff, PWM_PWDUTY2);
+ writel(792, PWM_PERVAL2);
/* Toggle the reset pin to reset the LCD */
- GPSR0 = (1 << 19);
+ writel((1 << 19), GPSR0);
udelay(100000);
- GPCR0 = (1 << 19);
+ writel((1 << 19), GPCR0);
udelay(20000);
- GPSR0 = (1 << 19);
+ writel((1 << 19), GPSR0);
udelay(20000);
/* Program the LCD init sequence */
@@ -208,6 +209,6 @@ void lcd_start(void)
udelay(lcd_data[i].mdelay * 1000);
}
- GPSR0 = (1 << 11);
+ writel((1 << 11), GPSR0);
}
#endif
diff --git a/board/zylonite/nand.c b/board/zylonite/nand.c
index 7cad1ac..71d18a6 100644
--- a/board/zylonite/nand.c
+++ b/board/zylonite/nand.c
@@ -21,6 +21,7 @@
*/
#include <common.h>
+#include <asm/io.h>
#if defined(CONFIG_CMD_NAND)
@@ -95,7 +96,7 @@ static void dfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
if(bytes_multi) {
for(i=0; i<bytes_multi; i+=4) {
long_buf = (unsigned long*) &buf[i];
- NDDB = *long_buf;
+ writel(*long_buf, NDDB);
}
}
if(rest) {
@@ -125,7 +126,7 @@ static void dfc_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
if(bytes_multi) {
for(i=0; i<bytes_multi; i+=4) {
long_buf = (unsigned long*) &buf[i];
- *long_buf = NDDB;
+ *long_buf = readl(NDDB);
}
}
@@ -171,8 +172,8 @@ static u_char dfc_read_byte(struct mtd_info *mtd)
unsigned long dummy;
if(bytes_read < 0) {
- read_buf = NDDB;
- dummy = NDDB;
+ read_buf = readl(NDDB);
+ dummy = readl(NDDB);
bytes_read = 0;
}
byte = (unsigned char) (read_buf>>(8 * bytes_read++));
@@ -186,7 +187,7 @@ static u_char dfc_read_byte(struct mtd_info *mtd)
/* calculate delta between OSCR values start and now */
static unsigned long get_delta(unsigned long start)
{
- unsigned long cur = OSCR;
+ unsigned long cur = readl(OSCR);
if(cur < start) /* OSCR overflowed */
return (cur + (start^0xffffffff));
@@ -197,7 +198,7 @@ static unsigned long get_delta(unsigned long start)
/* delay function, this doesn't belong here */
static void wait_us(unsigned long us)
{
- unsigned long start = OSCR;
+ unsigned long start = readl(OSCR);
us = DIV_ROUND_UP(us * OSCR_CLK_FREQ, 1000);
while (get_delta(start) < us) {
@@ -207,14 +208,14 @@ static void wait_us(unsigned long us)
static void dfc_clear_nddb(void)
{
- NDCR &= ~NDCR_ND_RUN;
+ writel(readl(NDCR) & ~NDCR_ND_RUN, NDCR);
wait_us(CONFIG_SYS_NAND_OTHER_TO);
}
/* wait_event with timeout */
static unsigned long dfc_wait_event(unsigned long event)
{
- unsigned long ndsr, timeout, start = OSCR;
+ unsigned long ndsr, timeout, start = readl(OSCR);
if(!event)
return 0xff000000;
@@ -226,9 +227,9 @@ static unsigned long dfc_wait_event(unsigned long event)
* OSCR_CLK_FREQ, 1000);
while(1) {
- ndsr = NDSR;
+ ndsr = readl(NDSR);
if(ndsr & event) {
- NDSR |= event;
