[U-Boot] [PATCH] powerpc: always print the RAM relocated address when boot up

[Roy Zang]

The RAM relocated address is useful when debugging or there is u-boot
crash dump.  So always print it instead of debug.

Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
Cc: Wood Scott-B07421 <B07421 at freescale.com>
---
 arch/powerpc/lib/board.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index c0c7fd4..74a9856 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -639,7 +639,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	serial_initialize();
 #endif
 
-	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+	printf("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 
 	WATCHDOG_RESET ();
 
-- 
1.5.6.5