[U-Boot] [PATCH] FPGA: fix support for non-Lattice devices

[Wolfgang Denk]

Commit 3b8ac464 "FPGA: add support for downloading Lattice bitstream"
added support for Lattice devices, but failed to add #ifdef's that are
needed when building for non-Lattice devices, which results in build
failures like these:

Configuring for GEN860T board...
drivers/fpga/libfpga.a(fpga.o): In function `fpga_dev_info':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:145: undefined reference to `lattice_info'
drivers/fpga/libfpga.a(fpga.o): In function `fpga_dump':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:269: undefined reference to `lattice_dump'
drivers/fpga/libfpga.a(fpga.o): In function `fpga_load':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:233: undefined reference to `lattice_load'
make: *** [u-boot] Error 1

Add the missing code.

Signed-off-by: Wolfgang Denk <wd at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
---
 drivers/fpga/fpga.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/drivers/fpga/fpga.c b/drivers/fpga/fpga.c
index e41e728..a669039 100644
--- a/drivers/fpga/fpga.c
+++ b/drivers/fpga/fpga.c
@@ -141,8 +141,12 @@ static int fpga_dev_info( int devnum )
 #endif
 			break;
 		case fpga_lattice:
+#if defined(CONFIG_FPGA_LATTICE)
 			printf("Lattice Device\nDescriptor @ 0x%p\n", desc);
 			ret_val = lattice_info(desc->devdesc);
+#else
+			fpga_no_sup( (char *)__FUNCTION__, "Lattice devices" );
+#endif
 			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
@@ -230,7 +234,11 @@ int fpga_load( int devnum, void *buf, size_t bsize )
 #endif
 			break;
 		case fpga_lattice:
+#if defined(CONFIG_FPGA_LATTICE)
 			ret_val = lattice_load(desc->devdesc, buf, bsize);
+#else
+			fpga_no_sup( (char *)__FUNCTION__, "Lattice devices" );
+#endif
 			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
@@ -266,7 +274,11 @@ int fpga_dump( int devnum, void *buf, size_t bsize )
 #endif
 			break;
 		case fpga_lattice:
+#if defined(CONFIG_FPGA_LATTICE)
 			ret_val = lattice_dump(desc->devdesc, buf, bsize);
+#else
+			fpga_no_sup( (char *)__FUNCTION__, "Lattice devices" );
+#endif
 			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
-- 
1.7.2.3