+ writel(readl(NDSR) | event, NDSR);
break;
}
if(get_delta(start) > timeout) {
@@ -248,11 +249,11 @@ static void dfc_new_cmd(void)
while(retry++ <= CONFIG_SYS_NAND_SENDCMD_RETRY) {
/* Clear NDSR */
- NDSR = 0xFFF;
+ writel(0xFFF, NDSR);
/* set NDCR[NDRUN] */
- if(!(NDCR & NDCR_ND_RUN))
- NDCR |= NDCR_ND_RUN;
+ if (!(readl(NDCR) & NDCR_ND_RUN))
+ writel(readl(NDCR) | NDCR_ND_RUN, NDCR);
status = dfc_wait_event(NDSR_WRCMDREQ);
@@ -362,9 +363,9 @@ static void dfc_cmdfunc(struct mtd_info *mtd, unsigned command,
}
write_cmd:
- NDCB0 = ndcb0;
- NDCB0 = ndcb1;
- NDCB0 = ndcb2;
+ writel(ndcb0, NDCB0);
+ writel(ndcb1, NDCB0);
+ writel(ndcb2, NDCB0);
/* wait_event: */
dfc_wait_event(event);
@@ -377,36 +378,36 @@ static void dfc_gpio_init(void)
DFC_DEBUG2("Setting up DFC GPIO's.\n");
/* no idea what is done here, see zylonite.c */
- GPIO4 = 0x1;
-
- DF_ALE_WE1 = 0x00000001;
- DF_ALE_WE2 = 0x00000001;
- DF_nCS0 = 0x00000001;
- DF_nCS1 = 0x00000001;
- DF_nWE = 0x00000001;
- DF_nRE = 0x00000001;
- DF_IO0 = 0x00000001;
- DF_IO8 = 0x00000001;
- DF_IO1 = 0x00000001;
- DF_IO9 = 0x00000001;
- DF_IO2 = 0x00000001;
- DF_IO10 = 0x00000001;
- DF_IO3 = 0x00000001;
- DF_IO11 = 0x00000001;
- DF_IO4 = 0x00000001;
- DF_IO12 = 0x00000001;
- DF_IO5 = 0x00000001;
- DF_IO13 = 0x00000001;
- DF_IO6 = 0x00000001;
- DF_IO14 = 0x00000001;
- DF_IO7 = 0x00000001;
- DF_IO15 = 0x00000001;
-
- DF_nWE = 0x1901;
- DF_nRE = 0x1901;
- DF_CLE_NOE = 0x1900;
- DF_ALE_WE1 = 0x1901;
- DF_INT_RnB = 0x1900;
+ writel(0x1, GPIO4);
+
+ writel(0x00000001, DF_ALE_nWE1);
+ writel(0x00000001, DF_ALE_nWE2);
+ writel(0x00000001, DF_nCS0);
+ writel(0x00000001, DF_nCS1);
+ writel(0x00000001, DF_nWE);
+ writel(0x00000001, DF_nRE);
+ writel(0x00000001, DF_IO0);
+ writel(0x00000001, DF_IO8);
+ writel(0x00000001, DF_IO1);
+ writel(0x00000001, DF_IO9);
+ writel(0x00000001, DF_IO2);
+ writel(0x00000001, DF_IO10);
+ writel(0x00000001, DF_IO3);
+ writel(0x00000001, DF_IO11);
+ writel(0x00000001, DF_IO4);
+ writel(0x00000001, DF_IO12);
+ writel(0x00000001, DF_IO5);
+ writel(0x00000001, DF_IO13);
+ writel(0x00000001, DF_IO6);
+ writel(0x00000001, DF_IO14);
+ writel(0x00000001, DF_IO7);
+ writel(0x00000001, DF_IO15);
+
+ writel(0x1901, DF_nWE);
+ writel(0x1901, DF_nRE);
+ writel(0x1900, DF_CLE_nOE);
+ writel(0x1901, DF_ALE_nWE1);
+ writel(0x1900, DF_INT_RnB);
}
/*
@@ -435,7 +436,7 @@ int board_nand_init(struct nand_chip *nand)
dfc_gpio_init();
/* turn on the NAND Controller Clock (104 MHz @ D0) */
- CKENA |= (CKENA_4_NAND | CKENA_9_SMC);
+ writel(readl(CKENA) | (CKENA_4_NAND | CKENA_9_SMC), CKENA);
#undef CONFIG_SYS_TIMING_TIGHT
#ifndef CONFIG_SYS_TIMING_TIGHT
