[U-Boot] [PATCH v3] Add generic support for samsung s3c2440
Minkyu Kang
promsoft at gmail.com
Tue Oct 19 04:33:19 CEST 2010
Dear C Nauman,
I'm sorry to late review.
On 27 August 2010 00:43, C Nauman <cnauman at diagraph.com> wrote:
> This patch adds generic support for the Samsung s3c2440 processor.
>
> Global s3c24x0 changes to struct members converting from upper case to to
> lower case.
>
> Signed-off-by: Craig Nauman <cnauman at diagraph.com>
> Cc: kevin.morfitt at fearnside-systems.co.uk
>
> ---
> - v3 Fixup style problems checkpatch.pl yields one error from David's name
> - v2 Fix global s3c24x0 struct members to lower case as requested by Minkyu
> - v1 Start from patch posted by Kevin Morfitt 2009-06-19
>
> arch/arm/cpu/arm920t/s3c24x0/speed.c | 31 +-
> arch/arm/cpu/arm920t/s3c24x0/timer.c | 23 +-
> arch/arm/cpu/arm920t/s3c24x0/usb.c | 10 +-
> arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c | 12 +-
> arch/arm/include/asm/arch-s3c24x0/s3c2440.h | 163 ++++++
> arch/arm/include/asm/arch-s3c24x0/s3c24x0.h | 672
> +++++++++++++----------
> arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h | 2 +
> board/mpl/vcma9/vcma9.c | 41 +-
> board/samsung/smdk2400/smdk2400.c | 28 +-
> board/samsung/smdk2410/smdk2410.c | 36 +-
> board/sbc2410x/sbc2410x.c | 44 +-
> board/trab/cmd_trab.c | 28 +-
> board/trab/rs485.c | 40 +-
> board/trab/trab.c | 67 ++--
> board/trab/trab_fkt.c | 142 +++---
> board/trab/tsc2000.c | 39 +-
> board/trab/tsc2000.h | 86 ++--
> board/trab/vfd.c | 90 ++--
> drivers/i2c/s3c24x0_i2c.c | 102 ++--
> drivers/mtd/nand/s3c2410_nand.c | 25 +-
> drivers/rtc/s3c24x0_rtc.c | 52 +-
> drivers/serial/serial_s3c24x0.c | 26 +-
> 22 files changed, 1019 insertions(+), 740 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-s3c24x0/s3c2440.h
>
> diff --git a/arch/arm/cpu/arm920t/s3c24x0/speed.c
> b/arch/arm/cpu/arm920t/s3c24x0/speed.c
> index b13283a..c3e40d4 100644
> --- a/arch/arm/cpu/arm920t/s3c24x0/speed.c
> +++ b/arch/arm/cpu/arm920t/s3c24x0/speed.c
> @@ -54,9 +54,9 @@ static ulong get_PLLCLK(int pllreg)
> ulong r, m, p, s;
>
> if (pllreg == MPLL)
> - r = readl(&clk_power->MPLLCON);
> + r = readl(&clk_power->mpllcon);
> else if (pllreg == UPLL)
> - r = readl(&clk_power->UPLLCON);
> + r = readl(&clk_power->upllcon);
> else
> hang();
>
> @@ -64,7 +64,13 @@ static ulong get_PLLCLK(int pllreg)
> p = ((r & 0x003F0) >> 4) + 2;
> s = r & 0x3;
>
> +#if defined(CONFIG_S3C2440)
> + if (pllreg == MPLL)
> + return 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s));
> + else
maybe this else is not necessary
> +#endif
> return (CONFIG_SYS_CLK_FREQ * m) / (p << s);
> +
> }
>
> /* return FCLK frequency */
> @@ -77,8 +83,23 @@ ulong get_FCLK(void)
> ulong get_HCLK(void)
> {
> struct s3c24x0_clock_power *clk_power =
> s3c24x0_get_base_clock_power();
> -
> - return (readl(&clk_power->CLKDIVN) & 2) ? get_FCLK() / 2 :
> get_FCLK();
> +#ifdef CONFIG_S3C2440
> + switch (readl(&clk_power->clkdivn) & 0x6) {
> + default:
> + case 0:
> + return get_FCLK();
> + case 2:
> + return get_FCLK() / 2;
> + case 4:
> + return (readl(&clk_power->camdivn) & (1 << 9)) ?
