[U-Boot] [PULL] U-Boot-pxa pull request

Wolfgang Denk wd at denx.de
Wed Oct 20 00:07:23 CEST 2010


Dear Marek Vasut,

In message <201010192228.34814.marek.vasut at gmail.com> you wrote:
> Hi,
> please pull my git://git.denx.de/u-boot-pxa for-wd-testing branch into your u-
> boot-testing/Makefile-cleanup branch. Thanks
> 
> The following changes since commit a5cb985d8006bd1bb6d188b84f435f5d007fd6ac:
> 
>   Makefile: move all Power Architecture boards into boards.cfg (2010-10-17 
> 01:34:08 +0200)
> 
> are available in the git repository at:
>   git://git.denx.de/u-boot-pxa.git for-wd-testing
> 
> Marek Vasut (19):
>       PXA: pxafb: Fix indent problems
>       PXA: pxa-regs.h cleanup
>       PXA: pxafb: Add ACX517AKN support
>       PXA: pxafb: Add support for Sharp LQ038J7DH53
>       PXA: pxafb: Marvell Littleton LCD definition
>       common: Enable serial for PXA250
>       PXA: Palm Tungsten|C Support
>       PXA: Add initial Palm LifeDrive support
>       PXA: Voipac270 improvements
>       PXA: Balloon3 board support
>       PXA: Add missing MAINTAINERS entries
>       PXA: Add necessary information for RELOC
>       PXA: Fix reloc, Push lowlevel init into C code
>       PXA: Fix vpac270 for Reloc
>       PXA: Fix ZipitZ2 for Reloc
>       PXA: Fix Balloon3 for Reloc
>       PXA: Fix vpac270 OneNAND booter
>       Build: PXA: Fix Vpac270 build variants
>       Build: PXA: Fix TrizepsIV build variants
> 
> Mikhail Kshevetskiy (4):
>       PXA: remove unused u-boot.lds from board/vpac270
>       PXA: cleanup vpac270 config and set CONFIG_SYS_HZ to 1000
>       PXA: fix environment sector size, kernel and environment location for 
> vpac270
>       PXA: fix MDREFR[APD] bit setting
> 
>  MAINTAINERS                               |    9 +
>  MAKEALL                                   |    7 +-
>  Makefile                                  |   17 -
>  arch/arm/cpu/pxa/cpu.c                    |  255 +++-
>  arch/arm/cpu/pxa/i2c.c                    |   69 +-
>  arch/arm/cpu/pxa/pxafb.c                  |  365 +++--
>  arch/arm/cpu/pxa/start.S                  |  346 ++---
>  arch/arm/cpu/pxa/timer.c                  |    7 +-
>  arch/arm/cpu/pxa/usb.c                    |   61 +-
>  arch/arm/include/asm/arch-pxa/hardware.h  |   61 +-
>  arch/arm/include/asm/arch-pxa/macro.h     |   20 +-
>  arch/arm/include/asm/arch-pxa/pxa-regs.h  | 2688 +++++++++++++++--------------
>  board/balloon3/Makefile                   |   47 +
>  board/balloon3/balloon3.c                 |  238 +++
>  board/colibri_pxa270/colibri_pxa270.c     |   33 +-
>  board/cradle/cradle.c                     |    5 +-
>  board/cradle/lowlevel_init.S              |    4 +-
>  board/csb226/csb226.c                     |   13 +-
>  board/delta/delta.c                       |   37 +-
>  board/delta/nand.c                        |  110 +-
>  board/innokom/innokom.c                   |   14 +-
>  board/palmld/Makefile                     |   49 +
>  board/palmld/config.mk                    |    1 +
>  board/{zipitz2 => palmld}/lowlevel_init.S |    9 +-
>  board/palmld/palmld.c                     |   69 +
>  board/{vpac270 => palmld}/u-boot.lds      |    7 +-
>  board/palmtc/Makefile                     |   49 +
>  board/palmtc/config.mk                    |    1 +
>  board/{vpac270 => palmtc}/lowlevel_init.S |    3 +-
>  board/palmtc/palmtc.c                     |   59 +
>  board/{vpac270 => palmtc}/u-boot.lds      |    7 +-
>  board/pxa255_idp/pxa_idp.c                |   27 +-
>  board/trizepsiv/conxs.c                   |   35 +-
>  board/vpac270/Makefile                    |   17 +-
>  board/vpac270/config.mk                   |    1 -
>  board/vpac270/vpac270.c                   |   92 +-
>  board/wepep250/wepep250.c                 |   11 +-
>  board/zipitz2/Makefile                    |   10 +-
>  board/zipitz2/config.mk                   |    1 -
>  board/zipitz2/zipitz2.c                   |   57 +-
>  board/zylonite/nand.c                     |  110 +-
>  boards.cfg                                |    8 +
>  common/serial.c                           |    2 +-
>  drivers/mmc/pxa_mmc.c                     |   98 +-
>  drivers/serial/serial_pxa.c               |   94 +-
>  include/configs/balloon3.h                |  274 +++
>  include/configs/cerf250.h                 |    3 +
>  include/configs/colibri_pxa270.h          |    3 +
>  include/configs/cradle.h                  |    5 +-
>  include/configs/csb226.h                  |    3 +
>  include/configs/delta.h                   |    4 +
>  include/configs/innokom.h                 |    3 +
>  include/configs/lubbock.h                 |    3 +
>  include/configs/palmld.h                  |  276 +++
>  include/configs/palmtc.h                  |  248 +++
>  include/configs/pleb2.h                   |    3 +
>  include/configs/pxa255_idp.h              |    3 +
>  include/configs/trizepsiv.h               |    3 +
>  include/configs/vpac270.h                 |  138 +-
>  include/configs/wepep250.h                |    4 +
>  include/configs/xaeniax.h                 |    3 +
>  include/configs/xm250.h                   |    3 +
>  include/configs/xsengine.h                |    3 +
>  include/configs/zipitz2.h                 |   10 +-
>  include/configs/zylonite.h                |    3 +
>  onenand_ipl/board/vpac270/Makefile        |    5 +-
>  66 files changed, 4017 insertions(+), 2206 deletions(-)
>  create mode 100644 board/balloon3/Makefile
>  create mode 100644 board/balloon3/balloon3.c
>  create mode 100644 board/palmld/Makefile
>  create mode 100644 board/palmld/config.mk
>  rename board/{zipitz2 => palmld}/lowlevel_init.S (90%)
>  create mode 100644 board/palmld/palmld.c
>  copy board/{vpac270 => palmld}/u-boot.lds (90%)
>  create mode 100644 board/palmtc/Makefile
>  create mode 100644 board/palmtc/config.mk
>  rename board/{vpac270 => palmtc}/lowlevel_init.S (95%)
>  create mode 100644 board/palmtc/palmtc.c
>  rename board/{vpac270 => palmtc}/u-boot.lds (90%)
>  delete mode 100644 board/vpac270/config.mk
>  delete mode 100644 board/zipitz2/config.mk
>  create mode 100644 include/configs/balloon3.h
>  create mode 100644 include/configs/palmld.h
>  create mode 100644 include/configs/palmtc.h

Dunno what was wrong with your tree.

Cherry-picked the commits one by one.

Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
So we follow our wandering paths, and the very darkness acts  as  our
guide and our doubts serve to reassure us. - Jean-Pierre de Caussade,
eighteenth-century Jesuit priest


More information about the U-Boot mailing list