@@ -490,17 +491,19 @@ int board_nand_init(struct nand_chip *nand)
tRP_high = 0;
}
- NDTR0CS0 = (tCH << 19) |
+ writel((tCH << 19) |
(tCS << 16) |
(tWH << 11) |
(tWP << 8) |
(tRP_high << 6) |
(tRH << 3) |
- (tRP << 0);
+ (tRP << 0),
+ NDTR0CS0);
- NDTR1CS0 = (tR << 16) |
+ writel((tR << 16) |
(tWHR << 4) |
- (tAR << 0);
+ (tAR << 0),
+ NDTR1CS0);
/* If it doesn't work (unlikely) think about:
* - ecc enable
@@ -517,7 +520,7 @@ int board_nand_init(struct nand_chip *nand)
*/
/* NDCR_NCSX | /\* Chip select busy don't care *\/ */
- NDCR = (NDCR_SPARE_EN | /* use the spare area */
+ writel(NDCR_SPARE_EN | /* use the spare area */
NDCR_DWIDTH_C | /* 16bit DFC data bus width */
NDCR_DWIDTH_M | /* 16 bit Flash device data bus width */
(2 << 16) | /* read id count = 7 ???? mk at tbd */
@@ -533,7 +536,8 @@ int board_nand_init(struct nand_chip *nand)
NDCR_SBERRM | /* single bit error ir masked */
NDCR_WRDREQM | /* write data request ir masked */
NDCR_RDDREQM | /* read data request ir masked */
- NDCR_WRCMDREQM); /* write command request ir masked */
+ NDCR_WRCMDREQM, /* write command request ir masked */
+ NDCR);
/* wait 10 us due to cmd buffer clear reset */
diff --git a/drivers/mmc/pxa_mmc.c b/drivers/mmc/pxa_mmc.c
index 8776903..48e21ef 100644
--- a/drivers/mmc/pxa_mmc.c
+++ b/drivers/mmc/pxa_mmc.c
@@ -27,6 +27,7 @@
#include <asm/errno.h>
#include <asm/arch/hardware.h>
#include <part.h>
+#include <asm/io.h>
#include "pxa_mmc.h"
@@ -59,18 +60,20 @@ mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat)
debug("mmc_cmd %u 0x%04x 0x%04x 0x%04x\n", cmd, argh, argl,
cmdat | wide);
- MMC_STRPCL = MMC_STRPCL_STOP_CLK;
- MMC_I_MASK = ~MMC_I_MASK_CLK_IS_OFF;
- while (!(MMC_I_REG & MMC_I_REG_CLK_IS_OFF)) ;
- MMC_CMD = cmd;
- MMC_ARGH = argh;
- MMC_ARGL = argl;
- MMC_CMDAT = cmdat | wide;
- MMC_I_MASK = ~MMC_I_MASK_END_CMD_RES;
- MMC_STRPCL = MMC_STRPCL_START_CLK;
- while (!(MMC_I_REG & MMC_I_REG_END_CMD_RES)) ;
-
- status = MMC_STAT;
+ writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
+ writel(~MMC_I_MASK_CLK_IS_OFF, MMC_I_MASK);
+ while (!(readl(MMC_I_REG) & MMC_I_REG_CLK_IS_OFF))
+ ;
+ writel(cmd, MMC_CMD);
+ writel(argh, MMC_ARGH);
+ writel(argl, MMC_ARGL);
+ writel(cmdat | wide, MMC_CMDAT);
+ writel(~MMC_I_MASK_END_CMD_RES, MMC_I_MASK);
+ writel(MMC_STRPCL_START_CLK, MMC_STRPCL);
+ while (!(readl(MMC_I_REG) & MMC_I_REG_END_CMD_RES))
+ ;
+
+ status = readl(MMC_STAT);
debug("MMC status 0x%08x\n", status);
if (status & MMC_STAT_TIME_OUT_RESPONSE) {
return 0;
@@ -80,10 +83,10 @@ mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat)
* Did I mention this is Sick. We always need to
* discard the upper 8 bits of the first 16-bit word.