> + get_FCLK() / 8 : get_FCLK() / 4;
> + case 6:
> + return (readl(&clk_power->camdivn) & (1 << 8)) ?
> + get_FCLK() / 6 : get_FCLK() / 3;
> + }
> +#else
> + return (readl(&clk_power->clkdivn) & 2) ? get_FCLK() / 2 :
> get_FCLK();
> +#endif
> }
>
> /* return PCLK frequency */
> @@ -86,7 +107,7 @@ ulong get_PCLK(void)
> {
> struct s3c24x0_clock_power *clk_power =
> s3c24x0_get_base_clock_power();
>
> - return (readl(&clk_power->CLKDIVN) & 1) ? get_HCLK() / 2 :
> get_HCLK();
> + return (readl(&clk_power->clkdivn) & 1) ? get_HCLK() / 2 :
> get_HCLK();
> }
>
> /* return UCLK frequency */
> diff --git a/arch/arm/cpu/arm920t/s3c24x0/timer.c
> b/arch/arm/cpu/arm920t/s3c24x0/timer.c
> index 7d47354..1512f12 100644
> --- a/arch/arm/cpu/arm920t/s3c24x0/timer.c
> +++ b/arch/arm/cpu/arm920t/s3c24x0/timer.c
> @@ -43,7 +43,7 @@ static inline ulong READ_TIMER(void)
> {
> struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
>
> - return readl(&timers->TCNTO4) & 0xffff;
> + return readl(&timers->tcnto4) & 0xffff;
> }
>
> static ulong timestamp;
> @@ -56,7 +56,7 @@ int timer_init(void)
>
> /* use PWM Timer 4 because it has no output */
> /* prescaler for Timer 4 is 16 */
> - writel(0x0f00, &timers->TCFG0);
> + writel(0x0f00, &timers->tcfg0);
> if (timer_load_val == 0) {
> /*
> * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
> @@ -68,13 +68,13 @@ int timer_init(void)
> }
> /* load value for 10 ms timeout */
> lastdec = timer_load_val;
> - writel(timer_load_val, &timers->TCNTB4);
> - /* auto load, manual update of Timer 4 */
> - tmr = (readl(&timers->TCON) & ~0x0700000) | 0x0600000;
> - writel(tmr, &timers->TCON);
> - /* auto load, start Timer 4 */
> + writel(timer_load_val, &timers->tcntb4);
> + /* auto load, manual update of timer 4 */
> + tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000;
> + writel(tmr, &timers->tcon);
> + /* auto load, start timer 4 */
> tmr = (tmr & ~0x0700000) | 0x0500000;
> - writel(tmr, &timers->TCON);
> + writel(tmr, &timers->tcon);
> timestamp = 0;
>
> return (0);
> @@ -181,6 +181,7 @@ ulong get_tbclk(void)
> tbclk = timer_load_val * 100;
> #elif defined(CONFIG_SBC2410X) || \
> defined(CONFIG_SMDK2410) || \
> + defined(CONFIG_S3C2440) || \
please tab instead of space.
