[U-Boot] [PATCH v2 1/2] Adding fixed sdram setting for cornet_ds board

[Kumar Gala]

On Oct 18, 2010, at 3:46 PM, York Sun wrote:

> 800, 900, 1000, 1200MT/s data rate parameters are added for fixed sdram
> setting. SPD based parameters and fixed parameters can be toggled by hwconfig.
> To use fixed parameters,
> 
> hwconfig=fsl_ddr:sdram=fixed
> 
> To use SPD parameters,
> 
> hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1
> 
> Signed-off-by: York Sun <yorksun at freescale.com>
> ---
> arch/powerpc/include/asm/fsl_ddr_sdram.h |    6 +
> board/freescale/corenet_ds/Makefile      |    8 +-
> board/freescale/corenet_ds/corenet_ds.c  |   15 --
> board/freescale/corenet_ds/ddr.c         |  131 +++++++++++-
> board/freescale/corenet_ds/p3041ds_ddr.c |   14 ++
> board/freescale/corenet_ds/p4080ds_ddr.c |  356 ++++++++++++++++++++++++++++++
> board/freescale/corenet_ds/p5020ds_ddr.c |   18 ++
> include/configs/corenet_ds.h             |   60 +-----
> 8 files changed, 529 insertions(+), 79 deletions(-)
> create mode 100644 board/freescale/corenet_ds/p3041ds_ddr.c
> create mode 100644 board/freescale/corenet_ds/p4080ds_ddr.c
> create mode 100644 board/freescale/corenet_ds/p5020ds_ddr.c

applied to 85xx, but removed p3041/p5020 stuff as its not upstream yet.

- k