*/
- a = (MMC_RES & 0xffff);
+ a = (readl(MMC_RES) & 0xffff);
for (i = 0; i < 4; i++) {
- b = (MMC_RES & 0xffff);
- c = (MMC_RES & 0xffff);
+ b = (readl(MMC_RES) & 0xffff);
+ c = (readl(MMC_RES) & 0xffff);
resp[i] = (a << 24) | (b << 8) | (c >> 8);
a = c;
debug("MMC resp[%d] = %#08x\n", i, resp[i]);
@@ -115,37 +118,38 @@ mmc_block_read(uchar * dst, ulong src, ulong len)
/* send read command */
argh = src >> 16;
argl = src & 0xffff;
- MMC_STRPCL = MMC_STRPCL_STOP_CLK;
- MMC_RDTO = 0xffff;
- MMC_NOB = 1;
- MMC_BLKLEN = len;
+ writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
+ writel(0xffff, MMC_RDTO);
+ writel(1, MMC_NOB);
+ writel(len, MMC_BLKLEN);
mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK, argh, argl,
MMC_CMDAT_R1 | MMC_CMDAT_READ | MMC_CMDAT_BLOCK |
MMC_CMDAT_DATA_EN);
- MMC_I_MASK = ~MMC_I_MASK_RXFIFO_RD_REQ;
+ writel(~MMC_I_MASK_RXFIFO_RD_REQ, MMC_I_MASK);
while (len) {
- if (MMC_I_REG & MMC_I_REG_RXFIFO_RD_REQ) {
+ if (readl(MMC_I_REG) & MMC_I_REG_RXFIFO_RD_REQ) {
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
int i;
for (i = min(len, 32); i; i--) {
- *dst++ = *((volatile uchar *)&MMC_RXFIFO);
+ *dst++ = readb(MMC_RXFIFO);
len--;
}
#else
- *dst++ = MMC_RXFIFO;
+ *dst++ = readb(MMC_RXFIFO);
len--;
#endif
}
- status = MMC_STAT;
+ status = readl(MMC_STAT);
if (status & MMC_STAT_ERRORS) {
printf("MMC_STAT error %lx\n", status);
return -1;
}
}
- MMC_I_MASK = ~MMC_I_MASK_DATA_TRAN_DONE;
- while (!(MMC_I_REG & MMC_I_REG_DATA_TRAN_DONE)) ;
- status = MMC_STAT;
+ writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK);
+ while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE))
+ ;
+ status = readl(MMC_STAT);
if (status & MMC_STAT_ERRORS) {
printf("MMC_STAT error %lx\n", status);
return -1;
@@ -176,37 +180,39 @@ mmc_block_write(ulong dst, uchar * src, int len)
/* send write command */
argh = dst >> 16;
argl = dst & 0xffff;
- MMC_STRPCL = MMC_STRPCL_STOP_CLK;
- MMC_NOB = 1;
- MMC_BLKLEN = len;
+ writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
+ writel(1, MMC_NOB);
+ writel(len, MMC_BLKLEN);
mmc_cmd(MMC_CMD_WRITE_SINGLE_BLOCK, argh, argl,
MMC_CMDAT_R1 | MMC_CMDAT_WRITE | MMC_CMDAT_BLOCK |
MMC_CMDAT_DATA_EN);
- MMC_I_MASK = ~MMC_I_MASK_TXFIFO_WR_REQ;
+ writel(~MMC_I_MASK_TXFIFO_WR_REQ, MMC_I_MASK);
while (len) {
- if (MMC_I_REG & MMC_I_REG_TXFIFO_WR_REQ) {
+ if (readl(MMC_I_REG) & MMC_I_REG_TXFIFO_WR_REQ) {
int i, bytes = min(32, len);
for (i = 0; i < bytes; i++) {
- MMC_TXFIFO = *src++;
+ writel(*src++, MMC_TXFIFO);
}
if (bytes < 32) {
- MMC_PRTBUF = MMC_PRTBUF_BUF_PART_FULL;
+ writel(MMC_PRTBUF_BUF_PART_FULL, MMC_PRTBUF);
}
len -= bytes;
}
- status = MMC_STAT;
+ status = readl(MMC_STAT);
if (status & MMC_STAT_ERRORS) {
printf("MMC_STAT error %lx\n", status);
return -1;
}
}
- MMC_I_MASK = ~MMC_I_MASK_DATA_TRAN_DONE;
- while (!(MMC_I_REG & MMC_I_REG_DATA_TRAN_DONE)) ;
- MMC_I_MASK = ~MMC_I_MASK_PRG_DONE;
- while (!(MMC_I_REG & MMC_I_REG_PRG_DONE)) ;
- status = MMC_STAT;
+ writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK);
+ while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE))
+ ;
+ writel(~MMC_I_MASK_PRG_DONE, MMC_I_MASK);
+ while (!(readl(MMC_I_REG) & MMC_I_REG_PRG_DONE))
+ ;
+ status = readl(MMC_STAT);