> defined(CONFIG_VCMA9)
> tbclk = CONFIG_SYS_HZ;
> #else
> @@ -206,13 +207,13 @@ void reset_cpu(ulong ignored)
> watchdog = s3c24x0_get_base_watchdog();
>
> /* Disable watchdog */
> - writel(0x0000, &watchdog->WTCON);
> + writel(0x0000, &watchdog->wtcon);
>
> /* Initialize watchdog timer count register */
> - writel(0x0001, &watchdog->WTCNT);
> + writel(0x0001, &watchdog->wtcnt);
>
> /* Enable watchdog timer; assert reset at timer timeout */
> - writel(0x0021, &watchdog->WTCON);
> + writel(0x0021, &watchdog->wtcon);
>
> while (1)
> /* loop forever and wait for reset to happen */;
> diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb.c
> b/arch/arm/cpu/arm920t/s3c24x0/usb.c
> index e468ed0..226a3f6 100644
> --- a/arch/arm/cpu/arm920t/s3c24x0/usb.c
> +++ b/arch/arm/cpu/arm920t/s3c24x0/usb.c
> @@ -39,14 +39,14 @@ int usb_cpu_init(void)
> * Set the 48 MHz UPLL clocking. Values are taken from
> * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
> */
> - writel((40 << 12) + (1 << 4) + 2, &clk_power->UPLLCON);
> + writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon);
> /* 1 = use pads related USB for USB host */
> - writel(readl(&gpio->MISCCR) | 0x8, &gpio->MISCCR);
> + writel(readl(&gpio->misccr) | 0x8, &gpio->misccr);
>
> /*
> * Enable USB host clock.
> */
> - writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON);
> + writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
>
> return 0;
> }
> @@ -55,14 +55,14 @@ int usb_cpu_stop(void)
> {
> struct s3c24x0_clock_power *clk_power =
> s3c24x0_get_base_clock_power();
> /* may not want to do this */
> - writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON);
> + writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
> return 0;
> }
>
> int usb_cpu_init_fail(void)
> {
> struct s3c24x0_clock_power *clk_power =
> s3c24x0_get_base_clock_power();
> - writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON);
> + writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
> return 0;
> }
>
> diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
> b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
> index 5aa8d64..ccc9738 100644
> --- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
> +++ b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
> @@ -1666,13 +1666,13 @@ int usb_lowlevel_init(void)
> * Set the 48 MHz UPLL clocking. Values are taken from
> * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
> */
> - clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2);
> - gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */
> + clk_power->upllcon = ((40 << 12) + (1 << 4) + 2);
> + gpio->misccr |= 0x8; /* 1 = use pads related USB for USB host */
>
> /*
> * Enable USB host clock.
> */
> - clk_power->CLKCON |= (1 << 4);
> + clk_power->clkcon |= (1 << 4);
>
> memset(&gohci, 0, sizeof(struct ohci));
> memset(&urb_priv, 0, sizeof(struct urb_priv));
> @@ -1709,7 +1709,7 @@ int usb_lowlevel_init(void)
> if (hc_reset(&gohci) < 0) {
> hc_release_ohci(&gohci);
> /* Initialization failed */
> - clk_power->CLKCON &= ~(1 << 4);
> + clk_power->clkcon &= ~(1 << 4);
> return -1;
> }
>
> @@ -1722,7 +1722,7 @@ int usb_lowlevel_init(void)
> err("can't start usb-%s", gohci.slot_name);
> hc_release_ohci(&gohci);
> /* Initialization failed */
> - clk_power->CLKCON &= ~(1 << 4);
> + clk_power->clkcon &= ~(1 << 4);
> return -1;
> }
> #ifdef DEBUG
> @@ -1748,7 +1748,7 @@ int usb_lowlevel_stop(void)
> /* call hc_release_ohci() here ? */
> hc_reset(&gohci);
> /* may not want to do this */
> - clk_power->CLKCON &= ~(1 << 4);
> + clk_power->clkcon &= ~(1 << 4);
> return 0;
> }
>
> diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h
> b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h
> new file mode 100644
> index 0000000..7e4518e
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h
> @@ -0,0 +1,163 @@
> +/*
> + * (C) Copyright 2003
> + * David Müller ELSOFT AG Switzerland. d.mueller at elsoft.ch
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +/************************************************
> + * NAME : s3c2440.h
> + * Version : 31.3.2003
> + *
> + * Based on S3C2440 User's manual Rev x.x
> + ************************************************/
> +
> +#ifndef __S3C2440_H__
> +#define __S3C2440_H__
> +
> +#define S3C24X0_UART_CHANNELS 3
> +#define S3C24X0_SPI_CHANNELS 2
> +
> +/* S3C2440 only supports 512 Byte HW ECC */
