[U-Boot] [GIT PULL] Pull request: u-boot-imx

[Wolfgang Denk]

Dear Stefano Babic,

In message <4CB6C28D.8030307 at denx.de> you wrote:
> 
> please pull from u-boot-imx
> 
> The following changes since commit e79f48393dd919079b34f37957c933f8e75c164d:
>   Lei Wen (1):
>         env_mmc: fix cannot save env issue
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-imx master
> 
> Loic Minier (1):
>       mx51evk: add u-boot.imx to ALL target
> 
> Stefano Babic (6):
>       FPGA: add support for downloading Lattice bitstream
>       MX31: Adding missing iomux pin to MX.31 registers
>       MX31: Add support to update FPGA bitstream
>       MX31: add support for setting pin pads
>       MX31: Add support for MXC EHCI controller
>       MX31: Add USB Host support to the QONG board
> 
>  arch/arm/cpu/arm1136/mx31/generic.c        |   17 +
>  arch/arm/include/asm/arch-mx31/mx31-regs.h |  411 ++++
>  board/davedenx/qong/Makefile               |    2 +-
>  board/davedenx/qong/fpga.c                 |   95 +
>  board/davedenx/qong/qong.c                 |   44 +
>  board/davedenx/qong/qong_fpga.h            |    3 +-
>  board/freescale/mx51evk/config.mk          |    1 +
>  drivers/fpga/Makefile                      |    1 +
>  drivers/fpga/fpga.c                        |   11 +
>  drivers/fpga/ivm_core.c                    | 3167
> ++++++++++++++++++++++++++++
>  drivers/fpga/lattice.c                     |  399 ++++
>  drivers/usb/host/Makefile                  |    1 +
>  drivers/usb/host/ehci-mxc.c                |  130 ++
>  drivers/video/mx3fb.c                      |   31 -
>  include/configs/qong.h                     |   21 +-
>  include/fpga.h                             |    1 +
>  include/lattice.h                          |  319 +++
>  17 files changed, 4619 insertions(+), 35 deletions(-)
>  create mode 100644 board/davedenx/qong/fpga.c
>  create mode 100755 drivers/fpga/ivm_core.c
>  create mode 100644 drivers/fpga/lattice.c
>  create mode 100644 drivers/usb/host/ehci-mxc.c
>  create mode 100755 include/lattice.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It would be illogical to assume that all conditions remain stable
	-- Spock, "The Enterprise" Incident", stardate 5027.3