if (status & MMC_STAT_ERRORS) {
printf("MMC_STAT error %lx\n", status);
return -1;
@@ -559,13 +565,13 @@ mmc_legacy_init(int verbose)
set_GPIO_mode(GPIO8_MMCCS0_MD);
#endif
#ifdef CONFIG_CPU_MONAHANS /* pxa3xx */
- CKENA |= CKENA_12_MMC0 | CKENA_13_MMC1;
+ writel(readl(CKENA) | CKENA_12_MMC0 | CKENA_13_MMC1, CKENA);
#else /* pxa2xx */
- CKEN |= CKEN12_MMC; /* enable MMC unit clock */
+ writel(readl(CKEN) | CKEN12_MMC, CKEN); /* enable MMC unit clock */
#endif
- MMC_CLKRT = MMC_CLKRT_0_3125MHZ;
- MMC_RESTO = MMC_RES_TO_MAX;
- MMC_SPI = MMC_SPI_DISABLE;
+ writel(MMC_CLKRT_0_3125MHZ, MMC_CLKRT);
+ writel(MMC_RES_TO_MAX, MMC_RESTO);
+ writel(MMC_SPI_DISABLE, MMC_SPI);
/* reset */
mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0);
@@ -624,7 +630,7 @@ mmc_legacy_init(int verbose)
mmc_decode_cid(cid_resp);
}
- MMC_CLKRT = 0; /* 20 MHz */
+ writel(0, MMC_CLKRT); /* 20 MHz */
resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca, 0, MMC_CMDAT_R1);
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
diff --git a/drivers/serial/serial_pxa.c b/drivers/serial/serial_pxa.c
index b74e439..e457980 100644
--- a/drivers/serial/serial_pxa.c
+++ b/drivers/serial/serial_pxa.c
@@ -32,6 +32,7 @@
#include <watchdog.h>
#include <serial.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -73,60 +74,60 @@ void pxa_setbrg_dev (unsigned int uart_index)
switch (uart_index) {
case FFUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS
- CKENA |= CKENA_22_FFUART;
+ writel(readl(CKENA) | CKENA_22_FFUART, CKENA);
#else
- CKEN |= CKEN6_FFUART;
+ writel(readl(CKEN) | CKEN6_FFUART, CKEN);
#endif /* CONFIG_CPU_MONAHANS */
- FFIER = 0; /* Disable for now */
- FFFCR = 0; /* No fifos enabled */
+ writel(0, FFIER); /* Disable for now */
+ writel(0, FFFCR); /* No fifos enabled */
/* set baud rate */
- FFLCR = LCR_WLS0 | LCR_WLS1 | LCR_DLAB;
- FFDLL = quot & 0xff;
- FFDLH = quot >> 8;
- FFLCR = LCR_WLS0 | LCR_WLS1;
+ writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, FFLCR);
+ writel(quot & 0xff, FFDLL);
+ writel(quot >> 8, FFDLH);
+ writel(LCR_WLS0 | LCR_WLS1, FFLCR);
- FFIER = IER_UUE; /* Enable FFUART */
+ writel(IER_UUE, FFIER); /* Enable FFUART */
break;
case BTUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS
- CKENA |= CKENA_21_BTUART;
+ writel(readl(CKENA) | CKENA_21_BTUART, CKENA);
#else
- CKEN |= CKEN7_BTUART;
+ writel(readl(CKEN) | CKEN7_BTUART, CKEN);
#endif /* CONFIG_CPU_MONAHANS */
- BTIER = 0;
- BTFCR = 0;
+ writel(0, BTIER);
+ writel(0, BTFCR);
/* set baud rate */
- BTLCR = LCR_DLAB;
- BTDLL = quot & 0xff;
- BTDLH = quot >> 8;
- BTLCR = LCR_WLS0 | LCR_WLS1;
+ writel(LCR_DLAB, BTLCR);
+ writel(quot & 0xff, BTDLL);
+ writel(quot >> 8, BTDLH);
+ writel(LCR_WLS0 | LCR_WLS1, BTLCR);
- BTIER = IER_UUE; /* Enable BFUART */
+ writel(IER_UUE, BTIER); /* Enable BFUART */
break;
case STUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS
- CKENA |= CKENA_23_STUART;
+ writel(readl(CKENA) | CKENA_23_STUART, CKENA);
#else
- CKEN |= CKEN5_STUART;
+ writel(readl(CKEN) | CKEN5_STUART, CKEN);
#endif /* CONFIG_CPU_MONAHANS */
- STIER = 0;
- STFCR = 0;
+ writel(0, STIER);
+ writel(0, STFCR);
/* set baud rate */
- STLCR = LCR_DLAB;
- STDLL = quot & 0xff;
- STDLH = quot >> 8;
