[U-Boot] [PATCH V4 1/1] MX5: rename mx51 to mx5
Stefano Babic
sbabic at denx.de
Tue Oct 19 12:38:25 CEST 2010
On 10/18/2010 05:09 AM, Jason Liu wrote:
> Rename mx51 to mx5 in order to support more mx51
> like-style SOCs such as MX53 and the followings.
>
> Signed-off-by: Jason Liu <r64343 at freescale.com>
>
> ---
> Changes for v2:
>
> Address the comments from Stefano Babic:
> - rebase
> - remove CONFIG_CPU_TYPE
> - remove copyright change
> - change vision2 board config
>
> Changes for v3:
> Address the comments from Wolfgang Denk:
> - Change CONFIG_HCLK_FREQ to CONFIG_SYS_MX5_HCLK
> - Change CONFIG_CLK32 to CONFIG_SYS_MX5_CLK32
> - Add "mx5" resp. "MX5" to the new identifier names.
>
> Changes for v4:
> - Remove unused is_soc_type definiton
> - Change the SOC_TYPE printing message
>
> ---
>
> Signed-off-by: Jason Liu <r64343 at freescale.com>
> ---
> arch/arm/cpu/armv7/{mx51 => mx5}/Makefile | 0
> arch/arm/cpu/armv7/{mx51 => mx5}/clock.c | 42 ++++++++++----------
> arch/arm/cpu/armv7/{mx51 => mx5}/iomux.c | 2 +-
> arch/arm/cpu/armv7/{mx51 => mx5}/lowlevel_init.S | 0
> arch/arm/cpu/armv7/{mx51 => mx5}/soc.c | 28 ++++++++-----
> arch/arm/cpu/armv7/{mx51 => mx5}/speed.c | 0
> arch/arm/cpu/armv7/{mx51 => mx5}/timer.c | 8 ++--
> arch/arm/cpu/armv7/{mx51 => mx5}/u-boot.lds | 0
> .../asm/{arch-mx51 => arch-mx5}/asm-offsets.h | 0
> .../include/asm/{arch-mx51 => arch-mx5}/clock.h | 0
> .../include/asm/{arch-mx51 => arch-mx5}/crm_regs.h | 0
> .../include/asm/{arch-mx51 => arch-mx5}/imx-regs.h | 0
> .../include/asm/{arch-mx51 => arch-mx5}/iomux.h | 8 ++--
> .../mx51_pins.h => arch-mx5/mx5x_pins.h} | 6 +-
> .../asm/{arch-mx51 => arch-mx5}/sys_proto.h | 0
> board/freescale/mx51evk/mx51evk.c | 2 +-
> board/ttcontrol/vision2/vision2.c | 2 +-
> boards.cfg | 4 +-
> include/configs/mx51evk.h | 4 +-
> include/configs/vision2.h | 4 +-
> 20 files changed, 58 insertions(+), 52 deletions(-)
Applied to u-boot-imx, thanks
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
More information about the U-Boot
mailing list