> +#define S3C2440_ECCSIZE 512
> +#define S3C2440_ECCBYTES 3
> +
> +enum s3c24x0_uarts_nr {
> + S3C24X0_UART0,
> + S3C24X0_UART1,
> + S3C24X0_UART2
> +};
> +
> +/* S3C2440 device base addresses */
> +#define S3C24X0_MEMCTL_BASE 0x48000000
> +#define S3C24X0_USB_HOST_BASE 0x49000000
> +#define S3C24X0_INTERRUPT_BASE 0x4A000000
> +#define S3C24X0_DMA_BASE 0x4B000000
> +#define S3C24X0_CLOCK_POWER_BASE 0x4C000000
> +#define S3C24X0_LCD_BASE 0x4D000000
> +#define S3C2440_NAND_BASE 0x4E000000
> +#define S3C24X0_UART_BASE 0x50000000
> +#define S3C24X0_TIMER_BASE 0x51000000
> +#define S3C24X0_USB_DEVICE_BASE 0x52000140
> +#define S3C24X0_WATCHDOG_BASE 0x53000000
> +#define S3C24X0_I2C_BASE 0x54000000
> +#define S3C24X0_I2S_BASE 0x55000000
> +#define S3C24X0_GPIO_BASE 0x56000000
> +#define S3C24X0_RTC_BASE 0x57000000
> +#define S3C2440_ADC_BASE 0x58000000
> +#define S3C24X0_SPI_BASE 0x59000000
> +#define S3C2440_SDI_BASE 0x5A000000
> +
> +
please remove this space
> +/* include common stuff */
> +#include <asm/arch/s3c24x0.h>
> +
> +
Ditto.
> +static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void)
> +{
> + return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE;
> +}
> +
> +static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void)
> +{
> + return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE;
> +}
> +
> +static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void)
> +{
> + return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE;
> +}
> +
> +static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void)
> +{
> + return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE;
> +}
> +
> +static inline struct s3c24x0_clock_power
> *s3c24x0_get_base_clock_power(void)
> +{
> + return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE;
> +}
> +
> +static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void)
> +{
> + return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE;
> +}
> +
> +static inline struct s3c2440_nand *s3c2440_get_base_nand(void)
> +{
> + return (struct s3c2440_nand *)S3C2440_NAND_BASE;
> +}
> +
> +static inline struct s3c24x0_uart
> + *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n)
> +{
> + return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000));
> +}
> +
> +static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void)
> +{
> + return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE;
> +}
> +
> +static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void)
> +{
> + return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE;
> +}
> +
> +static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void)
> +{
> + return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE;
> +}
> +
> +static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void)
> +{
> + return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE;
> +}
> +
> +static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void)
> +{
> + return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE;
> +}
> +
> +static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void)
> +{
> + return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE;
> +}
> +
> +static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void)
> +{
> + return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE;
> +}
> +
> +static inline struct s3c2440_adc *s3c2440_get_base_adc(void)
> +{
> + return (struct s3c2440_adc *)S3C2440_ADC_BASE;
> +}
> +
> +static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void)
> +{
> + return (struct s3c24x0_spi *)S3C24X0_SPI_BASE;
> +}
> +
> +static inline struct s3c2440_sdi *s3c2440_get_base_sdi(void)
> +{
> + return (struct s3c2440_sdi *)S3C2440_SDI_BASE;
> +}
> +
> +#endif /*__S3C2440_H__*/
> diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h
> b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h
> index 15f53dd..f634d11 100644
> --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h
> +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h
> @@ -33,12 +33,12 @@
>
> /* Memory controller (see manual chapter 5) */
> struct s3c24x0_memctl {
> - u32 BWSCON;
> - u32 BANKCON[8];
> - u32 REFRESH;
> - u32 BANKSIZE;
> - u32 MRSRB6;
> - u32 MRSRB7;
> + u32 bwscon;
> + u32 bankcon[8];
> + u32 refresh;
> + u32 banksize;
> + u32 mrsrb6;
> + u32 mrsrb7;
> };
>
>
Thanks
Minkyu Kang
--
from. prom.
www.promsoft.net
More information about the U-Boot
mailing list