- STLCR = LCR_WLS0 | LCR_WLS1;
+ writel(LCR_DLAB, STLCR);
+ writel(quot & 0xff, STDLL);
+ writel(quot >> 8, STDLH);
+ writel(LCR_WLS0 | LCR_WLS1, STLCR);
- STIER = IER_UUE; /* Enable STUART */
+ writel(IER_UUE, STIER); /* Enable STUART */
break;
default:
@@ -156,21 +157,21 @@ void pxa_putc_dev (unsigned int uart_index,const char c)
switch (uart_index) {
case FFUART_INDEX:
/* wait for room in the tx FIFO on FFUART */
- while ((FFLSR & LSR_TEMT) == 0)
+ while ((readl(FFLSR) & LSR_TEMT) == 0)
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
- FFTHR = c;
+ writel(c, FFTHR);
break;
case BTUART_INDEX:
- while ((BTLSR & LSR_TEMT ) == 0 )
+ while ((readl(BTLSR) & LSR_TEMT) == 0)
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
- BTTHR = c;
+ writel(c, BTTHR);
break;
case STUART_INDEX:
- while ((STLSR & LSR_TEMT ) == 0 )
+ while ((readl(STLSR) & LSR_TEMT) == 0)
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
- STTHR = c;
+ writel(c, STTHR);
break;
}
@@ -188,11 +189,11 @@ int pxa_tstc_dev (unsigned int uart_index)
{
switch (uart_index) {
case FFUART_INDEX:
- return FFLSR & LSR_DR;
+ return readl(FFLSR) & LSR_DR;
case BTUART_INDEX:
- return BTLSR & LSR_DR;
+ return readl(BTLSR) & LSR_DR;
case STUART_INDEX:
- return STLSR & LSR_DR;
+ return readl(STLSR) & LSR_DR;
}
return -1;
}
@@ -206,18 +207,21 @@ int pxa_getc_dev (unsigned int uart_index)
{
switch (uart_index) {
case FFUART_INDEX:
- while (!(FFLSR & LSR_DR))
- WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
- return (char) FFRBR & 0xff;
+ while (!(readl(FFLSR) & LSR_DR))
+ /* Reset HW Watchdog, if needed */
+ WATCHDOG_RESET();
+ return (char) readl(FFRBR) & 0xff;
case BTUART_INDEX:
- while (!(BTLSR & LSR_DR))
- WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
- return (char) BTRBR & 0xff;
+ while (!(readl(BTLSR) & LSR_DR))
+ /* Reset HW Watchdog, if needed */
+ WATCHDOG_RESET();
+ return (char) readl(BTRBR) & 0xff;
case STUART_INDEX:
- while (!(STLSR & LSR_DR))
- WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
- return (char) STRBR & 0xff;
+ while (!(readl(STLSR) & LSR_DR))
+ /* Reset HW Watchdog, if needed */
+ WATCHDOG_RESET();
+ return (char) readl(STRBR) & 0xff;
}
return -1;
}
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
index 200b61e..998e179 100644
--- a/include/configs/cradle.h
+++ b/include/configs/cradle.h
@@ -339,8 +339,6 @@
#define LED_IRDA1 2
#define LED_IRDA2 4
#define LED_IRDA3 6
-#define CRADLE_LED_SET_REG GPSR2
-#define CRADLE_LED_CLR_REG GPCR2
/* SuperIO defines */
#define CRADLE_SIO_INDEX 0x2e
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 9c46c5b..d930fb4 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -28,6 +28,7 @@
* (easy to change)
*/
#define CONFIG_CPU_MONAHANS 1 /* Intel Monahan CPU */
+#define CONFIG_CPU_PXA320
#define CONFIG_DELTA 1 /* Delta board */
/* #define CONFIG_LCD 1 */
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index d0fc138..c8aa046 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -35,6 +35,7 @@
* (easy to change)
*/
#define CONFIG_CPU_MONAHANS 1 /* Intel Monahan CPU */
+#define CONFIG_CPU_PXA320
#define CONFIG_ZYLONITE 1 /* Zylonite board */
/* #define CONFIG_LCD 1 */
--
1.7.1
More information about the U-Boot
mailing list